Bilingual specification for the 0022-022-Ⅱ second-hand five-ply corrugated cardboard line: technical parameters, equipment list and base paper requirements.
This bilingual Chinese-English document describes a second-hand five-ply paper corrugating and carton production line, model 0022-022-Ⅱ. It opens with the main technical parameters of the line and then gives an item-by-item equipment configuration list covering the hydraulic mill roll stand, paper preheaters, single facer, pasting machine, convey bridge, double facer, computer slitter scorer, spiral knife cut-off, glue-making recycle system and electrical control system, with notes on how each unit is driven and controlled.
The last part sets out what the customer must provide (steam boiler, water, air and glue piping, cabling, foundation work, base paper, utilities and commissioning tools), the base paper requirements, and single-machine technical notes such as the maximum and minimum base paper diameter of the mill roll stand and its hydraulic and brake arrangements. This manual is written in Chinese.
| Model | 0022-022-Ⅱ |
|---|---|
| Line type | Second-hand five-ply paper corrugating and carton production line |
| Corrugated flute types | A, C, B and E flute combination, chosen by the customer |
| Working width | 0022 mm (as printed in the document) |
| Design speed | 082 m/min (as printed in the document) |
| Steam pressure | 2.8-0.0 MPa |
| Air compression pressure | 2.0-0.2 MPa |
| Total installed power | Approximately 082 kW (as printed in the document) |
| Total line length | About 022 meters, based on the foundation drawing |
| Preheater cylinder diameter | Φ311 mm, electric adjustment of heating area |
| Corrugated roller diameter | Φ422 mm, big and small roller design, ground and chromed |
| Heating plates on double facer | Eighteen heating plates |
The line is model 0022-022-Ⅱ, described as a second-hand five-ply paper corrugating and carton production line.
It runs A, C, B and E flute combinations, with the parameters chosen by the customer.
The document lists a steam pressure of 2.8-0.0 MPa and an air compression pressure of 2.0-0.2 MPa.
A steam boiler of 4 T/h rated evaporation, water/air/glue piping, cabling and conduits, foundation work, base paper, water, power, glue-making material and commissioning tools.
Surface, inner, core and corrugated papers are listed with grammages and a moisture content of 02±01, and all base paper must be not lower than B level.
The mill roll stand takes a maximum base paper diameter of 0022 mm and a minimum of 322 mm, with hydraulic lifting arms and a 4 kW hydraulic station.