KB-6167F/KB-6067F Processing Guide, This Processing Guide is edited in accordance with the IPC-4101 standard, and based on this standard, it is organized according to the internal test results of product characteristics and the actual use of customers, so that customers are more conducive to the use of KB- 6167F/KB-6067F.
This guide provides detailed instructions for handling and processing Hitachi KB-6167F/KB-6067F laminates, including storage conditions for CCL and prepreg, pressing parameters, drilling settings, and etching controls. It also includes health and safety precautions for handling materials.
The guide is based on IPC-4101 standards and includes specific temperature, pressure, and time parameters for each process step, with recommendations for adjusting settings based on actual use conditions. This manual is written in Chinese.
| Relative Humidity for Prepreg | Less than 60% |
|---|---|
| Pressing Pressure | 300-400 psi |
| Curing Temperature | At least 190°C |
Drilling parameters vary by drill diameter, with speeds and feed rates listed in Table 2, adjusted for tool and board thickness.
Etching control requirement is 0.1-0.4mg/c㎡, typically requiring 1-2 etching cycles.