Error Codes

Error, fault and alarm codes of products - what each code means, its causes and what to do - read from the manufacturers’ manuals, with the manual page each answer comes from.

• CodeRamsey Micro-Tech 3100 Error A3.11: EXTERN ALAM 1

  EXTERN ALAM 1 indicates an external alarm condition. The manual lists no action for this code.

• CodeRamsey Micro-Tech 3100 Error A2.00: CAL TIME ELAPSED

  The system has detected an elapsed time calibration issue. The manual lists no action for this code.

• CodeRamsey Micro-Tech 3100 Error A2.01: PWD DURING CALIB

  PWD DURING CALIB indicates a power-down event during calibration. The manual lists no action for this code.

• CodeRamsey Micro-Tech 3100 Error A2.02: COLD START

  The system detected a cold start condition. The manual lists no action for this code.

• CodeRamsey Micro-Tech 3100 Error A2.03: WARM START

  The system is initiating a warm start procedure. The manual lists no action for this code.

• CodeRamsey Micro-Tech 3100 Error A2.08: THRESHOLD#4

  THRESHOLD#4 error indicates a threshold condition has been triggered. The manual lists no action for this code.

• CodeRamsey Micro-Tech 3100 Error A2.13: THRESHOLD#3

  THRESHOLD#3 error indicates a threshold condition has been triggered. The manual lists no action for this code.

• Code listRamsey Micro-Tech 3100 Error Codes

  All 21 error codes of the Ramsey Micro-Tech 3100 Ramsey Micro-Tech 3100 with their meaning, causes and what to do, taken from the manufacturer's manual with page references.

• CodeGill Instruments MetPak Pro 723-1B-2-111 Error XX: More than one fault

  The system detected multiple sensor faults simultaneously. The manual lists no action for this code.

• CodeGill Instruments MetPak Pro 723-1B-2-111 Error 80: Pressure Sensor Warning

  The system indicates a problem with the pressure sensor reading or unit. The manual lists no action for this code.

• CodeGill Instruments MetPak Pro 723-1B-2-111 Error 67: Wind Sensor RS232 Communications

  Wind Sensor RS232 Communications error indicates a wiring issue with the wind sensor. The manual lists no action for this code.

• CodeGill Instruments MetPak Pro 723-1B-2-111 Error 66: Wind Sensor Power

  The Wind Sensor Power code 66 indicates a power issue with the wind sensor. The manual lists no action for this code.

• CodeGill Instruments MetPak Pro 723-1B-2-111 Error 40: Humidity error

  Humidity error code 40 indicates a faulty Hygroclip. The manual lists no action for this code.

• CodeGill Instruments MetPak Pro 723-1B-2-111 Error 20: Dewpoint error

  The system detected an error in the dewpoint measurement. The manual lists no action for this code.

• CodeGill Instruments MetPak Pro 723-1B-2-111 Error 10: Hygroclip error

  Hygroclip error indicates a faulty Hygroclip. The manual lists no action for this code.