Error, fault and alarm codes of products - what each code means, its causes and what to do - read from the manufacturers’ manuals, with the manual page each answer comes from.
The phone-adapter link is reserved. The manual lists no action for this code.
There is no connection to the phone. The manual lists no action for this code.
The phone has failed. The manual lists no action for this code.
All 106 error codes of the Telit HE910 Telit HE910 with their meaning, causes and what to do, taken from the manufacturer's manual with page references.
Light intensity is saturated due to specular reflection entering the sensor from the sensor head. The manual lists no action for this code.
Reading exceeds detection distance range when no workpiece or background is present, or light isn't entering the receiver. The manual's first action is: “Set a workpiece or background in the distance for detection fro…
EEPROM error occurs when data has been written over 1 million times and can no longer be updated. The manual's first action is: “Perform initialization. If you need to write more data, replace the amplifier unit.”
Overcurrent error happens when too much current flows through the output wire. The manual's first action is: “Check the load and reduce the current to be within the rated range. Check that the output wire does not tou…
Head error occurs when the sensor head is disconnected, its cable is broken, or it is damaged. The manual's first action is: “Check that the sensor head is connected.”
All 5 error codes of the Keyence GV Series digital CMOS laser sensor with their meaning, causes and what to do, taken from the manufacturer's manual with page references.
No water pressure with circulating pump ON. The manual lists no action for this code.
No water pressure with low speed jets ON. The manual lists no action for this code.
Temperature sensor open or disconnected. The manual lists no action for this code.
Water temperature above 108 F. The manual lists no action for this code.
No water pressure with high speed jets ON. The manual lists no action for this code.