Industrial

The LT1203/LT1205 150MHz Video Multiplexers are wideband 2-input video multiplexers designed for pixel switching and broadcast quality routing. The LT1205 is a dual version that is configured as a 4-input, 2-output multiplexer. These multiplexers act as SPDT video switches with 10ns transition times at toggle rates up to 30MHz. The –3dB bandwidth is 150MHz and 0.1dB gain flatness is 30MHz. Many parts can be tied together at their outputs by using the enable feature which reduces the power dissipation and raises the output impedance to 10MΩ. Output capacitance when disabled is only 3pF and the LT1203 peaks less than 3dB into a 50pF load. Channel crosstalk and disable isolation are greater than 90dB up to 10MHz. An on-chip buffer interfaces to fast TTL or CMOS logic. Switching transients are only 50mV with a 25ns duration. The LT1203 and LT1205 outputs are protected against shorts to ground. The LT1203/LT1205 are manufactured using Linear Technology’s proprietary complementary bipolar process. The LT1203 is available in both the 8-lead PDIP and SO package while the LT1205 is available in a 16-lead SO package.

ADV7390/ADV7391/ADV7392/ADV7393 is a low power, chip scale, 10-bit SD/HD video encoder. It features high quality 10-bit video DACs, supports multiple video input and output formats, and has advanced power management capabilities.

This data sheet provides detailed information on the features and specifications of ADV7342/ADV7343.

This data sheet introduces the ADv7340/ADV7341 multiformat video encoder, which can encode various format video inputs (including composite, S-Video, YPrPb, and RGB) to HDCP-compliant SDI output. The encoder uses 6 12-bit Noise Shaped Video (NSV) DACs to provide high-quality video output. The encoder also supports simultaneous SD and ED/HD operation.

The AD6633 is a multichannel digital upconverter with VersaCREST™ crest reduction engine. It features 4 or 6 wideband digital upconverter channels and a VersaCREST crest reduction engine that reduces demands on external power amplifiers.

The AD6623 is a 4-channel, 104 MSPS digital transmit signal processor (TSP). It features 18-bit parallel digital IF output in real or interleaved complex format. It also supports 18-bit bidirectional parallel digital IF input/output and allows cascading of multiple chips for additional channels.

AD6636 is a 150 MSPS, wideband digital downconverter (DDC) from Analog Devices.

AD6634 is an 80 MSPS, dual-channel WCDMA Receive Signal Processor (RSP).

The AD6620 is a 67 MSPS digital receive signal processor that supports real, dual real, or complex inputs and provides serial or parallel outputs.

PSOT03 thru PSOT36C STANDARD CAPACITANCE TVS ARRAY is a ESD protection device launched by Protek Devices. It features ESD protection > 40 kilovolts, 500 watts peak pulse power, low clamping voltage, multiple voltage types, unidirectional and bidirectional configurations, and RoHS compliance.

TE tmCH T431616D/E is a SDRAM memory module produced by TE tmCH company. It has a fast access time of 5/6/7ns, a fast clock rate of 200/166/143MHz, a standard and low power self-refresh mode, an internal pipelined structure, 512K word x 16-bit x 2-bank, programmable mode registers, LDQM and UDQM controlled single bytes, automatic refresh and self-refresh, 4096 refresh cycles/64ms, CKE power down mode, JEDEC standard +3.3V±0.3V power supply, LVTTL interface, 50-pin 400 mil plastic TSOP II package, 60-ball, 6.4x10.1mm VFBGA package, TSOP II and VFBGA both offer lead-free packaging, and T431616E has low operating current.