Industrial

The device is a 10Gb/s DWDM EA modulator and DFB laser with GPO RF connector, suitable for STM-64/OC-192 DWDM 100GHz applications, with low dispersion penalty over 40km. It features high output power, low modulation voltage, long haul performance, and no wavelength locker required.

This document is about the EM55000S supplier query. It introduces the features and characteristics of the product, including brand, model, price, etc.

The EL9200, EL9201, and EL9202 are programmable VCOM amplifiers for use in TFT-LCD displays. Featuring 1, 2, and 4 channels of VCOM amplification, respectively, each device features just a single programmable current source for adding offset to one VCOM output. This current source is programmable using a single wire interface to one of 128 levels. The value is stored on an internal EEPROM memory. The EL9200 is available in the 12-pin DFN package and the EL9201 and EL9202 are available in 24-pin QFN packages. All are specified for operation over the -40°C to +85°C temperature range.

The EL5156, EL5157, EL5256, and EL5257 are 600MHz bandwidth -3dB voltage mode feedback amplifiers with DC accuracy of <0.01%, 1mV offsets and 40kV/V open loop gains. These amplifiers are ideally suited for applications ranging from precision measurement instrumentation to high speed video and monitor applications demanding the very highest linearity at very high frequency.

EEEFK0J101P Aluminum Electrolytic Capacitor

This document provides a detailed overview of the Intel 28F002B 16-KB 3.3 V serial Flash memory device features and operation.

This document introduces the features and characteristics of the AT89C51SND1C/AT83C51SND1C MP3 decoder. The product supports MPEG I/II-Layer 3 hardware decoding, supports 48, 44.1, 32, 24, 22.05, 16 kHz sampling rate, supports left and right channel digital volume control, bass, medium, treble control, bass boost sound effect, ancillary data extraction, CRC error and MPEG frame synchronization indicators, supports PCM format and I2S format audio output, with 8-bit MCU C51 core, 2304 bytes of internal RAM, 64K bytes of code storage, 4K bytes of boot flash storage, USB 1.1 controller, full speed data transmission, built-in PLL, MP3 audio clock, USB clock, MultiMedia Card interface compatibility, Atmel DataFlash SPI interface compatibility, IDE/ATAPI interface, 2 channels 10-bit ADC, 8 kHz (8 True Bit), battery voltage monitoring, software controlled voice recording, up to 44 bits of general-purpose I/Os, 4-bit interrupt keyboard port for a 4 x n matrix, SmartMedia software interface, standard two 16-bit counters, hardware watchdog timer, standard full duplex UART, baud rate generator, two wire interface (TWI) master and slave mode controller, SPI master and slave mode controller, power management, power-on reset, software programmable MCU.

5-90 is the general term for SN54/74LS90, SN54/74LS92 and SN54/74LS93, which are all composed of 4-bit binary counters and can achieve BCD, binary, modulo 12, and modulo 16 counting

DM74ALS540A is a Octal Inverting Buffer and Line Driver with 3-STATE Outputs product produced by Fairchild Semiconductor Corporation

DF22 series high-current connectors are designed for internal power supplies. The maximum current is 30 A. The connectors have a complete locking function, preventing incorrect connections. They have molded-in contact retention tabs and built-in posts, preventing incorrect board placement. The connectors can be encapsulated up to 10 mm without affecting the performance.

This document describes the DF005S to DF10S series of miniature glass passivated single-phase surface mount bridge rectifiers. Features include a plastic package with UL94V-0 flammability classification, glass passivated chip junctions, high surge overload rating, ideal for printed circuit boards, high temperature soldering guaranteed, and various maximum ratings and electrical characteristics.

M/A-COM's DCG-10-4 is a 5-30 11 dB Directional Coupler with a frequency range of 30 - 1000 MHz. This product has a wide frequency range and stable coupling performance, and can be used in various electronic devices.

This document describes the features and characteristics of the DBF60 Silicon Diffused Junction Type 6.0A Single-Phase Bridge Rectifier from SANYO Electric Co.,Ltd. Semiconductor Bussiness Headquarters. It includes glass passivation for high reliability, plastic molded structure, peak reverse voltage, average rectified current, etc.