Industrial

The ADP1109A is a versatile step-up switching regulator. The device requires only minimal external components to operate as a complete sw

The ADP1109 is a versatile step-up switching regulator. The device requires only minimal external components to operate, with a wide input voltage range of 2V to 12V, and the output options include fixed 3.3V, 5V, and 12V, as well as an adjustable output.

The ADP1108 is a highly versatile micropower switch-mode DC-DC converter that operates from an input voltage supply as low as 2.0 V and typically starts up from 1.8 V. The ADP1108 can be programmed into a step-up or step-down DC-to-DC converter with only three external components. The fixed outputs are 3.3 V, 5 V and 12 V. An adjustable version is also available. In step-up mode, supply voltage range is 2.0 V to 12 V, and 30 V in step-down mode. The ADP1108 can deliver 150 mA at 5 V from a 2 AA cell input and 300 mA at 5 V from a 9 V input in step-down mode. Switch current limit can be programmed with a single resistor. For battery operated and power conscious applications,

ADP1073 is a micropower DC-DC converter from Analog Devices, with adjustable and fixed 3.3V, 5V, 12V output.

The PRECISION SEMICONDUCTOR PRESSURE SENSOR PF (ADP1) is a pressure sensor that uses a semiconductor strain gauge method, and has high accuracy, linearity, and excellent repeatability of pressure characteristics.

The product is a multi-format video decoder that supports NTSC-(J, M, 4.43), PAL-(B/D/G/H/I/M/N), SECAM formats. It integrates three 54 MHz, Noise Shaped Video®, 12-bit ADCs, clocked from a single 28 MHz crystal. It has Adaptive-Digital-Line-Length-Tracking (ADLLT™), signal processing, and enhanced FIFO management functions, which can lock to weak, noisy, and unstable video sources (such as VCRs and tuners) and provide subcarrier frequency lock and status information output.

The ADuC846 is a microcontroller from Analog Devices that integrates high-resolution Sigma-Delta ADCs, a 16-bit processor, and 62kB FLASH flash memory

The ADT7466 dBCool controller is a complete thermal monitor and dual fan controller for low acoustic noise notebook PCs. It features the ability to monitor two analog voltages or thermistor temperature inputs, control and monitor the speed of up to two fans, automatic fan speed control mode based on measured temperature, enhanced acoustic mode to reduce user perception of changing fan speeds, thermal protection feature via THERM output to monitor the performance impact of Intel® Pentium® 4 processor thermal control circuit, and 3-wire fan speed measurement with limit comparison of all monitored values via SMBus 1.1 serial interface.

ADN2819 is a multirate to 2.7 Gb/s clock and data recovery IC with integrated limiting amp produced by Analog Devices, with excellent performance.

This document describes the features and characteristics of the ADM1073 48V hot swap controller.

ADM1069ACP is a closed-loop limiting system with programmable reset generators, configurable output drivers, programmable function inputs, selectable attenuators, device controller, EEPROM and SMBus interface.

This document describes the features and characteristics of the Super Sequencer™ with Margining Control and Auxiliary ADC Inputs ADM1066 Rev. 0 product, including a complete supervisory and sequencing solution, 10 supply fault detectors, 5 selectable input attenuators, 5 dual-function inputs, 10 programmable output drivers, and a sequencing engine implementing state machine control.

This document describes the features and characteristics of the ADM1030/31 evaluation board, including optimization for Pentium III processors, programmable and automatic fan speed control, remote temperature measurement, etc.

EVAL-ADM1028 is an evaluation board from Analog Devices that allows the ADM1028 PC Temperature Monitor and Fan Control ASIC to be quickly and easily evaluated using a personal computer. EVAL-ADM1028 supports SMBus communication and has fault tolerant fan control functionality.