Industrial

This is a user guide for Extech Manometer Model HD700. It introduces the function and features of the instrument, such as measurement range, unit, interface, etc.

The Extech Manometer Model HD750 is a heavy-duty differential pressure gauge that measures pressure in the range of ±5.000 psi. It offers eleven selectable units of measure and has a differential input with quick-disconnect fittings. Advanced features include data hold, min-max-avg record mode, zero/offset, auto power off, and USB PC interface.

The product is mainly used for measuring air pressure, differential pressure, vacuum, supports 11 kinds of unit measurement, has data storage, recording function, has large screen LCD display, backlight lighting, zero correction and other functions.

The AM24LC16 is a 2-wire serial 16K-bit (2048 x 8) CMOS electrically erasable PROM. It features non-volatile data storage, a 2-wire I2C serial interface, hardware write protection, 16-byte page write mode, and more.

AM24LC21 is a 128 x 8-bit dual-mode Electrically Erasable PROM manufactured by Anachip Corp. It features single supply with operation down to 2.5V, completely implements DDC1/DDC2 interface for monitor identification, including recovery to DDC1, low power CMOS technology, 1 mA typical active current, 10 uA standby current typical at 5.5V, 2-wire serial interface bus, I2C compatible, 100Khz (2.5V) and 400Khz (5V) compatibility, Self-timed write cycle, Hardware write-protect pin, Page-write buffer, 1,000,000 erase/write cycles, Data retention > 40 years, 8-pin PDIP and SOP packages, Available for extended temperature ranges Commercial (C): 0°C to +70°C Industrial (I): -40°C to +85°C

Anachip's AM24LC08 is a non-volatile, 8192-bit serial EEPROM that conforms to all I2C 2 wire protocol specifications. The AM24LC08 communication protocol uses CLOCK(SCL) and DATA I/O(SDA) lines to synchronously clock data between the master (for example a microcomputer)and the slave EEPROM devices(s) .In addition, the bus structure allows for a maximum of 8 devices to be connected to the bus. The AM24LC08 has a 16-byte page write mode to minimize the total write time per word. The AM24LC08 has a self-timed write cycle (including auto-erase). The AM24LC08 has a 40-year data retention period, a minimum of 1M write/erase cycles per word, unlimited read cycles, ESD protection and low standby current. The AM24LC08 is available in PDIP-8L and SOP-8L packages.

The document describes a product called 24LC02. The product is an ATC circuit with pins such as VCC, WP, SCL, SDA, A0, A1, A2, and VSS. It is a memory chip with specific features and characteristics.

This document is the 1999 PCIBus Solutions Data Manual for PCI2250 PCI-to-PCI Bridge. It provides information and features of the PCI2250 supplier.

PCI2060 Asynchronous PCI-to-PCI Bridge Data Manual, this product is a PCI bridge produced by TI.

AM24LC04 is a 2-wire serial 4K-bit CMOS electrically erasable PROM with features including non-volatile data storage, standard voltage and low voltage operation, 16-byte page write mode, self-timed write-cycle, etc.

This document is a data book for the TM5400/TM5600 processor, including the features and characteristics of the product.

TM55RZ/EZ-M,-H is a medium power module produced by MITSUBISHI. The maximum average on-state current is 55A, the maximum average forward current is 55A, the maximum repetitive peak reverse voltage is 400/800V, the maximum repetitive peak off-state voltage is 400/800V, UL certified, suitable for DC motor control, NC equipment, AC motor control, contactless switches, electric furnace temperature control, light dimmers and other occasions.