Industrial

The PDIUSBD12 is a cost and feature optimized USB device. It is normally used in microcontroller based systems and communicates with the system microcontroller over the high-speed general purpose parallel interface. It also supports local DMA transfer. This modular approach to implementing a USB interface allows the designer to choose the optimum system microcontroller from the available wide variety. This flexibility cuts down the development time, risks, and costs by allowing the use of the existing architecture and minimize firmware investments. This results in the fastest way to develop the most cost effective USB peripheral solution. The PDIUSBD12 fully conforms to the USB specification Rev. 2.0 (basic speed). It is also designed to be compliant with most device class specifications: Imaging Class, Mass Storage Devices, Communication Devices, Printing Devices, and Human Interface Devices. As such, the PDIUSBD12 is ideally suited for many peripherals like Printer, Scanner, External Mass Storage (Zip Drive), Digital Still Camera, etc. It offers an immediate cost reduction for applications that currently use SCSI implementations. The PDIUSBD12 low suspend power consumption along with the LazyClock output allows for easy implementation of equipment that is compliant to the ACPI™, OnNOW™, and USB power management requirements. The low operating power allows the implementation o...

The ISSI IS41C4100 and IS41LV4100 are 1,048,576 x 4-bit high-performance CMOS Dynamic Random Access Memory with accelerated cycle access EDO Page Mode. EDO Page Mode allows 512 random accesses within a single row with access cycle time as short as 10ns per 4-bit word. These features make the IS41C4100 and IS41LV4100 ideally suited for high band-width graphics, digital signal processing, high-performance computing systems, and peripheral applications.

The file provides POWER DIP 24 20+2+2 product specifications, including package materials, thermal conductivity, thermal resistance, etc.

This product is a 1-port 400 Mbps physical layer interface that supports the IEEE 1394–1995 Standard and the P1394a–2000 Standard, and supports Firewire and i.LINK implementations of the IEEE 1394 Standard.

The ADT7310/ADT7410 evaluation board allows you to evaluate all features of the ADT7310/ADT7410 high accuracy temperature sensors. There are two boards—the main evaluation board and the secondary evaluation board—within the evaluation kit that have both the ADT7410 and ADT7310 on board. The secondary board connects to the main board and can be used to measure temperatures that are remote from the main board while still using the evaluation software.

The ADE7763 Rev. B is a single-phase active and apparent energy metering IC produced by Analog Devices. It supports IEC 61036/60687, IEC62053-21 and IEC62053-22 standards, features high accuracy, on-chip digital integrator, support direct interface to current sensors, etc.

PDI1394P25 is a 1-port 400 Mbps physical layer interface that fully supports the IEEE 1394-1995 Standard and the P1394a-2000 Standard, and can be interoperable with Firewire and i.LINK implementations of the IEEE 1394 Standard.

PDI1394P24 is a 2-port 400 Mbps physical layer interface that fully supports the IEEE 1394-1995 Standard and the P1394a-2000 Standard. It is fully interoperable with Firewire and i.LINK implementations of the IEEE 1394 Standard. It provides two 1394a fully-compliant cable ports at 100/200/400 Megabits per second (Mbps) and includes power down features to conserve energy in battery-powered applications.

PDI1394P24 is a 2-port 400Mbps physical layer interface from Philips Semiconductors. It fully supports the IEEE 1394-1995 Standard and the P1394a-2000 Standard and is fully interoperable with Firewire and i.LINK implementations of the IEEE 1394 Standard.

ISSI 256K x 16 (4-MBIT) DYNAMIC RAM WITH FAST PAGE MODE

This document describes the features and characteristics of ISSI's IS41C16257A and IS41LV16257A high-performance CMOS dynamic random access memories, including fast access and cycle time, TTL compatible inputs and outputs, refresh interval and mode, JEDEC standard pinout, and single power supply.

PDI1394P23 is a 2-port/1-port 400 Mbps physical layer interface that fully supports the provisions of IEEE 1394-1995 Standard and P1394a-2000 Standard. It is fully interoperable with Firewire and i.LINK implementations of the IEEE 1394 Standard. It provides two 1394a fully-compliant cable ports at 100/200/400 Mbps and supports extended bias-handshake time for enhanced interoperability with camcorders.

PDI1394P21 is a 3-port physical layer interface device released by Philips Semiconductors, which supports the IEEE 1394 standard and has a transmission speed of 100/200/400Mbps.