Industrial

The BT-50SB is a 2.84 cubic inch [46.5cc] engine manufactured by FUJI-IMVAC INC. It has a horsepower of 5.2 hp @ 9,000 rpm and features CDI ignition style with automatic timing module. The engine operates in the RPM range of 1,200 – 9,000 rpm and uses gas/2-cycle engine oil fuel. It weighs 4.8 lb [2.2kg] with the muffler. The document also provides safety tips and warnings including the use of balanced spinner and prop, securely tightening the spinner and prop, not using a prop that has hit the ground, and keeping foreign objects away from the propeller.

The TDA7541 is a high performance tuner circuit with stereo decoder for AM/FM car radio. It contains a mixer, IF amplifier, demodulator for AM and FM, stereo decoder, quality detection, ISS filter and PLL synthesizer with IF counter on a single chip.

This document is the operator's manual for BT-50EI. It provides specifications, features, and safety tips for the product.

The BT-43EIS is a 43cc [2.6ci] displacement engine manufactured by FUJI-IMVAC INC. It has a horsepower of 4.2 hp / 11,000 rpm and features electronic ignition. The engine weighs approximately 1820g and runs on a mixture of gas and 2-cycle engine oil.

The document provides safety tips and warnings for the BT-34EIS engine manufactured by FUJI-IMVAC. It offers recommendations for using a balanced spinner and prop, and warns against using an unbalanced spinner and prop combination, as it may cause vibration and propeller shaft breakage. Additionally, the importance of using a lightweight spinner is emphasized, and advice is given on using props, such as not using props that have hit the ground and avoiding foreign objects being sucked into the propeller. Furthermore, the document reminds users to keep onlookers away from the running engine and warns against attempting to stop the engine by throwing objects into the path of the propeller.

This is an operator's manual that introduces the features and usage methods of the BT-34B engine.

Operator’s Manual for BT-32EIS. It contains specifications, usage and safety tips.

OP215 is a dual precision JFET-input operational amplifier produced by Analog Devices. It features high speed, low input bias current, wide bandwidth and high common-mode rejection ratio.

This document is the operator's manual for the BT-32B produced by FUJI-IMVAC INC. The product is a gas/2-cycle engine with a displacement of 1.95 cu in [34cc] and 2.2 horsepower at 10,000 rpm. The manual provides safety tips and warnings, including the use of balanced spinner and lightweight spinner.

Operator's Manual for BT-32A and BT-50S-A, which introduces the specifications, performance, and pre-operation precautions of the product.

This document provides safety tips and warnings for the BT-28M engine manufactured by FUJI-IMVAC INC., including using a balanced prop, keeping the driveshaft lubricated, avoiding foreign objects, protecting onlookers, securing the fuel line, etc.

The BT-24M is a gas/2-cycle engine with a displacement of 1.45 cu in, horsepower of 3.0hp, and an ignition style of spring-assisted recoil starter. It has an RPM range of 4000-12000 and is manufactured by FUJI-IMVAC INC. It weighs 3.13 lbs and comes with safety tips and warnings.

This is a manual for the BT-24 airplane engine. It includes parameters such as engine model, power, speed, and weight.