Industrial

STPS640C is a power Schottky rectifier from ST company. Its main features are small conduction losses, negligible switching losses, extremely fast switching, low forward drop voltage, low capacitance, and low thermal resistance. This device is intended for use in low and medium voltage operation, and particulary, in high frequency circuitries where low switching losses are required (free wheeling and polarity protection).

STPS1545C is a dual center tap Schottky rectifier from STMicroelectronics that is suitable for switch mode power supply and high frequency DC to DC converters. It is packaged in TO-220AB, D2PAK, I2PAK, or DPAK and is specifically intended for use in low voltage, high frequency inverters, free wheeling and polarity protection applications.

The document describes a high voltage power Schottky rectifier suitable for high frequency switch mode power supply. It has high junction temperature capability, low leakage current, good trade-off between leakage current and forward voltage drop, low thermal resistance, and high frequency operation.

The AN8001FHK is a 64-gradation LCD grading voltage generation IC with a high-precision reference voltage source (1.23V), a wide dynamic range of buffer amplifiers, and a large COM-amplifier drive current (±100 mA (max.)).

STPS61150CW is a high voltage power Schottky rectifier from ST. It has a rated reverse voltage of 150V and a rated forward current of 30A. This diode features high junction temperature capability, low leakage current, low thermal resistance, etc. It is suitable for high frequency switch mode power supply applications.

The AN8000MS is a ripple filter IC that rejects the ripple component superimposed on the regulator output. Use for the VCO bias of cellular phones improves C/N and S/N and makes high-quality telephone communication possible. Furthermore, by decreasing the difference between I/O voltages, drop in the power supply voltage of VCO is reduced.

This document describes the features and characteristics of the STPS3060CW high voltage dual Schottky rectifier, suitable for switchmode power supplies and other power converters. It has negligible switching losses, low forward voltage drop, low capacitance, and high reverse avalanche surge capability.

AN8000MS is a ripple filter IC used for the VCO bias of cellular phones, which improves C/N and S/N and makes high-quality telephone communication possible. Furthermore, by decreasing the difference between I/O voltages, drop in the power supply voltage of VCO is reduced.

The TURBOSWITCH “H” is an ultra high performance diode composed of two 300V dice in series. TURBOSWITCH “H” family drastically cuts losses in the associated MOSFET when run at high dIF/dt. Especially suited as boost diode in continuous mode power factor correctors and hard switching conditions. Designed for high dIF/dt operation. Hyperfast recovery current to compete with SiC devices. Allows downsizing of MOSFET and heatsinks. Internal ceramic insulated devices with equal thermal conditions for both 300V diodes. Insulation (2500VRMS) allows placement on same heatsink as MOSFET. Flexible heatsinking on common or separate heatsink. Static and dynamic equilibrium of internal diodes are warranted by design. Package Capacitance: C=7pF

STTH806DTI is a 600V dual in-line power diode from ST. It has very fast switching speed, faster than SiC devices, and can be used in PFC circuits.

The AN8000 series is a 3-pin low-dropout fixed positive output monolithic voltage regulator. Since thier power consumption can be minimized, they are suitable for bat- tery stabilizing power supply and reference voltage. Thir- teen types of output voltage are available ; 2V, 2.5V, 3V, 3.5V (TO-92 only) , 4V, 4.5V, 5V, 6V, 7V, 8V, 8.5V, 9V, and 10V.

The TURBOSWITCH “H” is an ultra high performance diode composed of two 300V dice in series. TURBOSWITCH “H” family drastically cuts losses in the associated MOSFET when run at high dIF/dt. It is especially suited as a boost diode in continuous mode power factor correctors and hard switching conditions. It is designed for high DI/DT operation and has hyperfast recovery current to compete with SIC devices, allowing downsizing of MOSFET and heatsinks. The internal ceramic insulated devices have equal thermal conditions for both 300V diodes. The insulation (2500VRMS) allows placement on the same heatsink as MOSFET and flexible heatsinking on common or separate heatsinks. The static and dynamic equilibrium of internal diodes are warranted by design. Package capacitance: C=16pF

STTH3006DPI is a 600V hyperfast recovery diode that is especially suited as a boost diode in continuous mode power factor correctors and hard switching conditions. The device is designed for high dIF/dt operation and features a hyperfast recovery current to compete with SiC devices. This allows downsizing of MOSFETs and heatsinks.

The STPS3150 is a 150V power Schottky rectifier from STMicroelectronics. It is suitable for switch mode power supplies and high frequency converters. It features low conduction losses, low forward voltage drop, and low thermal resistance.

STPS2150 is a power Schottky rectifier from ST. It features negligible switching losses, low forward voltage drop, low thermal resistance, and small package. It is suitable for switch mode power supplies, consumer electronic products and computer applications.