Industrial

MCR10 is a thick film rectangular resistor produced by ROHM. It has a power rating of 1/8W, a resistance of 10≤R≤2.2M, a precision of ±1%, a rated current of 2A, and an operating temperature range of -55°C to +155°C.

MCR10 (2012 size: 1 / 8W) is a chip resistor produced by ROHM. It uses thick film technology and has an rated power of 1 / 8W. It is highly reliable and has good resistance to corrosion. It can be widely used in various circuits.

The TC211 is a full-frame charge-coupled device (CCD) image sensor designed specifically for industrial applications requiring ruggedness and small size.

The TL1591 is a monolithic integrated sample-and-hold circuit that uses the BiFET process with Schottky-barrier diodes and is designed for use with CCD area imagers. This device consists of an ultra-fast input-buffer amplifier, a digital-controlled diode-bridge switch, and a high-impedance output buffer amplifier. The electronic switch is controlled by an LS-TTL-compatible logic input.

The TL1466I is a six-channel pulse-width-modulation (PWM) control circuit. This device contains reference voltage with a precision of ±2%, a triangle wave oscillator capable of high frequency oscillation up to 0.8 MHz, various protection circuitry and shutdown circuitry. The output regulation voltage for each channel is set by an external resistor divider. Moreover, the output stage is capable of driving a PNP power transistor with high speed. The high frequency/efficiency switching operation eliminates switching loss by using internal over-drive circuitry at the rising edge and with reverse bias connecting external bootstrap capacitor at the falling edge. The MOSFET can be used in parallel with the output diode at channel 1 and 4. This results in further high efficiency operation replacing the constant time with this MOSFET when the output diode is turned on. Furthermore, it operates 2.5 V supply voltage and also has short circuit protection, low power consumption, internal undervoltage lockout protection etc.

TL1464I is a high-speed drive controller for PNP power transistors. It features an internal 1.5V regulator, a low start-up voltage of 3.1V, internal short-circuit protection, internal undervoltage lockout protection, internal shut-down circuit by channel, and controllable base current of external transistor.

The TL145406 is a triple RS-232 driver/receiver that meets or exceeds the requirements of ANSI EIA/TIA-232-E and ITU V.28, designed to support data rates up to 120 kbits/s over 3-m cable, ESD protection exceeds 5 kV on all pins, flow-through design, wide-driver supply voltage ... ±4.5 V to ±15 V, functionally interchangeable with Motorola MC145406 and Texas Instruments SN75C1406

The TL1454/TL1454Y are dual-channel pulse-width-modulation (PWM) control circuits, primarily intended for low-power dc/dc converters. Applications include LCD displays, backlight inverters, notebook computers and other products requiring small, high-frequency dc/dc converters. Each PWM channel has its own error amplifier, PWM comparator, dead-time control comparator, and MOSFET driver. The voltage reference, oscillator, undervoltage lockout and short-circuit protection are common to both channels. Channel 1 is configured to drive n-channel MOSFETs in step-up or flyback converters, and channel 2 is configured to drive p-channel MOSFETs in step-down or inverting converters. The operating frequency is set with an external resistor and an external capacitor, and dead time is continuously adjustable from 0 to 100% duty cycle with a resistive divider network. Soft start can be implemented by adding a capacitor to the dead-time control (DTC) network. The error-amplifier common-mode input range includes ground, therefore this circuit can be used in low-voltage applications.

TL1453C is a dual pulse-width-modulation control circuit with complete PWM power control circuitry, completely synchronized operation, internal undervoltage lockout protection, wide supply voltage range, 500 kHz oscillator frequency, variable dead time control, and internal stable 2.5V reference supply.

tl1451a is an integrated circuit produced by texas instruments. It is mainly used for power supply control and supports pwm control circuits.

This document is the datasheet of TL1451A. It provides detailed information about the features and characteristics of TL1451A, including internal structure, working principle and application scenarios.

The UTC TL1451 is a single monolithic chip that includes two pulse-width-modulation (PWM) control circuits. It is designed primarily for power supply control.

The TL1431 is a programmable shunt voltage reference with guaranteed temperature stability over the entire temperature range of operation. The output voltage may be set to any value between Vref (approximately 2.5V) and 36V with two external resistors. The TL1431 operates with a wide current range from 1 to 100mA with a typical dynamic impedance of 0.2Ω.

TL1431 is a precision programmable reference voltage source produced by Texas Instruments. It has high precision, low output impedance, fast response speed, low reference current and adjustable output voltage, which is suitable for applications such as onboard regulation, adjustable power supplies and switching power supplies in automotive, commercial and military temperature ranges.