STMicroelectronics Manuals

LM111, LM211, LM311 are voltage comparators with low input currents. They are designed to operate over a wide range of supply voltages. Their output is compatible with RTL-DTL and TTL as well as MOS circuits and can switch voltages up to +50V at output currents as high as 50mA.

The TSH341 is a single supply operational amplifier featuring a large bandwidth of 300MHz at unity gain for only 9.8mA of quiescent current.

The VNQ860 and VNQ860SP are monolithic devices made using STMicroelectronics VIPower M0-3 Technology, intended for driving any kind load with one side connected to ground. Active current limitation combined with thermal shutdown and automatic restart protect the device against overload. Device automatically turns off in case of ground pin disconnection. This device is especially suitable for industrial applications in norms conformity with IEC1131 (Programmable Controllers International Standard).

STPS2545CT/CG/CFP is a 2A power Schottky rectifier produced by ST company. Its main features are small conduction loss, negligible switching loss, extremely fast switching, low thermal resistance, and avalanche capability. This device is especially intended for use in low voltage, high frequency inverters, free wheeling and polarity protection applications.

This document describes the features and characteristics of STMicroelectronis STD17NF03L and STD17NF03L-1 N-channel power MOSFETs, including exceptional dv/dt capability, low gate charge at 100°C, application oriented characterization, and 100% avalanche tested. The product is suitable for switching applications.

The TS914 is a low-power, high-performance, low-voltage, high-precision, high-gain single-supply or dual-supply operational amplifier from TI.

The ST202E/ST232E are a 2 driver 2 receiver devices designed for RS-232 and V.28 communications in harsh environments. Each transmitter output and receiver input is protected against ± 15 kV electrostatic discharge (ESD) shocks. The drivers meet all EIA/TIA-232E and CCITT V.28 specifications at data rates up to 230 kbps, when loaded in accordance with the EIA/TIA-232E specification. The ST202E/232E use a single 5 V supply voltage. The ST232E operates with four 1 µF capacitors, while the ST202E operates with four 0.1 µF capacitors, further reducing cost and board space.

STPS2030CT/CG/CR is a 3A low voltage diode produced by ST. It is suitable for switch mode power supply and high frequency DC to DC converter. This device is packaged in TO-220AB, D2PAK and I2PAK, and is intended for use in low voltage high frequency inverters, free wheeling and polarity protection applications.

st6215c/st6225c 8-bit mcu with a/d converter, two timers, oscillator safeguard & safe reset

This is a dual center tap Schottky rectifier suitable for high frequency switch mode power supply. It features high junction temperature capability, low leakage current, good trade off between leakage current and forward voltage drop, low thermal resistance and high frequency operation.

This document is about the STM690A/692A/703/704/802/805/817/818/819 5V Supervisor with Battery Switchover product manual.

ST6208C/ST6209C ST6210C/ST6220C 8-BIT MCUs WITH A/D CONVERTER, TWO TIMERS, OSCILLATOR SAFEGUARD & SAFE RESET

This document introduces a high-performance power MOSFET product designed by STMicroelectronics, which has high operating voltage and low resistance characteristics, suitable for switching applications.

TS507 is a high precision rail-to-rail operational amplifier with features including ultra low offset voltage, rail-to-rail input/output voltage swing, operating voltage range from 2.7V to 5.5V, high speed of 1.9MHz, low power consumption of 0.8mA, very large signal voltage gain of 131dB, high power supply rejection ratio of 105dB, 5kV ESD protection, latch-up immunity, etc. It is suitable for battery-powered applications, portable devices, signal conditioning, and medical instrumentation.

This document describes the features and characteristics of the STD2N50 N-channel enhancement mode power MOS transistor, including typical on-resistance, voltage rating, current rating, and avalanche test data. The product is suitable for high current, high-speed switching, switch mode power supplies (SMPS), chopper regulators, converters, motor control, and lighting applications for industrial and consumer environments.