HRS manuals, page 3
HRS 2mm Pitch Miniature Connector A3 A4 Series
C10 2mm Pitch Miniature Connector A3 • A4 Series is a connector made by Hioki that features a small, lightweight design and high-density mounting. The connector supports DIP, SMT, and crimp types, and can be stacked as needed.
HRS 2.54mm Pitch High Density Connector A1 A2 Series
C2 2.54mm Pitch High Density Connector A1 and A2 Series is a high density connector from Fuji. It features connectors aligned in the longitudinal direction on the 2.54 mm mesh board, so that no idle space can occur. The A1 series contains 16 types of 6 to 64 contacts, while the A2 series contains 20 types of 1 to 20 contacts. The A1 series is compatible with HIF3B series cable side and HIF3H receptacle for wide applications.
HRS Card Edge Type Ribbon Cable Connector HIF5 Series
The B55 Card Edge Type Ribbon Cable Connector HIF5 Series is a connector with the following features: 1. Product Variation: The area to install the connector body is classified into three types according to full hole mounting area, semi-mounting area and non-mounting area. 2. Mounting Density Enhancement: This connector is designed so that the ribbon cable can turn back within the connector molding range. The connector can be installed without coming out of the insulator. 3. Applicable Cable: The applicable cable is a <UL2651>AWG#28 flat cable (7 pcs./0.127mm, jacket dia.: 0.8~1.0mm). It has characteristics such as voltage resistance, humidity resistance, and vibration resistance.
HRS MU-PJ Type Optical Fixed Attenuators handbook
This document describes the features and characteristics of MU SC FC harsh environment attenuators and terminators, including user-friendly push-pull mechanism, guaranteed attenuation over a wide bandwidth, selectable attenuation levels, and maximum input power.
HRS 2.54mm Pitch Miniature Connector for Flexible Board FH1 Series
This is a PDF document about D2 2.54mm Pitch Miniature Connector for Flexible Board FH1 Series. The connector has a contact pitch of 2.54mm and ensures high contact reliability for high voltage contact. It is available in 18 different contact numbers. The product specifications include rated current, operating temperature range, rated voltage, etc. It is suitable for applications such as HDD, facsimiles, printers, VTR, etc.
HRS DF14 Series 1.25mm Pitch Super Low profile Crimping Connector Data Sheet
DF14 Series is a right angle connector that pursues a very low profile on the board. The board mounting height is 2.5mm and it can fetch a signal from an area with no board to board space.
HRS GT3 Series GT3 GT3B GT3TK GT3TKW
The GT3 series is a connector launched by TE. It has low-profile and standard types.
HRS GT10 Series Data sheet
The GT10 series is a miniature ECU interface connector that is smaller than existing 040 connectors. It features a front retainer design that prevents incomplete insertion and provides multiple connector options to meet different application needs.
HRS 1.27mm Pitch Multi-function Two Piece Connector FX2 Series
This document describes the features and characteristics of the A142 1.27mm Pitch Multi-function Two Piece Connector FX2 Series.
HRS PCN11 series product compliant with DIN standard
PCN11 series socket connector is a high reliability socket connector developed and manufactured by Siemens. The product complies with IEC603-2/DIN41612 standard and has 10, 16, 20, 32, 44, 50, 64, 90, 96, 100 and 128 contact options. Moreover, it adopts a reliable double-sided 2-point contact pin structure and is suitable for a wiring board with a thickness of 2.54mm or more.
HRS PCN10F series product compliant with DIN standard
A71 is a pluggable type of connector with shielding layer and complies with DIN 41612 standard. It has high reliability, various contact methods, wide applications and high frequency characteristics.
HRS MS type Lower Profile Plug H/MS Series
MS type Lower Profile Plug H/MS Series is a new product of H/MS Series connector. It has 20% height reduction, 360° cable exit direction, simple assembly, water and dust proof, IP67, etc. It can be used in factory automation equipment, robotic equipment, servo motors and other applications.
HRS (HIROSE) Bedienungsanleitung Operating instructions Handcrimpzange für geschirmte modulare Steckverbinder der Serie TM 11 und TM 21 im Kunststoffkoffer
HRS 7.92 mm Contact Pitch High-Current Connectors for Internal Power Supplies (UL C-UL TÜV Listed) DF22 Series
DF22 series high-current connectors are designed for internal power supplies. The maximum current is 30 A. The connectors have a complete locking function, preventing incorrect connections. They have molded-in contact retention tabs and built-in posts, preventing incorrect board placement. The connectors can be encapsulated up to 10 mm without affecting the performance.
HRS Ribbon Cable connector Compliant with MIL Standard HIF3B Series
The B15 Ribbon Cable connector is compliant with MIL Standard HIF3B series and features a mechanism to prevent mis-insertion. It is UL approved and suitable for use with AWG#28 cables.