STMicroelectronics Manuals

This document introduces the features of the L6219 stepper motor driver, including the output current, working voltage, working mode, etc.

L6201 L6202 - L6203 DMOS full bridge driver, provide up to 48V supply voltage, 5A max peak current (2A max. for L6201), max total RMS current for L6201: 1A; L6202: 1.5A; L6203/L6201PS: 4A RDS(ON) 0.3 Ω (typical value at 25°C) cross conduction protection TTL compatible drive operating frequency up to 100 KHz thermal shutdown internal logic supply high efficiency

L297 Stepper Motor Controller, can drive two-phase bipolar and four-phase unipolar stepper motors

L293B and L293E are quad push-pull drivers capable of delivering output currents to 1A per channel

The L6234 is a triple half bridge to drive a brushless DC motor. It operates with a supply voltage from 7 to 52V, has a peak current of 5A, typ. RDSon value of 0.3Ω at 25°C, cross conduction protection, TTL compatible driver, operating frequency up to 150kHz, thermal shutdown, intrinsic fast free wheeling diodes, input and enable function for each half bridge, and a 10V external reference.

STM8S003K3 STM8S003F3 is a low-end product in the STM8S series, with a 16 MHz advanced STM8 core, Harvard architecture and 3-stage pipeline, and an 8KB Flash ROM, 128-byte data EEPROM, 10-bit ADC, 3 timers, UART, SPI, I²C interfaces.

STM32W108C8 is a high-performance IEEE 802.15.4 wireless SoC system with 64KB flash memory. It features a 32-bit ARM Cortex-M3 processor, a 2.4 GHz IEEE 802.15.4 transceiver, and lower MAC capabilities. The chip also has flexible ADC, SPI/UART/I2C serial communications, and general-purpose timers.

STM8L151C2/K2/G2/F2/C3/K3/G3/F3 is ST's 8-bit ultra-low power MCU with 8KB Flash, 256B data EEPROM, RTC, timers, USART, I2C, SPI, ADC, comparators, etc.

This document provides detailed information on a DiSEqC™ slave microcontroller for SaTCR based LNBs and switchers, including features such as clock, reset and supply management, communication interfaces, and output pins.

This document is a production data manual for STM32L151xD and STM32L152xD, which mainly introduces the characteristics of the product, including operating voltage range, low power mode, core, reset and supply management, clock management, storage, low power calendar and so on.

STM32F415xx/STM32F417xx are STM32F4 series microcontrollers based on ARM Cortex-M4 core with maximum frequency up to 168MHz, supporting FPU and DSP instructions, with 1MB Flash and 192+4KB SRAM, supporting USB OTG HS/FS, Ethernet, 17 timers, 3 ADCs, 15 communication interfaces and cameras.

The STM32F405xx and STM32F407xx are ARM Cortex-M4 32-bit MCUs with FPU, offering 210DMIPS, up to 1MB Flash/192+4KB RAM, USB OTG HS/FS, Ethernet, 17 TIMs, 3 ADCs, 15 communication interfaces, and camera support. This document provides an overview of the core features and characteristics of the product.

STM8S007C8 is a 24MHz STM8S 8-bit MCU with 64Kbytes Flash, true data EEPROM, 10-bit ADC, timers, 2 UARTs, SPI, I²C and other functions.

STM8S005K6 and STM8S005C6 are 16 MHz STM8S 8-bit MCUs with 32 Kbytes Flash, data EEPROM, 10-bit ADC, timers, UART, SPI, and I²C. The product line features medium-density Flash/EEPROM with 32 Kbytes of Flash memory and 128 bytes of true data EEPROM. It also includes 2 Kbytes of RAM, a 2.95 V to 5.5 V operating voltage range, flexible clock control, and various communication interfaces.