Maxim manuals, page 70
MAXIM MAX9526 Low-Power High-Performance NTSC/PAL Video Decoder handbook
The MAX9526 is a low-power video decoder that converts NTSC or PAL composite video signals to 8-bit or 10-bit YCbCr component video compliant with the ITU-R BT.656 standard. The device powers up in fully operational mode and automatically configures itself to decode the detected input standard. The MAX9526 typically consumes 200mW of power in normal operation and typically less than 100µW in shutdown mode. An internal 10-bit, 54MHz analog-to-digital converter (ADC) samples the input with four times oversampling. The MAX9526 features a DC restoration circuit with offset correction and automatic gain control to accurately optimize the full-scale range of the ADC. An integrated analog anti-aliasing filter eliminates the need for external filtering. The MAX9526 includes a 2:1 input multiplexer with automatic signal selection based on activity at the inputs. An internal line-locked phase-locked loop (PLL) generates the sample clock and the line-locked clock (LLC) output to provide an ITU-compliant output. Alternatively, the PLL can be configured to provide a sample clock and output clock at 2x and 1x the frequency of the crystal oscillator, respectively. The MAX9526 provides a multiline adaptive comb filter to reduce cross-chrominance and cross-luminance artifacts. A single 1.8V supply is used for both the digital and analog supplies. The digital outputs operate from a separate +1.7V to +3.45V supply to allow direct connection to a wide range of devices.
MAXIM MAX3814 DVI/HDMI TMDS FR-4 Cable Equalizer/Driver handbook
MAX3814 is a TMDS output device launched by TI company, which has the characteristics of FR-4 board microstrip and cable HF loss compensation, variable output current, selectable partial return termination and 4 channels.
MAXIM MAX3816A handbook
The MAX3816A DDC/I2C extender is designed to compensate for excessive load capacitance of long DVI, HDMI, and VGA cables. It restores signal integrity bidirectionally for both DDC clock and data over cable distances up to 60 meters. The MAX3816A features compensation for cable capacitance up to 3000pF, typically exceeding 5000pF. It detects state-change assertion by the logical 'AND' of the source side and display side, and asserts the new state with a rail-to-rail slew-rate-limited driver capable of meeting I2C rise and fall time requirements. A holdoff period of 2.5µs prevents subsequent state changes while the cable channel settles. The MAX3816A consumes 25mW under full load at 100kbps (excluding pullup resistors) and is available in a 16-pin TSSOP package. It operates from 0°C to +70°C.
MAXIM MAX3815A handbook
MAX3815A is a HDMI/DVI digital video equalizer from Maxim that automatically compensates for DVI™ and HDMI™ v1.3 cables, extending the usable cable distance up to 40 meters (1.65Gbps) and 35 meters (2.25Gbps).
MAXIM MAX7474 handbook
MAX7474 is a video equalizer chip designed and manufactured by TI. It has automatic equalization, low frequency and chrominance band loss compensation and other characteristics. It is mainly used in security video systems, video switching systems and home automation.
MAXIM MAX7450/MAX7451/MAX7452 Video-Signal Conditioners with AGC Back-Porch Clamp handbook
The MAX7450/MAX7451/MAX7452 complete front-end video-signal conditioners are designed to improve the quality of standard-definition video signals.
MAXIM MAX7428/MAX7430/MAX7432A handbook
The MAX7428/MAX7430/MAX7432A filters are low-cost, high-performance replacements for standard discrete filter and buffer solutions. They are ideal for anti-aliasing and DAC smoothing video applications, when analog video is reconstructed from a digital data stream. These devices require a single +5V supply and the filters have a cutoff frequency optimized for NTSC, PAL, and standard definition digital TV (SDTV) video signals. The MAX7428/MAX7430/MAX7432A feature Maxim’s single-pin bus (MSPB™) interface to digitally control channel selection (IN_A or IN_B), adjust high-frequency boost, bypass the filter, configure luma vs. chroma operation, and control the output disable. The MAX7428 single-channel filter is ideal for composite (CVBS) video signals. The MAX7430 dual filter is optimized for S-Video (Y/C) applications. The MAX7432A triple filter is optimized for component (YPbPr or embedded synchronous RGB) video signals. The MAX7428 is available in a tiny 8-pin SOT23 package, the MAX7430 is available in a miniature 10-pin µMAX® package, and the MAX7432A is available in a 14-pin TSSOP package. The MAX7428/MAX7430/MAX7432A are fully specified over the -40°C to +85°C extended temperature range.
MAXIM MAX7440/MAX7441/MAX7442 handbook(1)
MAX7440/MAX7441/MAX7442 6-Channel Integrated Video Reconstruction Filters
MAXIM MAX9502 handbook
The MAX9502 is a small, low-power video amplifier with integrated reconstruction filter that operates from a supply voltage as low as 2.5V.
MAXIM MAX4079 Complete Audio/Video Backend Solution handbook
The MAX4079 filters and buffers video (NTSC/PAL/DVB) and stereo audio signals from the MPEG decoder of a cable/satellite receiver, VCR/DVD player, or a TV to an external load
MAXIM MAX7462/MAX7463 Single-Channel Video Reconstruction Filters Buffers handbook
MAX7462/MAX7463 are single-channel, standard-definition, integrated video reconstruction filters and buffers that are ideal for anti-aliasing and digital-to-analog smoothing video applications or wherever analog video is reconstructed from digital data (such as cable/satellite/terrestrial set-top boxes and DVRs).
MAXIM MAX9500/MAX9501 handbook
MAX9500/MAX9501 are integrated circuits for filtering and buffering HDTV signals
MAXIM MAX9508 handbook
The MAX9508 video filter amplifier with SmartSleep and bidirectional video support is ideal for set-top boxes (STBs), portable DVD players, and portable media players (PMPs). The inputs can be directly connected to the digital-to-analog converter (DAC) outputs. The reconstruction filter removes high-frequency signals above 6.75MHz. The amplifiers have 6dB of gain, and the outputs can be DC-coupled to a load of 75Ω, which is equivalent to two video loads, or it can be AC-coupled to a load of 150Ω. The SmartSleep circuitry intelligently reduces power consumption based on the presence of the input signal and the output loads. When the MAX9508 does not detect the presence of sync on the input video signal, the supply current is reduced to less than 7µA. The device only enables a video amplifier when there is an active video input signal and an attached load. The video amplifier remains on while a load is connected. If the load is disconnected, the video amplifier is turned off. The MAX9508 contains three reconstruction filters, four video amplifiers, and a pulldown switch at one of the two CVBS outputs. The MAX9508 has the ability to control the bidirectional video signals at the CVBS video connections without the need for separate switches or relays. This feature is particularly useful for portable DVD players, which often use the same connector to drive a composite video output and to accept an external video signal to display on the LCD panel.
MAXIM MAX7457 handbook
The MAX7457 4-channel video switch is ideal for anti-aliasing and DAC-smoothing video applications or wherever analog video is reconstructed from a digital data stream such as cable/satellite/terrestrial set-top boxes (STBs), DVD players, hard disk recorders (HDRs), and personal video recorders (PVRs). The MAX7457 filters and buffers CVBS and RGB video signals, making it ideal for dual SCART (peritelevision) STBs with an auxiliary CVBS input. The MAX7457 operates from a single +5V supply and has a flat passband out to 5MHz with a stopband attenuation of 43dB at 27MHz, making it ideal for NTSC, PAL, and standard-definition digital TV (SDTV) video systems. The MAX7457 output buffers have a fixed gain of +6dB and are capable of driving two standard 150Ω video loads. The channel for CVBS video has high-frequency boost circuitry that enhances picture sharpness with up to +1.2dB of gain boost without degradation in the stopband. The video output drivers can be disabled by an external control input. The MAX7457 is available in a 16-pin, 5mm x 5mm x 0.8mm TQFN package, and is specified over the extended (-40°C to +85°C) temperature range.
MAXIM MAX9507 handbook
The MAX9507 amplifies and filters standard-definition video signals with low power consumption, video load detection, and internal negative power supply.