Maxim manuals, page 68
MAXIM MAX6581 Manual
The MAX6581 is a precision multichannel temperature sensor that monitors its own temperature and the temperatures of up to seven external diode-connected transistors. All temperature channels have programmable alert and overtemperature thresholds. The MAX6581 features high accuracy, low power consumption, and a flexible interface.
MAXIM MAX31722/MAX31723 Manual
MAXIM MAX31855 handbook
The MAX31855 is a cold-junction compensated thermocouple-to-digital converter from Maxim Integrated Products. It supports K, J, N, T, S, R, and E type thermocouples. The converter has a 14-bit, 0.25NC resolution SPI-compatible read-only interface. It can measure temperatures from -270NC to +1800NC with an accuracy of ±2NC for K-type thermocouples. The MAX31855 is suitable for use in industrial, home appliance, and automotive applications.
MAXIM MAX31826 handbook
The MAX31826 is a 1-Wire digital temperature sensor with 128 bytes of EEPROM storage. The EEPROM can be locked to prevent further data writes. The device has a 64-bit serial code, allowing it to be used on the same 1-Wire bus as other devices.
MAXIM MAX3221/MAX3223/MAX3243* Manual
The MAX3221/MAX3223/MAX3243 are 3V-powered EIA/TIA-232 and V.28/V.24 communications interfaces intended for notebook computer applications.
MAXIM MAX3453E MAX3456E ±15kV ESD-Protected USB Transceivers handbook
The MAX3453E-MAX3456E ±15kV ESD-protected USB-compliant transceivers interface low-voltage ASICs with USB devices. The devices fully comply with USB 1.1 and USB 2.0 when operating at full (12Mbps) and low (1.5Mbps) speeds.
MAXIM MAX7456 Single-Channel Monochrome On-Screen Display with Integrated EEPROM handbook
MAX7456 is a single channel monochrome OSD generator from MAXIM company, which has 256 user programmable characters and can be used in many application scenarios, such as security switching system, security camera, industrial application, in-cabin entertainment and so on
MAXIM MAX4359/MAX4360/MAX4456 Low-Cost 4x4 8x4 8x8 Video Crosspoint Switches handbook
MAX4359/MAX4360/MAX4456 is a low-cost video crosspoint switch that can connect four (MAX4359) or eight (MAX4360/MAX4456) video inputs to any buffered output, with three-state output capability and internal programmable active loads, it is feasible to parallel multiple devices to form larger switch arrays.
MAXIM MAX4356 16x 16 Nonblocking Video Crosspoint Switch with On-Screen Display Insertion I/O Buffers handbook
The MAX4356 is a 16✕16 highly integrated video crosspoint switch matrix with input and output buffers and On-Screen Display (OSD) Insertion. This device operates from dual ±3V to ±5V supplies or from a single +5V supply. Digital logic is supplied from an independent single +2.7V to +5.5V supply. Individual outputs can be switched between an input video signal source and OSD information through an internal, dedicated fast 2:1 mux (40ns switching times) located before the output buffer. All inputs and outputs are buffered, with all outputs able to drive standard 75Ω reverse-terminated video loads. The switch matrix configuration and output buffer gain are programmed via an SPI/QSPI™-compatible, three-wire serial interface and initialized with a single update signal. The unique serial interface operates in two modes facilitating both fast updates and initialization. On power-up, all outputs are initialized in the disabled state to avoid output conflicts in large-array configurations. Superior flexibility, high integration, and space-saving packaging make this nonblocking switch matrix ideal for routing video signals in security and video-on-demand systems. The MAX4356 is available in a 128-pin TQFP package and specified over an extended -40°C to 85°C temperature range.
MAXIM MAX4357 32 x 16 Nonblocking Video Crosspoint Switch with I/O Buffers handbook
The MAX4357 is a highly integrated 32×16 video crosspoint switch matrix with input and output buffers. This device operates from dual ±3V to ±5V supplies or from a single +5V supply. Digital logic is supplied from an independent single +2.7V to +5.5V supply. All inputs and outputs are buffered, with all outputs able to drive standard 75Ω reverse-terminated video loads. The switch matrix configuration and output buffer gain are programmed through an SPI™/QSPI™-compatible, 3-wire serial interface and initialized with a single update signal. The unique serial interface operates in two modes facilitating both fast updates and initializa- tion. On power-up, all outputs are initialized in the dis- abled state to avoid output conflicts in large-array configurations. Superior flexibility, high integration, and space-saving packaging make this nonblocking switch matrix ideal for routing video signals in security and video-on- demand systems. The MAX4357 is available in a 128-pin TQFP package and specified over an extended -40°C to +85°C tem- perature range. Applications Security Systems Video Routing Video-On-Demand Systems Features o 32×16 Nonblocking Matrix with Buffered Inputs and Outputs o Operates from ±3V, ±5V, or +5V Supplies o Each Output Individually Addressable o Individually Programmable Output Buffer Gain (AV = +1V/V or +2V/V) o High-Impedance Output Disable for Wired-OR Connections o 0.1dB Gain Flatness to 12MHz o Minimum -62dB Crosstalk, -110dB Is
MAXIM MAX9675 110MHz 16 x 16 Video Crosspoint Switch with Programmable Gain handbook
The MAX9675 is a nonblocking 16 x 16 video cross-point switch with buffered inputs and outputs from Maxim Integrated Products. The device operates on ±5V analog supplies. Digital logic is supplied separately from an independent +2.7V to +5V supply. The MAX9675 inputs and outputs are buffered with all outputs able to drive a standard 75Ω reverse-terminated video load. The switching matrix and programmable gain are controlled through an SPI™/QSPI™-compatible 3-wire serial interface. The serial interface is designed to operate in either of two modes to provide fast updates and initialization. All outputs are held in the disabled state during power-up to avoid signal conflicts in large switching arrays. The programmability and high level of integration make the MAX9675 an ideal choice for nonblocking video switch applications.
MAXIM MG3500/MG2580 HD H.264 CODEC Advance Information handbook
MG3500/MG2580 HD H.264 CODEC is a high-definition video encoder/decoder that uses Maxim's advanced video compression technology to efficiently compress video and decode it with low latency.
MAXIM MAX7461 handbook
The MAX7461 is a single-channel loss-of-sync alarm (LOS) that provides composite video sync detection in NTSC, PAL, and SECAM standard-definition television (SDTV) systems. MAX7461's advanced detection circuitry delivers robust performance by preventing false loss-of-sync alarms due to noise. The device accepts an AC-coupled composite (CVBS), luma (Y), or any other video signal with sync, and outputs a logic-level signal. The open-drain LOS output is low when no sync is detected and high impedance when sync is detected. The device operates from a single +5V supply. The MAX7461 is available in a 5-pin SOT23 package and is specified for operation over the -40°C to +85°C temperature range.
MAXIM MAX4588 Low-Voltage High-Isolation Dual 4-Channel RF/Video Multiplexer handbook
The MAX4588 low-voltage, dual 4-channel multiplexer is designed for RF and video signal processing at frequencies up to 180MHz in 50Ω and 75Ω systems.
MAXIM MAX4565/MAX4566/MAX4567 handbook
The MAX4565/MAX4566/MAX4567 are low-voltage T-switches designed for switching RF and video signals from DC to 350MHz in 50Ω and 75Ω systems.