Maxim manuals, page 69
MAXIM MAX4589 handbook
The MAX4589 is a low-voltage, dual 2-channel multiplexer designed for RF and video signal processing at frequencies up to 200MHz in 50Ω and 75Ω systems. It features low insertion loss, high off-isolation, low crosstalk, etc.
MAXIM MAX4550/MAX4570 Serially Controlled Dual 4x2 Clickless Audio/Video Analog Crosspoint Switches handbook
The MAX4550/MAX4570 series serial-interface, programmable, dual 4x2 audio/video crosspoint switches are ideal for multimedia applications.
MAXIM MAX4545/MAX4546/MAX4547 handbook
The MAX4545/MAX4546/MAX4547 are low-voltage T-switches designed for switching RF and video signals from DC to 300MHz in 50Ω and 75Ω systems. They have excellent high-frequency off isolation and crosstalk performance, and can handle Rail-to-Rail® analog signals in either direction. The on-resistance is well matched and flat over the specified signal range, using ±5V supplies. They can operate with dual power supplies ranging from ±2.7V to ±6V or a single supply between +2.7V and +12V. All digital inputs have 0.8V/2.4V logic thresholds, ensuring both TTL- and CMOS-logic compatibility when using ±5V or a single +5V supply.
MAXIM IH5341/IH5352 handbook
MAXIM MAX310/311 CMOS RF/VIDEO multiplexers handbook handbook
MAXIM MAX4562/MAX4563 handbook
MAX4562/MAX4563 are serial-interface controlled switches from Maxim Integrated, which are ideal for multimedia applications. They feature 30 ohms maximum on-resistance (RON), 5 ohms RON match, and 5 ohms RON flatness. They can achieve -85dB audio off-isolation and crosstalk at 20kHz, and -55dB video off-isolation and crosstalk at 10MHz.
MAXIM MAX4571 MAX4574 Serially Controlled Clickless Audio/Video Switches handbook
The MAX4571~MAX4574 series chips are ideal audio video multimedia switches
MAXIM MAX4548/MAX4549 handbook
The MAX4548/MAX4549 series is an ideal triple 3x2 audio/video crosspoint switch for multimedia applications.
MAXIM MAX4584/MAX4585 handbook
This document is the introduction manual of MAX4584/MAX4585 series products, which introduces the features and characteristics of the products, including single switch, double switch, switch resistance, signal isolation, serial interface, etc.
MAXIM MAX4586/MAX4587 handbook
The MAX4586/MAX4587 are a series of serially controlled, 4-channel audio/video multiplexers ideal for multimedia applications. They feature 65Ω on-resistance, 4Ω on-resistance matching between channels, and 5Ω on-resistance flatness. Additionally, they feature -83dB off-isolation at 20kHz and -48dB off-isolation at 10MHz, with -84dB crosstalk at 20kHz and -60dB crosstalk at 10MHz. The MAX4586 uses a 2-wire, I2C™-compatible serial interface; the MAX4587 uses a 3-wire, SPI™/QSPI™/ MICROWIRE™-compatible interface. Both devices are available in 10-pin µMAX packages and are specified for the extended -40°C to +85°C temperature range. Applications include cellular phones and accessories, private mobile radios (PMRs), PC multimedia audio/video routing, industrial equipment, set-top boxes, video conferencing, and high-end audio equipment.
MAXIM MAX4529 Low-Voltage Bidirectional RF/Video Switch handbook
The MAX4529 is a low-voltage T-switch designed for switching RF and video signals from DC to 300MHz in 50- and 75-ohm systems. The switch is constructed in a “T” configuration, ensuring excellent high-frequency off isolation of -80dB at 10MHz. The MAX4529 can handle Rail-to-Rail® analog signals in either direction. On-resistance (70 ohms max) is flat (0.5 ohms max) over the specified signal range, using ±5V sup- plies. The off leakage current is less than 1nA at +25°C and 20nA at +85°C. This CMOS switch can operate with dual power sup- plies ranging from ±2.7V to ±6V or a single supply between +2.7V and +12V. All digital inputs have 0.8V/2.4V logic thresholds, ensuring both TTL- and CMOS-logic compatibility when using ±5V or a single +5V supply.
MAXIM MAX4310 MAX4315 handbook
MAXIM MAX4023 MAX4026 handbook
The MAX4023–MAX4026 family of voltage feedback multiplexer-amplifiers combine low-glitch switching and excellent video specifications with fixed or settable gain. The MAX4024/MAX4026 are triple and quad 2:1 multiplexers, respectively, with amplifiers that have a fixed gain of +2. The MAX4023/MAX4025 are triple and quad 2:1 multiplexers, respectively, with adjustable gain amplifiers optimized for unity-gain stability. All devices have 25ns channel switching time and low 10mVP-P switching transients, making them ideal for high-speed video-switching applications. These devices operate from a single +4.5V to +11V supply or from dual supplies of ±2.25V to ±5.5V, and feature an input common-mode voltage range that extends to the negative supply rail. A low-power disable mode places the output in a high-impedance state. The MAX4023/MAX4025 have -3dB bandwidths of 260MHz and up to 330V/µs slew rates with a settable gain to equalize long cable runs. The MAX4024/ MAX4026, with 200MHz -3dB bandwidths and 363V/µs slew rates, have a fixed gain of +2 for driving short back-terminated cables. The MAX4023/MAX4025 inter- nal amplifiers maintain an open-loop output impedance of only 18Ω over the full output voltage range, and mini- mize the gain error and bandwidth changes under loads typical of most rail-to-rail amplifiers. These devices are ideal for broadcast video applications with differential gain and phase errors of 0.07% and 0.07°, respectively.
MAXIM MAX4027 225MHz Triple 2-Channel Video Multiplexer-Amplifier handbook
The MAX4027 is a triple, wideband, 2-channel, noninverting gain-of-two video amplifier with input multiplexing, capable of driving up to two back-terminated video loads. The MAX4027 features current-mode feedback amplifiers configured for a gain of two (+6dB) with a -3dB large-signal bandwidth of 200MHz. The device has low (0.012%/0.014°) differential gain and phase errors, and operates from ±5V supplies. The MAX4027 is ideal for use in broadcast and graphics video systems because of the low 2pF input capacitance, channel-to-channel switching time of only 15ns, and wide 62MHz, large-signal 0.1dB bandwidth. High-impedance output disabling allows the MAX4027 to be incorporated into large switching arrays with minimal interaction with the source. Specified over the -40°C to +85°C extended temperature range, the MAX4027 is available in 14-pin SO and TSSOP packages. Applications include video source selection (multiplexing), picture in picture (PIP) insertion, crosspoint expansion, coaxial cable drivers, etc.
MAXIM MAX4028/MAX4029 Triple/Quad 2:1 Video Multiplexer-Amplifiers with Input Clamps handbook
MAX4028/MAX4029 are 5V, triple/quad, 2:1 voltage- feedback multiplexer-amplifiers with input clamps and a fixed gain of +2V/V (6dB). Channel 1 (IN1A and IN1B) inputs are clamped to the video sync tip of the input sig- nal, while the remaining inputs can be clamped to either the video sync tip or the video sync of channel 1 (IN1_). The latter is referred to as a key clamp and is pin selec- table. Selectable clamp/key-clamp inputs and fixed-gain video output buffers make the MAX4028/MAX4029 ideal for video-source switching applications such as automo- tive entertainment systems, video projectors, and dis- plays/TVs. Both devices have 20ns channel switching times and low ±10mVP-P switching transients, making them ideal for high-speed video switching applications such as on-screen display (OSD) insertion. The MAX4028/MAX4029 have a -3dB large-signal (2VP-P) bandwidth of 130MHz, a -3dB small-signal bandwidth of 210MHz, and a 300V/µs slew rate. Low differential gain and phase errors of 0.2% and 0.4°, respectively, make these devices ideal for broadcast video applications. The MAX4028/MAX4029 are specified over the -40°C to +85°C extended temperature range and are offered in 16-pin and 20-pin TSSOP/SO packages.