Maxim manuals, page 65
MAXIM MAX9875 Low RF Susceptibility Mono Audio Subsystem with DirectDrive Headphone Amplifier handbook
MAX9875 is a high-efficiency Class D audio power amplifier with a built-in stereo AB-class capacitor-less DirectDrive headphone amplifier. This amplifier uses Maxim's third-generation filterless Class D amplifier technology with active emissions limiting technology to provide Class AB performance with Class D efficiency. The MAX9875 can provide up to 725mW of power from a 3.7V supply to an 8Ω load with an efficiency of 87%, extending battery life. The filterless modulation scheme combined with active emissions limiting circuitry and spread-spectrum modulation greatly reduces EMI while eliminating the need for output filtering used in traditional Class D devices. The stereo AB-class headphone amplifier in the MAX9875 uses Maxim's DirectDrive architecture, which produces a ground-referenced output from a single supply, eliminating the need for large DC-blocking capacitors, saving cost, space and component height. The device uses a user-defined input architecture, three preamplifier gain settings, an input mixer, volume control, comprehensive click-and-pop suppression and I2C control. The MAX9875 is available in a thermally efficient, space-saving 20-bump WLP package.
MAXIM MAX97000 Audio Subsystem with Mono Class D Speaker Class H Headphone Amplifier handbook
The document introduces the MAX97000 audio subsystem. The subsystem includes a mono Class D speaker amplifier and a Class H headphone amplifier, as well as an analog DPST switch. The subsystem is designed for maximum efficiency, high gain, low power consumption and low distortion. It is suitable for applications such as cell phones and portable multimedia players.
MAXIM MAX97002 Manual
The MAX97002 is an integrated audio subsystem with mono Class D speaker and Class H headphone amplifiers. The speaker amplifier supports 700mW output power and the headphone amplifier supports 2.5V headphone output. It supports low power shutdown mode and uses 2-wire I2C interface for control.
MAXIM MAX97001 Audio Subsystem with Mono Class D Speaker Class H Headphone Amplifiers handbook
MAX97001 is a mono audio subsystem that combines a mono speaker amplifier with a stereo headphone amplifier and an analog DPST switch. It features independent volume control and on/off control for the headphone and speaker amplifiers. The 4 inputs can be configured as 2 differential inputs or 4 single-ended inputs. The MAX97001 is designed for maximum efficiency, with a low-power Class D speaker amplifier and a dual-mode charge pump for the headphone amplifier. The speaker amplifier includes a distortion limiter to automatically reduce volume level during excessive clipping. Control is performed using the 2-wire I2C interface.
MAXIM MAX97003 High-Efficiency Low-Noise Audio Subsystem handbook
The MAX97003 is a high-efficiency, low-noise audio subsystem that combines a mono speaker amplifier with a stereo headphone amplifier. The headphone and speaker amplifiers have independent volume and on/off controls. The four inputs can be configured as two differential or four single-ended inputs. To minimize output noise, both the headphone and speaker outputs utilize a downward expander/noise gate to attenuate noise when no desired input signal is present. The speaker output incorporates an adjustable dynamic range compressor (DRC) and distortion limiter to protect the speaker and maximize loudness. This allows high gain for low-level signals without compromising the quality of large signals. All controls are performed using the two-wire I2C interface. The IC operates in the extended -40°C to +85°C temperature range, and is available in the 2.0mm x 2.4mm, 20-bump WLP package (0.4mm pitch). Applications include cell phones and portable media players.
MAXIM MAX9730 Manual
The MAX9730 is a mono Class G power amplifier with an integrated inverting charge-pump power supply. The charge pump can supply up to 500mA of peak output current over a 2.7VDC to 5.5VDC supply voltage range, guaranteeing up to 2.4W output power into an 8Ω load. The MAX9730 maximizes battery life by offering high-performance efficiency. Maxim’s proprietary output stage provides efficiency levels greater than Class AB devices without the EMI penalties commonly associated with Class D amplifiers. High efficiency allows the MAX9730 to be packaged in a WLP package without derating the output power handling capability. The device utilizes fully differential inputs and outputs, comprehensive click-and-pop suppression, shutdown control, and soft-start circuitry. The MAX9730 is fully specified over the -40°C to +85°C extended temperature range and is available in ultra-small, lead-free, 20-bump WLP (2mm x 2.5mm) and 28-pin TQFN (4mm x 4mm) packages.
MAXIM MAX9788 Manual
The MAX9788 features a mono Class G power amplifier with an integrated inverting charge-pump power supply specifically designed to drive the high capacitance of a ceramic loudspeaker. The charge pump can supply greater than 700mA of peak output current at 5.5VDC, guaranteeing an output of 14VP-P. The MAX9788 maximizes battery life by offering high- performance efficiency. Maxim’s proprietary Class G output stage provides efficiency levels greater than Class AB devices without the EMI penalties commonly associated with Class D amplifiers. The MAX9788 is ideally suited to deliver the high out- put-voltage swing required to drive ceramic/piezoelec- tric speakers. The device utilizes fully differential inputs and outputs, comprehensive click-and-pop suppression, shutdown control, and soft-start circuitry. The MAX9788 is fully spec- ified over the -40°C to +85°C extended temperature range and is available in small lead-free 28-pin TQFN (4mm x 4mm) or 20-bump WLP (2mm x 2.5mm) packages.
MAXIM MAX9738 Manual
MAXIM MAX98500 Manual
The MAX98500 is a high-efficiency, Class D audio amplifier that features an integrated boost converter to deliver a constant output power over a wide range of battery supply voltages. It has automatic level control with a battery tracking function that reduces the output swing as the supply voltage drops, preventing collapse of battery voltage. The MAX98500 also features three selectable gain settings. This product is suitable for applications such as cell phones, smartphones, GPS devices, mobile internet devices, and active speaker accessories.
MAXIM MAX9712 Manual
MAX9712 is a single-channel D class audio power amplifier that delivers Class AB amplifier performance with Class D efficiency, conserving board space and extending battery life. Using a class D architecture, the MAX9712 delivers up to 500mW into an 8Ω load while offering efficiencies above 85%.
MAXIM MAX9700 Manual
The MAX9700 is a single-channel D class audio power amplifier that provides class AB amplifier performance with class D efficiency, conserving board space and extending battery life. Using a class D architecture, the MAX9700 delivers 1.2W into an 8Ω load while offering efficiencies above 90%. A low-EMI modulation scheme renders the traditional class D output filter unnecessary. The MAX9700 offers two modulation schemes: a fixed-frequency (FFM) mode, and a spread-spectrum (SSM) mode that reduces EMI-radiated emissions due to the modulation frequency. Furthermore, the MAX9700 oscillator can be synchronized to an external clock through the SYNC input, allowing the switching frequency to be user defined. The SYNC input also allows multiple MAX9700s to be cascaded and frequency locked, minimizing interference due to clock intermodulation. The device utilizes a fully differential architecture, a full-bridged output, and comprehensive click-and-pop suppression. The gain of the MAX9700 is set internally (MAX9700A: 6dB, MAX9700B: 12dB, MAX9700C: 15.6dB, MAX9700D: 20dB), further reducing external component count. The MAX9700 features high 72dB PSRR, a low 0.01% THD+N, and SNR in excess of 90dB. Short-circuit and thermal-overload protection prevent the device from damage during a fault condition. The MAX9700 is available in 10-pin TDFN (3mm ✕ 3mm ✕ 0.8mm), 10-pin µMAX®, and 12-bump UCSP™ (1.5mm ✕ 2mm ✕ 0.6mm) packages. The MAX9700 is specified over the extended -40°C to 125°C temperature range.
MAXIM MAX9713/MAX9714 Manual
The MAX9713/MAX9714 are filterless Class D audio power amplifiers from MAXIM that provide Class AB amplifier performance with Class D efficiency, conserving board space and eliminating the need for a bulky heatsink.
MAXIM MAX9703/MAX9704 handbook
The MAX9703/MAX9704 mono/stereo Class D audio power amplifiers provide Class AB amplifier performance with Class D efficiency, conserving board space and eliminating the need for a bulky heatsink.
MAXIM MAX9715 handbook
MAX9715 is the second generation of Maxim's high efficiency Class D audio power amplifier, providing up to 2.8W per channel into a 4Ω speaker with a 5V supply.
MAXIM MAX9759 Manual
The MAX9759 is a single-channel D-Class audio power amplifier that provides Class AB amplifier audio performance with the benefits of Class D efficiency, eliminating the need for a heatsink and extending battery life. The MAX9759 delivers up to 3.2W of continuous power into a 4Ω load while offering greater than 90% efficiency. Maxim’s next-generation, low-EMI modulation scheme allows the amplifier to operate without an external LC filter while still meeting FCC EMI-radiated emission levels. The MAX9759 offers two modulation schemes: a fixed-frequency modulation (FFM) mode and a spread-spectrum modulation (SSM) mode. The SSM mode flattens the wideband spectral components, reducing EMI-radiated emissions due to the modulation frequency. Furthermore, the MAX9759 oscillator can be synchronized to an external clock through the SYNC input, allowing the switching frequency to range from 1000kHz to 1600kHz. The SYNC input and SYNC_OUT output of the MAX9759 allow multiple Maxim Class D amplifiers to be cascaded and frequency locked, minimizing interference due to clock intermodulation. The MAX9759 utilizes fully differential input amplifiers, a full-bridged output, comprehensive click-and-pop suppression, and features four selectable gain settings (6dB, 12dB, 18dB, 24dB). The MAX9759 features high 81dB PSRR, low 0.02% THD+N, and SNR in excess of 90dB. Short-circuit and thermal-overload protection prevents damage to the device during a fault condition. The MAX9759 op