Texas Instruments manuals, page 81
TEXAS INSTRUMENTS SN74F112 DUAL NEGATIVE-EDGE-TRIGGERED J-K FLIP-FLOP WITH CLEAR AND PRESET handbook
The SN74F112 is a dual negative-edge-triggered J-K flip-flop with clear and preset functions. It contains two independent J-K flip-flops. A low level at the preset or clear inputs sets or resets the outputs regardless of the levels of the other inputs. Data at the J and K inputs meeting the setup time requirements is transferred to the outputs on the negative-going edge of the clock pulse. Clock triggering occurs at a voltage level and is not directly related to the rise time of the clock pulse. Following the hold-time interval, data at the J and K inputs may be changed without affecting the levels at the outputs. The SN74F112 can perform as a toggle flip-flop by tying J and K high. The device is characterized for operation from 0°C to 70°C.
TEXAS INSTRUMENTS SN74LVC112A DUAL NEGATIVE-EDGE-TRIGGERED J-K FLIP-FLOP WITH CLEAR AND PRESEThandbook
SN74LVC112A is a dual negative-edge-triggered J-K flip-flop with clear and preset functions. It operates from 1.65V to 3.6V and accepts input voltages up to 5.5V. It has a fast propagation delay and stable output levels. Can be used as a flip-flop or toggle flip-flop.
TEXAS INSTRUMENTS CD54HC107 CD74HC107 CD74HCT107 Dual J-K Flip-Flop with Reset Negative-Edge Trigger handbook
The document describes the features and characteristics of Harris Semiconductor SCHS139D, including hysteresis on clock inputs for improved noise immunity and increased input rise and fall times, asynchronous reset, complementary outputs, buffered inputs, wide operating temperature range, balanced propagation delay and transition times, etc.
TEXAS INSTRUMENTS CD54AC112 CD74AC112 DUAL J-K NEGATIVE-EDGE-TRIGGERED FLIP-FLOPS WITH CLEAR AND PRESEThandbook
CD54AC112, CD74AC112 is a dual J-K negative-edge-triggered flip-flop with clear and preset functions from Texas Instruments.
TEXAS INSTRUMENTS SN54LS112A Data Sheet
The document contains information about several orderable devices, including their models, package types, pin count, package quantity, and other characteristics.
TEXAS INSTRUMENTS CD4027B Types Data Sheet
CD4027B is a four-bit exclusive OR gate produced by Texas Instruments. It has 16 pins and is available in ceramic dual in-line, plastic dual in-line, small outline and thin shrink small outline packages.
TEXAS INSTRUMENTS SN54ACT374 SN74ACT374 OCTAL D-TYPE EDGE-TRIGGERED FLIP-FLOPS WITH 3-STATE OUTPUTS handbook
SN54ACT374, SN74ACT374 are two 8-bit D-type edge-triggered flip-flops, their output pins are designed with 3-state output, which makes them very suitable for driving high-capacitance or relatively low-impedance loads.
TEXAS INSTRUMENTS 74AC11074 handbook
This document describes a CMOS device with enhanced performance, which contains two independent positive-edge-triggered D-type flip-flops. It features low power consumption and high-speed switching noise suppression.
TEXAS INSTRUMENTS SN74AUC1G80 SINGLE POSITIVE-EDGE-TRIGGERED D-TYPE FLIP-FLOP handbook
This document describes the features and characteristics of the SN74AUC1G80 single positive-edge-triggered D-type flip-flop. The flip-flop is designed for operation at 1.65V to 1.95V and features low power consumption, high output drive capability, and noise immunity.
TEXAS INSTRUMENTS SN54S74 handbook
No summary information found.
TEXAS INSTRUMENTS SN54LV273A SN74LV273A handbook
SN54LV273A/SN74LV273A are 8-bit D flip-flops designed for 2-V to 5.5-V VCC operation.
TEXAS INSTRUMENTS SN74AC574 handbook
SN54AC574/SN74AC574 is an 8-bit D-type flip-flop with 3-state outputs designed specifically for driving highly capacitive or relatively low-impedance loads. The device is particularly suitable for implementing buffer registers, I/O ports, bidirectional bus drivers, and working registers.
TEXAS INSTRUMENTS SN54AV534 handbook
SN74AC534N is an eight-bit edge-triggered D-type flip-flop produced by Texas Instruments. The device has 3-state outputs designed specifically for driving highly capacitive or relatively low-impedance loads. The devices are particularly suitable for implementing buffer registers, I/O ports, bidirectional bus drivers, and working registers.
TEXAS INSTRUMENTS CD54HC175 CD74HC175 CD54HCT175 CD74HCT175 handbook
This data sheet introduces the features and characteristics of CD54HC175 and CD74HC175 quad high-speed D flip-flops.
TEXAS INSTRUMENTS SN54ALS874B SN74ALS874B SN74ALS876A SN74AS874 SN74AS876 DUAL 4-BIT D-TYPE EDGE-TRIGGERED FLIP-FLOPS handbook
SN54ALS874B, SN74ALS874B, SN74ALS876A SN74AS874, SN74AS876 DUAL 4-BIT D-TYPE EDGE-TRIGGERED FLIP-FLOPS is a series of products produced by Texas Instruments, with 3-State buffer output, can directly drive bus lines, and has selection of true value logic and asynchronous clear function.