Texas Instruments manuals, page 77
TEXAS INSTRUMENTS BUF04701 Manual
The BUF04701 is a low-power, high-voltage, four-channel buffer from TI with a working voltage range of 3.5V to 12V, a 3dB bandwidth of 8MHz and a slew rate of 10V/µs. It draws only 1.1mA of quiescent current.
TEXAS INSTRUMENTS SN74LVC3G07 handbook
This document describes a triple buffer/driver product with open-drain outputs. It supports 5V VCC operation and features low power consumption, high output drive capability, and ESD protection.
TEXAS INSTRUMENTS A78M00 SERIES handbook
The µA78M00 series of positive-voltage regulators is a three-terminal regulator with an output current of up to 500 mA, no external components, internal thermal overload protection, high power dissipation capability, internal short-circuit current limiting, output transistor safe-area compensation, and is a direct replacement for the Fairchild µA78M00 series.
TEXAS INSTRUMENTS DIT4192 192kHz Digital Audio Transmitter handbook
The DIT4192 is a digital audio transmitter designed for use in both professional and consumer audio applications. Trans- mit data rates up to 192kHz are supported. The DIT4192 supports both software and hardware operation, which makes it suitable for applications with or without a microcontroller. A flexible serial audio interface is provided, supporting stan- dard audio data formats and easy interfacing to audio DSP serial ports.
TEXAS INSTRUMENTS SN54LVT245B SN74LVT245B 3.3-V ABT OCTAL BUS TRANSCEIVERS WITH 3-STATE OUTPUTS handbook
SN54LVT245B and SN74LVT245B are 3.3-V ABT octal bus transceivers with 3-state outputs. They are designed using state-of-the-art BiCMOS technology for 3.3-V operation and low static-power dissipation. These devices support mixed-mode signal operation with 5-V input and output voltages using 3.3-V VCC. They also support unregulated battery operation down to 2.7 V. The typical VOLP (output ground bounce) is less than 0.8 V at VCC = 3.3 V and TA = 25°C. They provide Ioff and power-up 3-state support for hot insertion. The latch-up performance exceeds 100 mA per JESD 78, Class II. The ESD protection exceeds JESD 22 specifications, with a 2000-V human-body model (A114-A), 200-V machine model (A115-A), and 1000-V charged-device model (C101). Package options include plastic small-outline (DW), shrink small-outline (DB), and thin shrink small-outline (PW) packages, ceramic chip carriers (FK), ceramic flat (W) packages, and ceramic (J) DIPs.
TEXAS INSTRUMENTS TFP6022 TFP6024 PanelBus VIDEO ENCODER handbook
TFP6022 and TFP6024 are part of the PanelBus flat panel display product family, primarily targeted at desktop and notebook PCs. They find applications in any design requiring TV-out support, such as PC-to-TV applications with source from DVD players and digital camcorders/cameras. They support standard NTSC and PAL video specifications, seamlessly interface with Intel's Whitney and future Intel chipsets' DVO port, support 24-bit RGB and YCrCb input formats, support CCIR-656 YCbCr 4:2:2 input format, and offer various analog composite video output formats. They also support simultaneous composite and S-Video (Y/C component) or YPrPb component output, include an SCART interface for simultaneous composite and interlaced RGB output, have programmable functionality and I2C serial interface, feature four 10-bit DACs, 2X over-sampling and optimized filters for luma and chroma channels, and have reduced power consumption with a 1.8V digital core and 3.3V analog circuit. They are manufactured using TI's 0.18µm EPIC-5 CMOS process, and the TFP6024 model incorporates Macrovision 7.11 support.
TEXAS INSTRUMENTS TPS61020 TPS61024 TPS61025 handbook
The TPS6102x series is a high efficiency synchronous boost converter with an adjustable output voltage, an input voltage range of 0.9V to 6.5V, and an output current of up to 200mA. It can be used for products powered by a single-cell, two-cell, or three-cell alkaline, nickel cadmium, or nickel metal hydride battery, or it can be used to generate 5V at 500mA from a 3.3V or Li-Ion battery.
TEXAS INSTRUMENTS TPS40192 TPS40193 Manual
The TPS40192/3 are cost-optimized synchronous buck controllers that operate from 4.5 V to 18 V input. These controllers implement a voltage-mode control architecture with the switching frequency fixed at either 600 kHz (TPS40192) or 300 kHz (TPS40193). The higher switching frequency facilitates the use of smaller inductor and output capacitors, thereby providing a compact power-supply solution. An adaptive anti-cross conduction scheme is used to prevent shoot through.
TEXAS INSTRUMENTS ADS7822 12-Bit High-Speed 2.7V microPower Sampling ANALOG-TO-DIGITAL CONVERTER handbook
TEXAS INSTRUMENTS CC2500 handbook
CC2500 is a low cost true single chip 2.4 GHz transceiver designed for very low power wireless applications. Applications include 2400-2483.5 MHz ISM/SRD band systems, consumer electronics, wireless game controllers, wireless audio and wireless keyboard and mouse.
TEXAS INSTRUMENTS AM26LV32C AM26LV32I handbook
The AM26LV32 is a BiCMOS, quadruple, differential line receiver with 3-state outputs, designed to be similar to TIA/EIA-422-B and ITU Recommendation V.11 receivers, but with a reduced common-mode voltage range due to reduced supply voltage. The device is optimized for balanced bus transmission at switching rates up to 32 MHz. The enable function is common to all four receivers and offers a choice of active-high or active-low inputs. The 3-state outputs permit direct connection to a bus-organized system. Each device features receiver high input impedance and input hysteresis for increased noise immunity, and input sensitivity of ±200 mV over a common-mode input voltage range from −0.3 V to 5.5 V. When the inputs are open circuited, the outputs are in the high logic state. This device is designed using the Texas Instruments (TI) proprietary LinIMPACT-C60 technology, facilitating ultra-low power dissipation.
TEXAS INSTRUMENTS OPA227/OPA228 series handbook
High Precision, Low Noise OPERATIONAL AMPLIFIERS
TEXAS INSTRUMENTS -TPS40303 TPS40304 TPS40305 Data Sheet
The TPS4030x is a family of cost-optimized synchronous buck controllers that operate from 3-V to 20-V input. The controller implements a voltage-mode control architecture with input-voltage feed-forward compensation that responds instantly to input voltage change. The switching frequency is fixed at 300 KHz, 600 KHz or 1.2 MHz. Frequency Spread Spectrum feature adds dither to the switching frequency, significantly reducing the peak EMI noise and making it much easier to comply with EMI standards. The TPS4030x has good EMI performance and can be used in various applications such as POL modules, printers, digital TVs and telecommunications.
TEXAS INSTRUMENTS SC2117 Low-Power Audio Codec With Embedded miniDSP Stereo Class-D Speaker Amplifier Smart Four-Wire Touch-Screen Controller Manual
TEXAS INSTRUMENTS SN75HVD08 SN65HVD08 WIDE SUPPLY RANGE RS-485 TRANSCEIVER handbook
The SN65HVD08 and SN75HVD08 are RS-485 transceivers from TI with wide supply voltage range, low quiescent current and 1/8th unit load