This page provides manuals, user guides, handbooks, instructions, specification, instruction, maintenance manual for Fairchild Automation control Equipment, Electronic Original, ...
The 74LCX138 is a high-speed 1-of-8 decoder/demultiplexer fabricated with advanced CMOS technology to achieve high speed operation while maintaining CMOS low power dissipation. This device is ideally suited for high-speed memory chip select address decoding and supports 2.3V to 3.6V VCC specifications.
The document describes a low voltage 16-bit transparent latch from Fairchild Semiconductor Corporation, which has 5V tolerant inputs and outputs and a 26Ω series resistor. The product is designed for bus oriented applications and has byte control functionality. The flip-flops are transparent to the data when the Latch Enable (LE) is high. When LE is low, the data that meets the setup time is latched. Data appears on the bus when the Output Enable (OE) is low. When OE is high, the outputs are in a high impedance state. The product is designed for low voltage (2.5V or 3.3V) VCC applications with the capability of interfacing to a 5V signal environment. The 26Ω series resistor in the output helps reduce output overshoot and undershoot. The product is fabricated with an advanced CMOS technology to achieve high speed operation while maintaining CMOS low power dissipation.
The LCX162244 is a low voltage 16-bit buffer/line driver with 26 ohm series resistors in outputs. It contains sixteen non-inverting buffers designed to be used as a memory and address driver, clock driver, or bus oriented transmitter/receiver. The device is nibble controlled, with separate 3-STATE control inputs for each nibble that can be shorted together for full 16-bit operation. The LCX162244 is designed for low voltage (2.5V or 3.3V) applications and can interface with a 5V signal environment. The outputs include equivalent 26 ohm series resistors to reduce overshoot and undershoot and can sink/source up to 12 mA at VCC = 3.0V. The LCX162244 is fabricated with advanced CMOS technology to achieve high speed operation while maintaining CMOS low power dissipation.
The LCX157 is a high-speed quad 2-input multiplexer. Four bits of data from two sources can be selected using the common Select and Enable inputs. The four outputs present the selected data in the true (noninverted) form. The LCX157 can also be used as a function generator. It is fabricated with advanced CMOS technology to achieve high speed operation while maintaining CMOS low power dissipation.
The 74LCX162374 is a 16-bit D-type flip-flop with 5V tolerant inputs and outputs and 26Ω series resistors. The device is designed for low voltage (2.5V or 3.3V) VCC applications with capability of interfacing to a 5V signal environment. The 26Ω series resistor in the output helps reduce output overshoot and undershoot. The device is fabricated with an advanced CMOS technology to achieve high speed operation while maintaining CMOS low power dissipation.
The LCX16244 is a low voltage 16-bit buffer/line driver with 5V tolerant inputs and outputs. It is designed to be used as a memory and address driver, clock driver, or bus oriented transmitter/receiver.
This document describes the features and characteristics of the 74LCX16244 Low Voltage 16-Bit Buffer/Line Driver produced by Fairchild Semiconductor Corporation, including 5V tolerant inputs and outputs, 2.5 or 3.3V VCC specifications, high-speed operation, low power dissipation, etc.
The 74LCX16245 is a low voltage 16-bit bidirectional transceiver with 5V tolerant inputs and outputs. It is designed for bus oriented applications and each byte has separate control inputs, which can be used for full 16-bit operation.
The LCX16373 is a low voltage 16-bit transparent latch with 5V tolerant inputs and outputs. It contains sixteen non-inverting latches with 3-STATE outputs and is intended for bus oriented applications. The device is byte controlled. The flip-flops appear transparent to the data when the Latch Enable (LE) is HIGH. When LE is LOW, the data that meets the setup time is latched. Data appears on the bus when the Output Enable (OE) is LOW. When OE is HIGH, the outputs are in a high impedance state. The LCX16373 is designed for low voltage (2.5V or 3.3V) VCC applications with capability of interfacing to a 5V signal environment. The LCX16373 is fabricated with an advanced CMOS technology to achieve high speed operation while maintaining CMOS low power dissipation.
The LCX16373 is a low voltage 16-bit transparent latch with 5V tolerant inputs and outputs. It is designed for bus oriented applications and has byte control. The flip-flops are transparent to the data when the latch enable (LE) signal is high. When LE is low, the data meeting the setup time is latched. The data appears on the bus when the output enable (OE) is low. When OE is high, the outputs are in a high impedance state. The LCX16373 is suitable for low voltage (2.5V or 3.3V) VCC applications and can interface with a 5V signal environment. It is fabricated using advanced CMOS technology to achieve high speed operation while maintaining low power dissipation.
This document describes the features and characteristics of the 74LCX16374 Low Voltage 16-Bit D-Type Flip-Flop with 5V Tolerant Inputs and Outputs produced by Fairchild Semiconductor Corporation. The product features 5V tolerant inputs and outputs, and is intended for bus oriented applications. It supports low voltage (2.5V or 3.3V) VCC applications and can interface with a 5V signal environment. The product is manufactured using advanced CMOS technology, enabling high speed operation and low power dissipation.
LM317AHV is a 3-terminal positive adjustable voltage regulator that is designed to supply more than 1.5A of load current with an output voltage adjustable over a 1.2 to 57V. It employs internal current limiting, thermal shut down and safe area compensation.
The MM74C00,MM74C02,MM74C04 series are four-input NAND gates, four-input NOR gates and six-way inverters manufactured by complementary MOS (CMOS) technology, which have wide power supply operating range, low power consumption, high noise immunity and symmetric controlled rise and fall times. It is an ideal choice for digital systems.
