Fairchild Manuals

The FPF2100 through FPF2107 is a family of load switches which provide full protection to systems and loads which may encounter large current conditions. These devices contain a 0.125Ω current-limited P-channel MOSFET which can operate over an input voltage range of 1.8-5.5V. Switch control is by a logic input (ON) capable of interfacing directly with low voltage control signals. Each part contains thermal shutdown protection which shuts off the switch to prevent damage to the part when a continuous over-current condition causes excessive heating. When the switch current reaches the current limit, the part operates in a constant-current mode to prohibit excessive currents from causing damage. For the FPF2100-FPF2102 and FPF2104-FPF2106, if the constant current condition still persists after 10ms, these parts will shut off the switch an

This document is about SMBJ5.0(C)A - SMBJ170(C)A, a 600W transient voltage suppressor with fast response time, excellent clamping capability and low incremental surge resistance.

This document provides the absolute maximum ratings and electrical characteristics of the TIP140T/141T/142T NPN Epitaxial Silicon Darlington Transistor manufactured by Fairchild Semiconductor Corporation.

TIP115/116/117 is a PNP type silicon Darlington transistor produced by Fairchild Semiconductor Corporation.

UC3525A is a monolithic integrated circuit that includes all of the control circuit necessary for a pulse width modulating regulator. There are a voltage reference, an error amplifier, a pulse width modulator, an oscillator, under-voltage lockout, soft start circuit, and output drivers in the chip.

The 74VCX162245 is a low voltage (1.65V to 3.6V) VCC application 16-bit bidirectional transceiver with 3.6V tolerant inputs and outputs and 26Ω series resistors in A port outputs, which can be used for memory address drivers, clock drivers and bus transceivers/transmitters.

The 74VCX162244 is a low voltage 16-bit buffer/line driver with 3.6V tolerant inputs and outputs and 26Ω series resistor in outputs. It is designed for low voltage applications with high-speed operation and low power dissipation.

The data sheet is about the 74VCX162240 low voltage 16-bit inverting buffer/line driver, which includes product features, characteristics, brand, model and other information.

This document introduces the 74VCX132, a low voltage quad 2-input NAND gate with Schmitt Trigger Inputs and 3.6V Tolerant Inputs and Outputs. This product is designed for low voltage (1.65V to 3.6V) VCC applications with I/O compatibility up to 3.6V. This product is fabricated with an advanced CMOS technology to achieve high-speed operation while maintaining low CMOS power dissipation.

The 74VCX08 is a low voltage quad 2-input AND gate with 3.6V tolerant inputs and outputs. It is designed for low voltage (1.2V to 3.6V) VCC applications with high-speed operation and low power dissipation.

The 74VCX00 is a low voltage quad 2-input NAND gate with 3.6V tolerant inputs and outputs. It is designed for low voltage (1.65V to 3.6V) VCC applications with I/O compatibility up to 3.6V. The VCX00 is fabricated with an advanced CMOS technology to achieve high-speed operation while maintaining low CMOS power dissipation.

NC7SP125 TinyLogic ULP Buffer with 3-STATE Output is a single Buffer with 3-STATE output from Fairchild’s Ultra Low Power (ULP) series of TinyLogic. Ideal for applications where battery life is critical, this prod- uct is designed for ultra low power consumption within the VCC operating range of 0.9V to 3.6V. The internal circuit is composed of a minimum of inverter stages, including the output buffer, to enable ultra low static and dynamic power. The NC7SP125, for lower drive requirements, is uniquely designed for optimized power and speed, and is fabricated with an advanced CMOS technology to achieve best in class speed operation while maintaining extremely low CMOS power dissipation.

The NC7SP126 is a single Buffer with 3-STATE output from Fairchild's Ultra Low Power (ULP) series of TinyLogic. Ideal for applications where battery life is critical, this product is designed for ultra low power consumption within the VCC operating range of 0.9V to 3.6V VCC. The internal circuit is composed of a minimum of inverter stages, including the output buffer, to enable ultra low static and dynamic power. The NC7SP126, for lower drive requirements, is uniquely designed for optimized power and speed, and is fabricated with an advanced CMOS technology to achieve best in class speed operation while maintaining extremely low CMOS power dissipation.

The NC7SP08 is a single 2-Input AND Gate from Fairchild’s Ultra Low Power (ULP) Series of TinyLogic. Ideal for applications where battery life is critical, this prod- uct is designed for ultra low power consumption within the VCC operating range of 0.9V to 3.6V VCC. The internal circuit is composed of a minimum of inverter stages including the output buffer, to enable ultra low static and dynamic power. The NC7SP08, for lower drive requirements, is uniquely designed for optimized power and speed, and is fabricated with an advanced CMOS technology to achieve best in class speed operation while maintaining extremely low CMOS power dissipation.

The product is a single open drain output inverter from Fairchild with an operating voltage range of 0.9V to 3.6V and extremely low power consumption and high speed.