Fairchild Manuals

NM24C16U/NM24C17U are 16K (16,384) bit serial interface CMOS EEPROMs (Electrically Erasable Programmable Read- Only Memory), fully conform to the Standard I2C™ 2-wire protocol, support Clock (SCL) and Data I/O (SDA) pins, and offer low voltage and low power options

The NZT651 is a NPN current driver transistor produced by Fairchild Semiconductor Corporation. This device is designed for high-speed power amplifier, regulator and switching circuits.

Absolute maximum ratings, electrical characteristics, typical values and symbol parameters of SB29003 high voltage transistor.

FJP13007 is a high voltage switch mode application NPN silicon transistor produced by Fairchild Semiconductor Corporation. It has high speed switching characteristics and is suitable for switching regulators and motor control.

FDP6676/FDB6676 is a 30V N-Channel Logic Level PowerTrench MOSFET with extremely low RDS(ON) that is optimized for low-side synchronous rectifier operation.

The FM24C04U/05U 4K-Bit Standard 2-Wire Bus Interface Serial EEPROM is a product of Fairchild Semiconductor International. This product conforms to the standard IIC 2-wire protocol and has 4096 bits of CMOS non-volatile electrically erasable memory.

FM93C56 2048-Bit Serial CMOS EEPROM (MICROWIRETM Synchronous Bus) is a 2048-bit CMOS non-volatile EEPROM organized as 128 x 16-bit array. This device features MICROWIRE interface which is a 4-wire serial bus with chipselect (CS), clock (SK), data input (DI) and data output (DO) signals. This interface is compat- ible to many of standard Microcontrollers and Microprocessors. There are 7 instructions implemented on the FM93C56 for various Read, Write, Erase, and Write Enable/Disable operations. This device is fabricated using Fairchild Semiconductor floating-gate CMOS process for high reliability, high endurance and low power consumption. “LZ” and “L” versions of FM93C56 offer very low standby current making them suitable for low power applications. This device is offered in both SO and TSSOP packages for small space consid- erations.

The FSTU3384 is a 10-bit high-performance CMOS TTL-compatible bus switch with low on-resistance, which allows inputs to be connected to outputs without adding propagation delay, generating additional ground bounce noise. Both ports are “undershoot hardened” to support an extended input range to 2.0V below ground and Fairchild’s integrated Undershoot Hardened Circuit (UHC) senses undershoot at the I/Os and responds by preventing voltage differentials from developing and turning on the switch. The device is organized as two 5-bit switches with separate bus enable (OE) signals. When OE is LOW, the switch is ON and Port A is connected to Port B. When OE is HIGH, the switch is OPEN and a high-impedance state exists between the two ports.

This datasheet introduces the parameters of 600V N-channel MOSFET FQB10N60C / FQI10N60C, including rated voltage, rated current, on-state resistance, gate capacitance, switching speed, etc.

This document describes Fairchild Semiconductor Corporation's T-3/4 subminiature LED lamps, including high-efficiency red, yellow, and green lamps. The lamps feature tinted diffused or water clear epoxy lenses in AIGaAs red, high-efficiency red, green, and yellow, producing wide-angle beam emission and sharp on/off contrast. They are available with various lead bend forms for different mounting requirements.

The product is HUFA75337G3, HUFA75337P3, HUFA75337S3S 75A, 55V, 0.014 Ohm, N-Channel UltraFET Power MOSFETs manufactured by Fairchild Semiconductor Corporation. It has outstanding performance and can be used in applications where power efficiency is important, such as switching regulators, switching converters, motor drivers, relay drivers, low-voltage bus switches, and power management in portable and battery-operated products.

This document describes the features and characteristics of HUFA76404DK8T N-Channel Dual MOSFET, including maximum rated voltage, drain current, power dissipation, etc.

This document describes the features and characteristics of the Fairchild Power Switch (FPS) product family, including precision fixed operating frequency, low start-up current, pulse by pulse current limiting, over current protection, over voltage protection, internal thermal shutdown function, under voltage lockout, and internal high voltage sense FET. The FPS is suitable for SMPS applications in VCRs, SVRs, STBs, DVDs, DVCDs, printers, facsimiles, scanners, and camcorder adapters.