Analog Devices manuals, page 88
ANALOG DEVICES ADE7754 datasheet
The ADE7754 is a high performance multifunctional polyphase energy metering IC with serial port interface. It meets IEC1036 requirement and provides high accuracy, low power consumption and easy to use.
ANALOG DEVICES ADE7756 handbook
This document describes the features and characteristics of ADE7756 single-phase energy metering IC, including programmable solution, analog front end, current sensor connection, digital calibration, energy measurement, zero crossing, SAG detection, calibration mode, waveform sampling, and temperature sensor.
ANALOG DEVICES ADE7759 datasheet
ANALOG DEVICES EE-162 handbook
This application note describes how to interface the ADSP-BF535 Blackfin® processor to high-speed converters, such as the AD9860/2, over the external memory bus.
ANALOG DEVICES UG-004: Understanding EVAL-CONTROL BRD2Z/EVAL-CONTROL BRD3Z PC Interface Issues Manual
This user guide details some issues regarding the EVAL-CONTROL BRD2Z/EVAL-CONTROL BRD3Z (ECB) and the parallel port (LPTn) of the PC and provides guidelines for configuring and testing the port(s) for compatibility.
ANALOG DEVICES AN-1006 APPLICATION NOTE
This application note introduces the EVAL-ADUSB2EBZ and describes its features and usage. The EVAL-ADUSB2EBZ is a USB-to-I2C and SPI converter that allows SigmaStudio™ integration for most SigmaDSP® processors. It features a standard Aardvark-compatible programming header and can provide SPI control of up to five slave devices.
ANALOG DEVICES A Power Meter Reference Design Based on the ADE7756 Manual
This application note describes a high-accuracy, low-cost power meter based on the ADE7756. The design is for use in the North American 3-wire/single-phase application. This meter may also be used in a single-phase, 2-wire distribution system with a minimal amount of changes. The reference design is comprised of the ADE7756, a microcontroller, LCD display, serial interface, and power supply. The ADE7756 is designed to interface to a microcontroller through a serial interface (SPI). The SPI port allows the user to calibrate various components of the meter, including gain, offset, and phase errors. The purpose of the microcontroller is to send display data to the LCD and control the various functions of the meter. An EEPROM is used to store various calibration parameters of the meter and store the meter’s data during a power-down. The entire meter is calibrated through an external calibration routine by a PC through an external SPI interface. The ADE7756 is comprised of two ADCs, a reference circuit, and all the signal processing necessary for the calculation of real (active) power. Circuitry is provided to null out various system errors including gain, phase, and offset errors.
ANALOG DEVICES AD7607: 8-Channel DAS with 14-Bit Bipolar Simultaneous Sampling ADC Preliminary Data Sheet (Rev B 2012-02-01-)
The AD7607 is a 14-bit, bipolar input, 8-channel simultaneous sampling data acquisition module (DAS) with fast throughput rate and low power consumption. The module is powered by a single supply, has power short circuit protection, and supports SPI, QSPI™, MICROWIRE™ and DSP compatible serial interfaces, and provides 14-bit to 18-bit compatible solutions.
ANALOG DEVICES AD7870/AD7875/AD7876: LC2MOS Complete 12-Bit 100 kHz Sampling ADCs Data Sheet (Rev C 2009-02-17-)
The AD7870/AD7875/AD7876 are fast, complete, 12-bit analog-to-digital converters (ADCs) with features such as a 2 μs track-and-hold amplifier, 8 μs ADC, on-chip reference, laser-trimmed clock, and parallel, byte, and serial digital interfaces.
ANALOG DEVICES ADE7518: Single-Phase Energy Measurement IC with 8052 MCU RTC LCD Driver Data Sheet (Rev 0 2009-02-04-)
ANALOG DEVICES ADW12001: 14-Bit 40 MSPS Dual Analog-to-Digital Converter Data Sheet (Rev 0 2009-01-20-)
The ADW12001 is a dual, 3 V, 14-bit, 40 MSPS analog-to-digital converter (ADC). It features dual high performance sample-and-hold amplifiers (SHAs) and an integrated voltage reference. The ADW12001 is suitable for applications such as ultrasound equipment, direct conversion or IF sampling receivers, WB-CDMA, CDMA2000, WiMAX, battery-powered instruments, hand-held scopemeters, and low cost digital oscilloscopes.
ANALOG DEVICES ADE7116/ADE7156/ADE7166/ADE7169/ADE7566/ADE7569: Single-Phase Energy Measurement IC with 8052 MCU RTC LCD Driver Data Sheet (Rev B 2008-11-11-)
This document describes the features and characteristics of the ADE7116/ADE7156/ADE7166/ADE7169/ADE7566/ADE7569 single-phase energy measurement IC, including wide supply voltage operation, ultralow power operation modes, real-time clock, reference voltage, etc.
ANALOG DEVICES AD1672S: 12-Bit 3 MSPS A to D Converter Aerospace Data Sheet (Rev G 2008-12-19-)
Detailed information on 12-Bit, 3 MSPS, A to D Converter AD1672 ASD0010965 Rev. G, including its usage, features and technical parameters
ANALOG DEVICES The Residual Phase Noise Measurement Manual
This application note describes a technique to evaluate DUT noise by removing external noise sources. A residual phase noise setup is used to isolate and measure the additive phase noise contribution of a device. Designers use this information to select individual devices for their signal chain, which, in aggregate, meet the phase noise requirements for their complete system. The benefit of a residual phase noise setup is that the effect of noise sources external to the device under test (DUT), such as power supplies or input clocks, can be canceled from the measurement. Conversely, an absolute phase noise measurement includes the impact of power supply noise and reference clock noise. This application note includes actual phase noise measurement plots of a clocked device to highlight the attributes of the residual phase noise setup. In addition, it demonstrates how the additive phase noise of a device can be used to identify the source of noise-related issues in the signal chain.
ANALOG DEVICES AD6640/AD6620 Multi-Channel Multi-Mode Receiver Chipset Manual
FUTURE-PROOF BASE STATIONS WITH NEXT-GENERATION DIGITAL RADIO