ANALOG Manuals

The AD7492 is a 12-bit high-speed, low-power successive-approximation ADC. The device operates from a single 2.7 V to 5.25 V power supply and supports throughput rates up to 1.25 MSPS. The AD7492 contains a low-noise, wide bandwidth 2.5 V internal reference and on-chip clock oscillator. It also features flexible power/throughput rate management and no pipeline delays. The AD7492 is ideal for a variety of high-precision measurement applications.

The AD8561 is a single 7 ns comparator with separate input and output sections. Separate supplies enable the input stage to be operated from ±5 V dual supplies and +5 V single supplies. Fast 7 ns propagation delay makes the AD8561 a good choice for timing circuits and line receivers. Propagation delays for rising and falling signals are closely matched and track over temperature. This matched delay makes the AD8561 a good choice for clock recovery, since the duty cycle of the output will match the duty cycle of the input. The AD8561 has the same pin configuration as the AD8562 and AD8563 and comes in the same packages.

AD7329 is a 1 MSPS, 8-channel, software-selectable, true bipolar input, 12-bit plus sign ADC

This datasheet provides detailed information about ADM206E/ADM207E/ADM208E/ADM211E/ADM213E products, including product functions, features, specifications, etc.

This document describes the AD7938/AD7939, an 8-channel, 1.5 MSPS, 12-bit and 10-bit parallel ADC. It features configurable analog input channels, accurate on-chip 2.5V reference, and a high-speed parallel interface.

The AD7490 is a 12-bit high speed, low power, 16-channel, successive-approximation ADC. The part operates from a single 2.7 V to 5.25 V power supply and features throughput rates up to 1 MSPS. The part contains a low noise, wide bandwidth tra

AD7366-5/AD7367-5 is a 12/14-bit dual-channel analog-to-digital converter (ADC) from Analog Devices. It features multiple programmable input ranges of ±10V, ±5V, 0V to +10V, and ±12V with a +3V external reference, a conversion rate of up to 500kSPS, high analog input impedance, and low power consumption.

The ADAU1702 is a 28-bit/56-bit audio processor with two ADCs and four DACs. It has a processing power of 25 MIPS, two ADCs with 100 dB SNR and -83 dB THD+N, and four DACs with 104 dB SNR and -90 dB THD+N. The device has a fully standalone operating mode and can be self-booted from a serial EEPROM. It also features an auxiliary ADC, GPIOs, and a programmable SigmaStudio™ graphical tool.

The AD8132 is a low cost, high speed differential amplifier with resistor settable gain. The AD8132 is a major advancement over op amps for driving differential input ADCs or for driving signals with fast rise times.

This document describes the features and characteristics of the ADV7174/ADV7179 chip scale PAL/NTSC video encoder, including ITU-R1 BT601/BT656 YCrCb to PAL/NTSC video encoder, high quality 10-bit video DACs, advanced power management features, etc.

The AD598 is a complete, monolithic Linear Variable Differential Transformer (LVDT) signal conditioning subsystem. It is used in conjunction with LVDTs to convert transducer mechanical position to a unipolar or bipolar dc voltage with a high degree of accuracy and repeatability. All circuit functions are included on the chip. With the addition of a few external passive components to set frequency and gain, the AD598 converts the raw LVDT secondary output to a scaled dc signal. The device can also be used with RVDT transducers.

The AD5930 is a programmable frequency sweep and output burst waveform generator. It features a programmable frequency profile, no external components necessary, output frequency up to 25 MHz, burst and listen capability, preprogrammable frequency profile minimizes number of DSP/µcontroller writes, sinusoidal/triangular/square wave outputs, automatic or single pin control of frequency stepping, waveform starts at known phase, increments at 0° phase or phase continuously, power-down mode: 20 µA, power supply: 2.3 V to 5.5 V, automotive temperature range: −40°C to +125°C, 20-lead pb-free TSSOP. It is suitable for frequency sweeping/radar, network/impedance measurements, incremental frequency stimulus, sensory applications, proximity and motion, BFSK frequency bursting/pulse trains, etc.

AD7357 is a dual 14-bit SAR ADC with a maximum conversion rate of 4.2 MSPS and a 2.5 V supply voltage. It is packaged in a 16-lead TSSOP.

AD8510/AD8512/AD8513 are low noise, low input bias current, wide bandwidth JFET operational amplifiers produced by Analog Devices