Analog Devices Manuals

The AD7829-1 is a high-speed, 8-channel, microprocessor-compatible, 8-bit analog-to-digital converter with a maximum throughput of 2 MSPS. The AD7829-1 contains an on-chip reference (2.5 V), automatic power-down at the end of conversion, and wide operating supply range (3 V ± 10% and 5 V ± 10%).

The AD7796/AD7797 are complete analog front ends for high precision bridge sensor applications. They include a Σ-Δ ADC with 16-/24-bit resolution, respectively. The on-chip instrumentation amplifier has features such as low power consumption, high noise rejection, high update rate, etc.

AD7794/AD7795 is a low noise, low power 6-channel 24/16-bit ∑-Δ ADC with on-chip in-amp and reference for temperature measurement and other applications.

The document describes an 18-bit, 1.5 LSB INL, 250 kSPS PulSAR differential ADC with features such as high resolution, low noise, and wide dynamic range.

AD7142 is a programmable 14-channel capacitive touch sensor controller that supports SPI® and I2C® interfaces, with a 36 ms update rate and 1 fF resolution.

AD9254 is a 14-bit, 150 MSPS, 1.8 V Analog-to-Digital Converter.

AD9252 is a 8-channel, 14-bit, 50 MSPS, Serial LVDS, 1.8 V ADC data sheet from Analog Devices

AD9212 is an 8-channel, 10-bit, 40 MSPS/65 MSPS, serial LVDS, 1.8 V ADC produced by Analog Devices. It has the characteristics of low power consumption, high precision, low noise, and is suitable for medical imaging, non-destructive ultrasound, portable ultrasound, industrial measurement and other fields.

AD7951 is a 14-bit, 1 MSPS, programmable input range Pulsar® ADC with multiple input ranges and mode selection, which can operate at 1 MSPS (warp mode), 800 kSPS (normal mode) and 670 kSPS (pulse mode).

This document describes the features and characteristics of the 16-bit, 750 kSPS, unipolar/bipolar programmable input PulSAR® ADC AD7612. It features multiple pins/software programmable input ranges, high throughput, 16-bit resolution, low INL, and high SNR, among others.

AD9230 is a 12-bit, 170 MSPS/210 MSPS/250 MSPS, 1.8 V Analog-to-Digital Converter with excellent linearity and low power consumption.

The AD7747 is a 24-bit capacitive-to-digital converter with temperature sensor. It provides a single-chip solution for single-ended or differential grounded sensors with up to 19.5-bit resolution. The device features 10 fF accuracy and 0.01% linearity. The AD7747 also provides 5 Hz to 45 Hz update rates, 50 Hz and 60 Hz simultaneous rejection, and a 0.1°C resolution and ±2°C accuracy temperature sensor.

The AD7693 is a 16-bit, ±0.5 LSB, 500 kSPS PulSAR® differential ADC in MSOP/QFN.

AD7631 is a 18-bit, 250 kSPS, differential programmable input PulSAR® ADC with multiple input ranges, 250 kSPS throughput, 18-bit resolution with no missing codes, 102.5 dB dynamic range, 101 dB SNR, -112 dB THD, iCMOS® process, 5 V internal reference, 5 V/3.3 V interface, SPI/QSPI™/MICROWIRE™/DSP compatible, Pb-free, 48-lead LQFP and 48-lead LFCSP (7 mm × 7 mm) package, suitable for process controls, high speed data acquisition, digital signal processing and other applications.

AD9868 is a low-cost 3.3V CMOS mixed-signal front end for broadband modems. It features a 10-bit DAC converter, 2x/4x interpolation filter, 200 MSPS DAC update rate, an integrated 17 dBm line driver with 19.5 dB gain control, a 10-bit, 80 MSPS, ADC converter, -12 dB to +48 dB low noise RxPGA (<3 nV/√Hz), a third-order programmable low-pass filter, a flexible digital data path interface, half- and full-duplex operation, pin compatibility with the AD9865, various power-down/reduction modes, an internal clock multiplier (PLL), and 2 auxiliary programmable clock outputs. It is suitable for broadband wireline networking.