ANALOG Manuals

The document describes the features and characteristics of the AD7708/AD7718 8-/10-Channel, Low Voltage, Low Power, 24-Bit ADCs.

The AD8203 is a single-supply difference amplifier for amplifying and low-pass filtering small differential voltages in the presence of a large common-mode voltage (CMV). The input CMV range extends from -6 V to +30 V at a typical supply voltage of 5 V. The AD8203 is available in die and packaged for use in a variety of applications, such as transmission control, diesel injection control, engine management, adaptive suspension control, and vehicle dynamics control.

REF19x series precision micropower low dropout voltage reference

The AD526 is a single-ended, monolithic software programmable gain amplifier (SPGA) that provides gains of 1, 2, 4, 8, and 16. It is complete, including amplifier, resistor network, and TTL-compatible latched inputs, and requires no external components. Low gain error and low nonlinearity make the AD526 ideal for precision instrumentation applications requiring programmable gain. The small signal bandwidth is 350 kHz at a gain of 16. In addition, the AD526 provides excellent dc precision. The FET-input stage results in a low bias current of 50 pA.

Blackfin and the Blackfin logo are registered trademarks of Analog Devices, Inc. The Blackfin Embedded Processor ADSP-BF538/ADSP-BF538F Rev. 0 is provided by Analog Devices. The processor features high performance, multiple MAC and ALU units, a RISC-like register and instruction model for ease of programming, and advanced debugging, tracing, and performance monitoring capabilities.

AD5627R/AD5647R/AD5667R is a low power dual nanoDAC with 12-bit/14-bit/16-bit resolution, built-in 1.25V/2.5V, 5ppm/°C reference voltage, external reference voltage is also supported, operating voltage is 2.7V to 5.5V, ensures the design monotonicity, power-on reset to zero scale, each channel can be independently shut down, with hardware LDAC and CLR functions, I2C-compatible serial interface supports standard (100kHz), fast (400kHz) and high speed (3.4MHz) modes, can be applied to process control, data acquisition systems, portable battery powered instruments and other occasions.

The AD5204/AD5206 is a 4/6-channel digital potentiometer with 256 positions and independent programming. It can replace mechanical potentiometers and has features such as 10kΩ, 50kΩ, 100kΩ, 3-wire SPI-compatible serial data input, +2.7V to +5.5V single supply, -2.7V dual supply, power ON midscale preset.

AD5426/AD5432/AD5443 is a high bandwidth 8-bit, 10-bit and 12-bit multiplying DAC with serial interface

AD9411 is a 10-bit, 170/200 MS/s 3.3V A/D converter with excellent linearity and low power consumption, suitable for wireless and wired broadband communications, cable reverse path, communication test equipment, radar and satellite subsystems, etc.

AD5390/AD5391/AD5392 are 8/16-channel, 3 V/5 V, serial input, single-supply, 12/14-bit voltage output DACs from Analog Devices. AD5390 is a 16-channel, 14-bit voltage output DAC, AD5391 is a 16-channel, 12-bit voltage output DAC, and AD5392 is an 8-channel, 14-bit voltage output DAC. These devices feature guaranteed monotonicity, output voltage range of ±1 V to +5 V, and a temperature range of -40°C to +85°C.

This document is ADG3304 datasheet, which introduces the function, characteristics, application scenarios of ADG3304.

The ADT7470 is a multi-channel temperature sensor and fan controller that can monitor up to 10 remote temperature sensors and independently monitor and control the speed of up to 4 fans. PWM outputs drive each fan under software control. FULL_SPEED input allows fans to be blasted PWMMAX by external hardware. SMBALERT interrupt signals failures to system controller. Three-state ADDR pin allows up to 3 devices on a single bus. Temperature decoder interprets TMP05/TMP06 temperature sensors and communicates values over I2C bus. Supports fast I2C standard (max 400 kHz). Meets SMBus 2.0 electrical specifications (fully SMBus 1.1-compliant). Footprint-compatible with ADT7460. Applications include servers, networking and telecommunications equipment, and desktops.

AD7701 is a 16-bit ADC from AD company, with 0.0015% linearity error, 0.1Hz to 10Hz programmable low-pass filter, 0V to +2.5V or -2.5V analog input range, 4kSPS output data rate, flexible serial interface, ultralow power

The AD8221 precision instrumentation amplifier is an easy-to-use instrumentation amplifier with a gain range of 1 to 1000, available in a space-saving MSOP package. It offers excellent AC specifications, low noise, and high accuracy dc performance.

This datasheet provides detailed information on the features and specifications of the AD7824/AD7828, including the operating principles, pin functions, electrical characteristics and application examples.