ANALOG Manuals

AD5259 is a 256-bit digital potentiometer with passive storage.

AD9869 is a low cost 3.3 V CMOS MxFE for broadband modems. It features a 12-bit DAC converter, 2×/4× interpolation filter, 200 MSPS DAC update rate, an integrated 17 dBm line driver with 19.5 dB gain control, a 12-bit, 80 MSPS, ADC converter, -12 dB to +48 dB low noise RxPGA (<3 nV/√Hz), third-order programmable low-pass filter, flexible digital data path interface, half- and full-duplex operation, pin compatible with the AD9866, various power-down/reduction modes, internal clock multiplier (PLL), 2 auxiliary programmable clock outputs, and available in a 64-lead LFCSP_VQ package.

The ADM1021A1 is a two-channel digital thermometer and undertemperature/overtemperature alarm, intended for use in personal computers and other systems requiring thermal monitoring and management. The device integrates a temperature sensor on-chip, eliminating the need for an external temperature sensor. The ADM1021A1 uses a 2-wire SMBus serial interface and supports system management bus (SMBus) alert.

AD7822/AD7825/AD7829 is a 3 V/5 V, 2 MSPS, 8-bit, 1-, 4-, 8-channel sampling ADC

Introduce the basic information of Blackfin USB-LAN EZ-Extender, including brand, model, functional characteristics, etc.

The AD623 is a low cost instrumentation amplifier from Analog Devices. It is easy to use and offers higher performance than discrete designs. It supports single/dual supply operation and has a rail-to-rail output swing. The input voltage range extends below ground by 150 mV (single supply). The device is low power, with a maximum supply current of 575 µA. Gain can be set with one external resistor, with a gain range of 1 (no resistor) to 1,000. The AD623 has high accuracy DC performance, with 0.1% gain accuracy (G = 1), 0.35% gain accuracy (G > 1), 25 ppm gain drift (G = 1), 200 µV maximum input offset voltage (AD623A), 2 µV/°C maximum input offset drift (AD623A), 100 µV maximum input offset voltage (AD623B), 1 µV/°C maximum input offset drift (AD623B) and 25 nA maximum input bias current.

The AMP03 is a precision, unity-gain differential amplifier from Analog Devices. It features high CMRR, low nonlinearity, low distortion, wide bandwidth, fast slew rate, and fast settling time, making it suitable for a wide variety of applications.

This document provides detailed information about ADR420/ADR421/ADR423/ADR425, including features, characteristics, applications and so on.

ADM1063 Rev. 0 is a multisupply supervisor/sequencer with ADC and temperature monitoring. It provides a complete supervisory and sequencing solution for up to 10 supplies, enabling supervision with better than 1% accuracy. It also features various input and output functions that can be configured and controlled as needed.

The AD5751 is a single-channel, low-cost, high-precision industrial I/V output driver that operates from a single supply voltage up to 55 V and provides programmable voltage and current output ranges.

AD8036/AD8037 have large-signal bandwidths and ultralow distortion. The AD8036 achieves –66 dBc at 20 MHz, and has small-signal and large-signal bandwidths of 240 MHz and 195 MHz, respectively. The AD8036/AD8037 are ideal for driving and buffering flash and high resolution ADCs. The input clamp architecture supports the clamp levels as additional inputs to the amplifier. Due to these clamp characteristics, the AD8036 and AD8037 can be used in nontraditional applications such as a full-wave rectifier, a pulse generator, or an amplitude modulator.

AD7226 is an 8-bit D/A converter produced by Analog Devices. This converter has high accuracy, low power consumption, programmable, full speed, and is suitable for various applications.

The SSM2018T is a professional audio quality VCA designed for high performance volume control systems. It features a 117 dB dynamic range, 0.006% typical THD+N, 140 dB gain range, and more.

AD5301/AD5311/AD5321 are buffered voltage output 8/10/12-bit DACs from Analog Devices. They support 2.5 V to 5.5 V power supply, operate at 120 mA current, offer I2C®-compatible serial interface, provide data readback capability, have guaranteed monotonicity, low power, power supply derived reference, power-on reset to 0 V, on-chip rail-to-rail output buffer amplifier, and three power-down functions.

The ADP5022 is a small, high performance, 3 MHz, 600 mA buck regulator with integrated 150 mA low dropout (LDO) regulator