ANALOG Manuals

The ADM3493 is a low power, differential line transceiver designed to operate using a single 3.3 V power supply. It supports EIA RS-422 and RS-485 standards, data rate is 250 kbps, and supports up to 256 transceivers connected.

The ADM3493 is a low power, differential line transceiver designed to operate using a single 3.3 V power supply. It is compliant with EIA RS-422 and RS-485 standards, and has a data rate of 250 kbps. The device is available in an 8-lead SOIC package and can be used in low power RS-485 applications, EMI sensitive systems, DTE-DCE interfaces, industrial control, packet switching, local area networks and level translators.

This document describes the features and characteristics of the low-cost, voltage output, high-side current-sense amplifier ADM4073. It features three available gain versions (20 V/V, 50 V/V, 100 V/V), typical ±1.0% full-scale accuracy, 500μA supply current, wide 1.8 MHz bandwidth, 3V to 28V operating supply, wide 2V to 28V common-mode range, independent of supply voltage, -40°C to +125°C operating temperature range, and compatibility with MAX4073 in a 6-lead SOT-23 package. The ADM4073 is suitable for applications such as cell phones, PDAs, notebook computers, portable/battery-powered systems, smart battery packs/chargers, automotive, power management systems, PA bias control, general system/board-level current monitoring, and precision current sources.

The ADM4210 is a hot swap controller that safely enables a printed circuit board to be removed and inserted to a live backplane. It supports 2.7V-16.5V voltage range and features overcurrent protection and short circuit protection.

ADM4210 is a hot swap controller that safely enables a printed circuit board to be removed and inserted to a live backplane. It features supply voltage control, current limit, fault protection, etc.

This is a 5V low-power, slew-rate-limited RS-485/RS-422 transceiver with the following features: Complies with EIA RS-485/RS-422 standards, data rates up to 250kbps, slew-rate limited design for low EMI, supply current of only 100nA in shutdown mode, low power consumption (120µA), up to 32 transceivers can be connected on one bus, outputs high-z when disabled or powered off, -7V to +12V bus common-mode range, thermal shutdown and short-circuit protection, pin-compatible with MAX483, -40°C to +85°C temperature range, 8-lead SOIC package.

The ADM483 is a low power differential line transceiver suitable for low power RS-485 applications. It has a low power consumption of 120µA and a supply current of 100nA in shutdown mode.

This document describes the features and characteristics of the ADM483 low power differential line transceiver, including compliance with the EIA RS-485/RS-422 standard, data rates up to 250 kbps, low electromagnetic interference, and low power consumption. The product is suitable for low power RS-485 applications, EMI sensitive systems, DTE-DCE interfaces, industrial control, etc.

The ADM202E and ADM1181A are high-speed, 2-channel RS-232/V.28 interface devices that operate from a single 5 V power supply. Both products are suitable for operation in harsh electrical environments and are compliant with the EU directive on EMC (89/336/EEC). The products feature low electromagnetic emissions and ESD protection.

The ADM202E and ADM1181A are robust, high speed, 2-channel RS232/V.28 interfaces that incorporate CMOS inputs, outputs, voltage doublers, and voltage inverters. They feature EMI/EMC compliance and 15 kV ESD protection and operate over a voltage range of 5 V to 10 V.

ADM202E/ADM1181A are high-performance, 2-channel RS-232/V.28 interface devices that operate from a single 5V power supply. The products are suitable for operation in harsh electrical environments and comply with the EU EMC directive (89/336/EEC). Both the level of electromagnetic emissions and the ESD protection are low.

The document introduces the ADM202/ADM203, which is a high-speed, +5 V, 0.1 �F CMOS RS-232 driver/receiver pair. It features single supply +5 V operation, high efficiency, and +5 V to +10 V voltage doubler.