ANALOG Manuals

The ADG3246 is a 2.5 V or 3.3 V, 10-Bit, 2-Port Level Translating, Bus Switch designed on Analog Devices' low voltage CMOS process, which provides low power dissipation yet gives high switching speed and very low on resistance, allowing inputs to be connected to outputs without external pull-up resistors.

The ADG3245 is a 2.5 V/3.3 V, 8-bit, 2-port digital switch. It is designed on Analog Devices’ low voltage CMOS process, which provides low power dissipation yet gives high switching speed and very low on resistance, allowing inputs to be connected to outputs.

ADG3257 is a CMOS bus switch comprised of four 2:1 multiplexers/demultiplexers with high impedance outputs. The device is manufactured on a CMOS process. This provides low power dissipation yet high switching speed and very low parasitic capacitance.

The ADG3304 is a low-voltage, 1.15 V to 5.5 V, 4-channel, bidirectional logic level translator. It can be used in multivoltage digital system applications, such as data transfer, between a low voltage and a high voltage device.

The ADG3301 is a single-channel, bidirectional logic level translator that can be used in multi-voltage digital system applications such as data transfer between a low voltage DSP/controller and a higher voltage device.

The ADG3233 is a bidirectional logic level translator with a operating voltage range of 1.65V to 3.6V, and it features a bypass switch.

ADG3232 is a low voltage 2-1 mux, which provides bidirectional level translation, the working voltage range is 1.65V to 3.6V, and it is manufactured by sub-micron process and packaged in 8-pin SOT-23. It has short circuit protection and is compatible with LVTTL/CMOS

The ADG3231 is a single-channel level translator designed on a submicron process that is guaranteed to operate over the 1.65 V to 3.6 V supply range. The device can be used in applications requiring communication between digital devices operating from multiple supply voltages. The logic levels on each side of the device are set by the two supply voltages, VCC1 for A and VCC2 for Y. The signal path is unidirectional and can be used for up/down level translation.

The ADG3123 is an 8-channel CMOS to high voltage level translator, featuring a 2.3V to 5.5V input voltage range, low output voltage levels down to -24.4V, and high output voltage levels up to +35V.

The AD7400 is an isolated Sigma-Delta modulator with features such as a 10 MHz clock rate, 16 bits, ±2 LSB INL typical, and a maximum offset drift of 3.5 μV/°C.

The AD7401 is a second-order, high-precision sigma-delta modulator with 16-bit accuracy, on-chip digital isolation, and low power consumption. The device utilizes Analog Devices' proprietary Σ-Δ modulator technology to convert an analog input signal into a high-precision, high-speed, single-bit digital data stream. The AD7401 is suitable for AC motor control, data acquisition systems, and A/D isolation replacements.

The AD7400A1 is a second-order Σ-Δ modulator from Analog Devices that offers 16-bit resolution, 10 MHz clock rate, ±2LSB INL, 1.5μV/°C typical offset drift, low power consumption, etc.

The AD7401A is a second-order Σ-Δ converter with a digital isolator, a conversion rate of 20 MHz, 16-bit accuracy and no missing codes. The operating voltage range of the AD7401A is 2.7 V to 5.5 V, and the operating temperature range is -40°C to +125°C. The AD7401A is packaged in a 16-lead SOIC package.

ADM3251E Rev. F is an isolated, single-channel RS-232 line driver/receiver. It features 2.5 kV isolation (power and data), 460 kbps data rate, compliance with EIA/TIA-232E specifications, high common-mode transient immunity, etc.

ADM2483 is a half-duplex, iCoupler® isolated RS-485 transceiver that complies with ANSI TIA/EIA RS-485-A and ISO 8482: 1987(E) standards, with a data rate of 500 kbps, slew rate-limited driver outputs, low power operation with a current of up to 2.5 mA, suitable for 5 V or 3 V operation (VDD1), high common-mode transient immunity (>25 kV/μs), true fail-safe receiver inputs, chatter-free power-up/power-down protection, 256 nodes on the bus, and thermal shutdown protection.