ANALOG Manuals

This datasheet provides the functional block diagrams, pin diagrams, electrical characteristics, application examples, etc. of ADM202/ADM203.

This is a RS-232 serial port driver/receiver produced by Analog Devices. It features ultra-low power consumption and high compatibility. It operates with a voltage range of 3V to 3.6V and is suitable for notebooks, peripherals, modems, printers and other devices.

This document is the technical manual for 0.1μF, 5V Powered CMOS RS-232 Drivers/Receivers ADM206/ADM207/ADM208/ADM211/ADM213. It introduces the features of the product, including capacitor range, data rate, receiver number, power supply range, power consumption, standby power consumption, receiver input levels, etc.

This document is about ADM202E/ADM1181A product, it is a RS-232 interface device that complies with the EU directive on EMC (89/336/EEC), and it has ±15 kV ESD protection and supports 230 kbits/s data rate

ADM3202/ADM3222/ADM1385 are high speed, 2 channel RS-232/V.28 interface devices that operate from a single 3.3 V power supply. Low power consumption and a shutdown facility (ADM3222/ADM1385) make them ideal for battery-powered portable instruments.

ADM206E/ADM207E/ADM208E/ADM211E/ADM213E are ±15 kV ESD-Protected, RS-232 Line Drivers/Receivers that comply with the 89/336/EEC EMC directive

ADM101E is a tiny RS-232 transceiver designed for portable applications. It features a transmission rate of 460 kbit/s and is compatible with RS-232 input/output levels. The transceiver operates from a single 5V power supply and includes one driver and one receiver. It also incorporates an on-board DC-DC converter, eliminating the need for a negative power supply. The ADM101E is low power and has an ultralow power shutdown mode. It is suitable for mobile telephones, palmtop computers, PDAs, portable instrumentation, and GPS receivers.

The ADM2209E is a dual RS-232 port transceiver with ESD protection and standby.

This document introduces the features and characteristics of the ADM3307E/ADM3310E/ADM3311E/ADM3312E/ADM3315E series of products. This series of products are 2.7 V to 3.6 V power supply serial port transceivers with Green Idle low power mode, single power supply, 3 V logic, 0.1 μF to 1 μF charge pump capacitors, low EMI, low power shutdown: 20 nA, full RS-232 compliance, 460 kb/s data rate, one receiver active in shutdown (ADM3307E/ADM3311E/ADM3312E/ADM3315E), two receivers active in shutdown (ADM3310E), ESD>15 kV IEC 1000-4-2 on RS-232 I/Os, ESD>15 kV IEC 1000-4-2 on CMOS and RS-232 I/Os (ADM3307E).

ADM3232E is a 3.3 V RS-232 line driver/receiver with ±15 kV ESD protection. It meets EIA-232E specifications and has a data rate of 460 kbps. The product is suitable for general-purpose RS-232 data links, portable instruments, handsets, industrial/telecom diagnostic ports, and other applications.

The ADP5589 is a keypad decoder and I/O expander from Analog Devices (ADI). It supports a 16-element FIFO for event recording and has 19 configurable I/Os that can be used for keypad decoding, key press/release interrupts, key pad lock/unlock, GPIO functions, etc.

The ADP5588 is an I/O port expander and keypad matrix designed for QWERTY type phones that require a large keypad matrix and expanded I/O lines. It features 18 GPIO port expander or 10 × 8 keypad matrix, configurable to GPIs, GPOs, and keypad rows or columns. It also has dual light sensor inputs, I2C interface, configurable pull-ups, and more.

The ADP5587 is an I/O port expander and keypad matrix designed for QWERTY phones that require a large keypad matrix and expanded I/O lines. It features 18 GPIOs, 10×8 keypad matrix, I2C interface with auto-increment, 1.65V to 3.6V operation, keypad lock capability, open-drain interrupt output, key press and key release interrupts, GPI interrupt with level programmability, programmable pull-ups, key event counter with overflow interrupt, 275 μs debounce on the reset line and GPIs, 1 μA typical idle current, 55 μA typical polling current, 4 mm × 4 mm LFCSP package, small 2 mm x 2 mm WLCSP package, 0.4 mm pitch, multiple I2C addresses available for the LFCSP package to allow multiple port expanders on the same bus.

ADP5585 is a programmable logic block with 16 I/O for keypad decoding, GPIO, PWM generation, I2C interface, etc.

This document describes the features and characteristics of the ADN4690E/ADN4692E/ADN4694E/ADN4695E series high-speed M-LVDS transceivers, including a working voltage of 3.3V, support for half-duplex and full-duplex modes, support for data transfer rates of 100Mbps, compliance with the TIA/EIA-899 standard, and features such as interference resistance and ESD protection.