ANALOG Manuals

The AD8041 is a 160MHz rail-to-rail amplifier with a wide range of power supply options and low power consumption. It can achieve rail-to-rail output swing and the input voltage range extends 200mV below ground. The amplifier has fast response speed and high slew rate, making it suitable for power-sensitive high-speed systems and video applications.

SigmaDSP® 28-/56-Bit Audio Processor with Two ADCs and Four DACs. Features include complete standalone operation, self-boot from serial EEPROM, auxiliary ADC with 4-input mux for analog control, GPIOs for digital controls and outputs, fully programmable with SigmaStudio™ graphical tool, etc.

The AD7933/AD7934 are 12-bit and 10-bit, high speed, low power, successive approximation (SAR) ADCs. The parts operate from a single 2.7 V to 5.25 V power supply and feature 4 analog input channels, an on-chip 2.5 V reference, and 70 dB SINAD with a maximum 2 µA shutdown mode.

The AD7622 is a 2 MSPS SAR ADC with 16-bit resolution and 1.5 LSB INL.

This document introduces the features of ADuC836 MicroConverter ® Dual 16-Bit μ-p ADCs with Embedded 62 kB Flash MCU.

The AD679 is a 14-bit 128 kSPS ADC that integrates a high-speed sample-and-hold amplifier (SHA), ADC, 5 V reference, clock, and digital interface on a single chip. It provides a fully specified sampling A/D function that is unattainable with discrete designs. It features a conversion rate of 128k conversions per second, a full power bandwidth of 1 MHz, a full linear bandwidth of 500 kHz, and a 78 dB S/N+D ratio. The AD679 uses twos complement data format (bipolar mode) and straight binary data format (unipolar mode), has a 10MΩ input impedance, supports 8-bit bus interface, on-board reference and clock, an input range of 10V unipolar or bipolar, and is pin compatible with the AD678 12-bit 200 kSPS ADC. It also offers versions that comply with MIL-STD-883.

The AD7671 is a 16-bit, 1 MSPS CMOS ADC with high precision and low power consumption.

This document describes a multichannel ISM band FSK/GFSK/OOK/GOOK/ASK transmitter ADF7012 Rev. 0. The product is a single-chip, low power UHF transmitter that operates in the frequency range of 75 MHz to 1 GHz. It supports multichannel operation using Frac-N PLL technology. The operating voltage range is 2.3 V to 3.6 V. It has programmable output power, data rates, and low current consumption. It is suitable for applications such as low-cost wireless data transfer, security systems, RF remote controls, wireless metering, and secure keyless entry.

The ADG1221/ADG1222/ADG1223 are low-static-current, low-leakage iCMOS dual SPST switches with a ±15V/+12V supply range, 3V logic-compatible inputs, a switch resistance of 120Ω, a switch capacitance of 2pF, a switch leakage of 20pA, and a 10-lead MSOP package.

The AD7893 is a fast 12-bit, 6 µs ADC from Analog Devices that operates from a single +5 V supply and is housed in a small 8-pin mini-DIP and 8-pin SOIC. The part contains a 6 µs successive approximation A/D converter, an on-chip track/hold amplifier, an on-chip clock and a high speed serial interface. Output data from the AD7893 is provided via a high speed, serial interface port. This two-wire serial interface has a serial clock input and a serial data output with the external serial clock accessing the serial data from the part. In addition to traditional dc accuracy specifications such as lin- earity, full scale accuracy, and offset, the AD7893 also offers improved performance in terms of noise and distortion.

The AD7492 is a 12-bit high-speed, low-power successive-approximation ADC. The device operates from a single 2.7 V to 5.25 V power supply and supports throughput rates up to 1.25 MSPS. The AD7492 contains a low-noise, wide bandwidth 2.5 V internal reference and on-chip clock oscillator. It also features flexible power/throughput rate management and no pipeline delays. The AD7492 is ideal for a variety of high-precision measurement applications.

The AD8561 is a single 7 ns comparator with separate input and output sections. Separate supplies enable the input stage to be operated from ±5 V dual supplies and +5 V single supplies. Fast 7 ns propagation delay makes the AD8561 a good choice for timing circuits and line receivers. Propagation delays for rising and falling signals are closely matched and track over temperature. This matched delay makes the AD8561 a good choice for clock recovery, since the duty cycle of the output will match the duty cycle of the input. The AD8561 has the same pin configuration as the AD8562 and AD8563 and comes in the same packages.

AD7329 is a 1 MSPS, 8-channel, software-selectable, true bipolar input, 12-bit plus sign ADC

This datasheet provides detailed information about ADM206E/ADM207E/ADM208E/ADM211E/ADM213E products, including product functions, features, specifications, etc.