Key facts
- Manuals
- 20
- Models
- 1
- Languages
- EN · IT · FR
- Last added
- 2026-11-01
Xylem models by category
Featured Xylem manuals

Xylem Hydrovar Fifth Generation Speed Control Quick-Start Guide
This guide explains how to configure the Hydrovar Fifth Generation for speed control using analog inputs. It details wiring for 4-20mA, 0-10VDC, and 0-20mA signals on terminals X1/5 and X1/6. It also covers parameter settings for different software versions, including password access and sensor configuration. The guide assumes the device is in Actuator mode for direct control via analog input.
The document includes setup steps for versions 2.00–2.10 and 2.20+, specifying parameter adjustments for required value control and sensor range mapping. It provides terminal connection diagrams and notes on compatibility with external control devices.
Covers: Speed Control via Analog Input · Wiring Instructions for 4-20mA, 0-10VDC, 0-20mA · Parameter Settings for Software Versions 2.00–2.10 · Parameter Settings for Software Versions 2.20+ · Actuator Mode Configuration

Xylem Brazed Plate Heat Exchangers Installation, Operation, and Maintenance Manual
This manual provides step-by-step instructions for installing, operating, and maintaining Xylem brazed plate heat exchangers. It includes safety warnings, product warranty details, and guidelines for piping, mounting, and startup procedures. The document also specifies torque limits for connections and mounting bolts for various models.
Safety precautions are emphasized throughout, including the use of protective gear, avoiding modifications, and ensuring proper fluid handling to prevent injury or equipment damage.
Covers: Introduction and Safety · Product Warranty · Product Description · Installation · Operation · Maintenance

Xylem Moisture Sensor Relay Installation and Operation Manual for Models 9K583, 9K584, and 9K585
The document serves as an installation and operation guide for the Xylem Moisture Sensor Relay. It details safety instructions regarding electrical grounding and code compliance before connecting the device to pump controllers.
The manual provides specific wiring diagrams and connection steps for integrating the sensor with multiple controller models, including Aquavar SOLO/SOLO2, AB2, S-Drive, SPD, e-SM Smart Motor, IPC, and Hydrovar. It covers single sensor connections as well as configurations for connecting two sensors in series.
Covers: Safety Instructions · Specifications · Connections to Aquavar SOLO and SOLO2 · Connections to S-Drive and SPD · Connections to Aquavar AB2 · Connections to e-SM Smart Motor

Xylem IM280R01 e-AB2 Packages Aquavar IPC Start-Up Guide
This guide details the factory-default setup for the Aquavar IPC controller used in e-AB2 booster packages. It includes motor characteristics, pressure settings, and wiring instructions. Users are instructed to verify motor rotation and adjust pressure if needed. The guide also covers duplex operation and pump protect functions, with references to additional documentation for advanced programming.
Covers: Factory Preset Conditions · Pressure Settings · Motor Rotation Check · Duplex Operation · Pump Protect Function · Wiring Configuration
Latest Xylem manuals
Xylem Hydrovar Fifth Generation Speed Control Quick-Start Guide
Quick Start Guide 4 pages · 914 KB · ENQuick-start guide for configuring Xylem Hydrovar Fifth Generation for speed control using analog inputs from PLC, BMS, or potentiometers.
Xylem Brazed Plate Heat Exchangers Installation, Operation, and Maintenance Manual
User Manual 11 pages · 252 KB · ENManual for installing, operating, and maintaining Xylem brazed plate heat exchangers with safety guidelines and torque specifications.
Xylem Moisture Sensor Relay Installation and Operation Manual for Models 9K583, 9K584, and 9K585
Installation Guide 8 pages · 3.3 MB · ENThis manual provides installation and operation instructions for Xylem Moisture Sensor Relays (models 9K583, 9K584, and 9K585) compatible with various…
Xylem IM280R01 e-AB2 Packages Aquavar IPC Start-Up Guide
User Manual 1 pages · 365 KB · ENStart-up guide for Xylem's e-AB2 Aquavar IPC controller, covering factory presets, pressure settings, motor rotation checks, and duplex operation.
Xylem IM321 e-SH Close Coupled End Suction Pump User Manual
User Manual 21 pages · 257 KB · ENUser manual for Xylem's IM321 e-SH close-coupled end suction pump, covering installation, operation, maintenance, and safety.
Xylem HSC³ Base Mounted Centrifugal Pump Instruction Manual
User Manual 51 pages · 4.2 MB · ENComprehensive guide for installing, operating, and maintaining Xylem HSC³ base-mounted centrifugal pumps with safety and maintenance instructions.
Xylem DOMO, DOMO GRI Submersible Pump Installation, Use and Maintenance Manual
Installation Guide 34 pages · 1.1 MB · ITInstallation, operation and maintenance guide for Xylem's DOMO and DOMO GRI submersible pumps.
Xylem DOMO, DOMO GRI Submersible Pump Units Installation, Operation and Maintenance Manual
User Manual 34 pages · 1.8 MB · ENInstallation, operation and maintenance guide for Xylem's DOMO and DOMO GRI submersible pump units.
Xylem DOMO DOMO GRI Submersible Pump Unit Installation, Operation and Maintenance Manual
User Manual 34 pages · 1.8 MB · FRInstallation, operation and maintenance guide for Xylem's DOMO and DOMO GRI submersible pump units.
Xylem Multi 3630 IDS Digital Meter Operating Manual
User Manual 117 pages · 722 KB · ENOperating manual for the Xylem Multi 3630 IDS digital meter, covering pH, ORP, dissolved oxygen, conductivity, and turbidity measurements.
Xylem Turb 430 IR/T Handheld Turbidimeter Operating Manual
User Manual 68 pages · 888 KB · ENThis operating manual covers the commissioning, operation, maintenance, and technical specifications of the Xylem Turb 430 IR/T handheld turbidimeter.
Xylem MIQ/JB Branching Module Operating Manual
User Manual 16 pages · 297 KB · ENThis operating manual covers the installation, maintenance, and technical specifications of the Xylem MIQ/JB branching module for the IQ SENSOR NET system.
Xylem e-MPV Vertical Multistage Pump Instruction Manual
User Manual 38 pages · 2.8 MB · ENThis instruction manual covers the installation, operation, maintenance, and troubleshooting of the Xylem e-MPV Vertical Multistage Pump.
Xylem IM321 Model e-SH Close Coupled & Frame Mounted End Suction Pumps Instruction Manual
User Manual 20 pages · 1.1 MB · ENInstruction manual for the Xylem IM321 Model e-SH close coupled and frame mounted end suction pumps, covering installation, operation, maintenance, and…
Xylem Sump and Effluent Pump Instruction Manual
User Manual 20 pages · 212 KB · ENThis manual provides installation, operation, and maintenance instructions for Xylem sump and effluent pumps including model GSP0311 and GSP0511.
Which document do I need?
Quick Start Guide
The shortest path to a working setup, usually only a few pages.
User Manual
Day-to-day operation, settings and troubleshooting. Start here if the product is already set up.
Installation Guide
Mounting, wiring and first power-up. Read it before the hardware goes in.
Questions answered in Xylem manuals
How do I wire a 4-20mA signal to the Hydrovar?
Wire the 4-20mA signal to X1 Terminal #5 and common to Terminal #6.
From: Xylem Hydrovar Fifth Generation Speed Control Quick-Start Guide
What is the password to unlock the extended menu?
Enter the password “66666666” and hold the □ button for 3 seconds.
From: Xylem Hydrovar Fifth Generation Speed Control Quick-Start Guide
What is the purpose of this manual?
To provide necessary information for installation, operation, and maintenance.
From: Xylem Brazed Plate Heat Exchangers Installation, Operation, and Maintenance Manual
What safety precaution must be followed before handling the product?
You must observe the instructions contained in this manual.
From: Xylem Brazed Plate Heat Exchangers Installation, Operation, and Maintenance Manual
What are the wire colors for the Moisture Sensor Relay?
The Red and Black wires power the switch, while the White and Green wires serve as the relay output.
From: Xylem Moisture Sensor Relay Installation and Operation Manual for Models 9K583, 9K584, and 9K585
How do I connect two moisture sensors in series?
Connect the green wire from sensor 1 to the white wire of sensor 2, then connect both sensors' black/red wires to the transducer terminal.
From: Xylem Moisture Sensor Relay Installation and Operation Manual for Models 9K583, 9K584, and 9K585
