TEXAS Manuals (Industrial)

File format: PDF Size:0 KB

File format: PDF Size:0 KB

TMS28F010A is a 1048576-bit programmable read-only memory that can be electrically bulk-erased and reprogrammed. It has pin compatibility with existing 1-megabit EPROMs and all inputs/outputs are TTL compatible. It features an industry-standard programming algorithm and low power dissipation. It is available in different endurance cycle versions and temperature range options. Suitable for automotive temperature range.

File format: PDF Size:304 KB

The document describes a single-chip solution that directly measures eight low-level currents. The solution features high precision true integrating function with integral linearity of ±0.01% of Reading ±0.5ppm of FSR, very low noise of 5.2ppm of FSR, low power consumption of 13.5mW/channel, adjustable data rate up to 3.125kSPS, and programmable full scale. It is suitable for applications such as CT scanners DAS, photodiode sensors, infrared pyrometers, liquid/gas chromatography.

File format: PDF Size:380 KB

This document introduces the features and characteristics of the TLC08x series, including wide bandwidth, high output drive capability, high slew rate, wide power range, low power shutdown mode, low input noise voltage, input offset voltage, etc.

File format: PDF Size:1451 KB

The VSP3200 and VSP3210 are complete CCD image processors that operate from single +5V supplies. This complete image processor includes three Correlated Double Samplers (CDSs) and Programmable Gain Amplifiers (PGAs) to process CCD signals. The VSP3200 is interface compatible with the VSP3210, which is a 16-bit, one-chip product. The VSP3210 is pin-to-pin compatible with VSP3100, when in demultiplexed output mode. The VSP3200 and VSP3210 can be operated from 0°C to +85°C, and are available in LQFP-48 packages.

File format: PDF Size:340 KB

CY54FCT841T, CY74FCT841T 10-BIT LATCHES WITH 3-STATE OUTPUTS is a high-performance buffer with a logic voltage of 3.3V, which can provide high capacitance load driving capability and low capacitance bus loading at both input and output ends.

File format: PDF Size:152 KB

This document introduces the features and characteristics of CDCU877

File format: PDF Size:411 KB

The 'HC85 and 'HCT85 are high speed magnitude comparators that use silicon-gate CMOS technology to achieve operating speeds similar to LSTTL with the low power consumption of standard CMOS integrated circuits. These 4-bit devices compare two binary, BCD, or other monotonic codes and present the three possible magnitude results at the outputs (A > B, A < B, and A = B). The 4-bit input words are weighted (A0 to A3 and B0 to B3), where A3 and B3 are the most significant bits. The devices are expandable without external gating, in both serial and parallel fashion. The upper input terminals (A0 to A3) have buffered inputs, while the lower input terminals (B0 to B3) have unbuffered inputs.

File format: PDF Size:365 KB

File format: PDF Size:0 KB

bq29410/11/12 is a secondary overvoltage protection IC for 2-, 3-, or 4-cell lithium-ion battery packs from TI. It incorporates a high-accuracy precision overvoltage detection circuit and a programmable delay circuit for overvoltage detection time.

File format: PDF Size:228 KB

The µA7800 series of positive-voltage regulators is a three-terminal regulator with high power dissipation capability, output current up to 1.5 A, internal thermal overload protection, internal short circuit current limiting and output transistor safe-area compensation.

File format: PDF Size:356 KB

TRF1223 is a power amplifier chip from Texas Instruments. It works in the frequency range of 3.3-3.8GHz and has an output power of 1W. It has 16dB of gain steps and 1-bit TTL control signals, which can achieve a total gain control of 32dB.

File format: PDF Size:125 KB

File format: PDF Size:0 KB

TPS2830, TPS2831 are fast synchronous-buck MOSFET drivers with deadtime control. These devices are ideal for designing high-performance power supplies using a switching controller that does not include suitable MOSFET drivers on the chip. The drivers are designed to deliver 2.4A peak currents into large capacitive loads. Higher currents can be controlled by using multiple drivers in a multiphase configuration. The high-side driver can be configured as a ground-reference driver or as a floating bootstrap driver. An adaptive dead-time control circuit eliminates shoot-through currents through the main power FETs during switching transitions, and provides high efficiency for the buck regulator. The TPS2830/31 drivers have additional control functions: ENABLE, SYNC, and CROWBAR.

File format: PDF Size:200 KB

This is a brochure about the C64x series of digital signal processors (DSPs).

File format: PDF Size:1989 KB

This datasheet is for the TLV1117

File format: PDF Size:495 KB

TLE214x/A is a dual-channel, low-noise, high gain amplifier with 10kHz low noise and 27V/μs low distortion

File format: PDF Size:1286 KB

The TLC272 and TLC277 are precision dual operational amplifiers that combine a wide range of input offset voltage grades with low offset voltage drift, high input impedance, low noise, and speeds approaching that of general-purpose BiFET devices.

File format: PDF Size:551 KB

The THS3092/6 are a series of high voltage, low distortion, high speed, current feedback operational amplifiers from TI. The devices feature a wide supply range, low distortion, and high current output capability, making them ideal for applications such as power FETs, VDSL line drivers, and more.

File format: PDF Size:1537 KB