ST Manuals (Industrial)

TDA2005 is a class B dual audio power amplifier produced by Texas Instruments. It uses MULTIWATT package and is specifically designed for car radio applications. The amplifier provides a high current capability (up to 3.5 A) and can drive very low impedance loads (down to 1.6Ω).

File format: PDF Size:281 KB

TDA2005 is a 20W bridge amplifier for car radio, with high output power, high reliability, and flexibility.

File format: PDF Size:281 KB

The TDA2004A is a 10 + 10W stereo amplifier chip for car radios, known for its low distortion, low noise, and high reliability. It provides various protections against output AC short circuit, inductive loads, overrating chip temperature, load dump voltage surge, and fortuitous open ground. The chip is designed for car radio applications and can drive very low impedance loads. It features a MULTIWATT package that allows for a simple mounting system with no electrical isolation between the package and the heatsink, resulting in space and cost savings.

File format: PDF Size:172 KB

The TDA2004A is a 10+10W stereo amplifier designed for car radios. Its features include low distortion, low noise, high reliability and additional safety. The device is packaged in a multi-layer package for excellent space and cost savings.

File format: PDF Size:172 KB

The TDA2003 is a 10W car radio audio amplifier with improved performance and the same pin configuration as the TDA2002. It has a very low number of external components, ease of assembly, space and cost saving. The device provides a high output current capability (up to 3.5A) and very low harmonic and crossover distortion. Completely safe operation is guaranteed due to protection against DC and AC short circuit, thermal over-range, load dump voltage surge up to 40V, and fortuitous open ground.

File format: PDF Size:162 KB

TDA2003 is a car audio amplifier with high output current capability (up to 3.5A), very low harmonic and cross-over distortion, and completely safe operation.

File format: PDF Size:162 KB

The BTW67 / BTW69 Series is suitable in applications where power handling and power dissipation are critical, such as solid state relays, welding equipment, high power motor control. They offer superior performance in surge current handling capabilities thanks to their clip assembly technology. With their internal ceramic pad, they provide high voltage insulation (2500VRMS), complying with UL standards.

File format: PDF Size:95 KB

LM124W-LM224W-LM324W are low power quad operational amplifiers with a 1.3MHz wide gain bandwidth, 100dB gain, 375µA low power consumption, 20nA low input bias current, 3mV max input offset voltage, 2nA low input offset current.

File format: PDF Size:780 KB

This document describes a four-channel high-gain operational amplifier with wide gain bandwidth, large voltage gain, low supply current, low input bias current, low input offset voltage, and wide power supply range.

File format: PDF Size:780 KB

LM124-LM224-LM324 is a low power quad operational amplifier with wide gain bandwidth, input common-mode voltage range that includes ground, large voltage gain, very low supply current/amplifier, low input bias current, and input offset voltage. They can operate from both single power supply and dual power supply, and the supply current is independent of the magnitude of the power supply voltage.

File format: PDF Size:921 KB

LM124-LM224-LM324 is a low power quad operational amplifier from STMicroelectronics. It features a wide gain bandwidth of 1.3MHz, a large voltage gain of 100dB, a low supply current of 375μA, a low input bias current of 20nA, a maximum input offset voltage of 5mV and a maximum input offset current of 2nA.

File format: PDF Size:804 KB

LM124-LM224-LM324 are low power quad operational amplifiers. Their features are: bandwidth of 1.3 MHz, input common-mode voltage range includes ground, voltage gain of 100 dB, supply current per amplifier very low at 375 µA, input bias current of 20 nA, input offset voltage of 5 mV max. (For more accurate applications, use the equivalent parts LM124A-LM224A-LM324A which feature 3 mV max.), wide power supply range: single supply: +3 V to +30 V; dual supplies: ±1.5 V to ±15 V.

File format: PDF Size:804 KB

The TLPxxM/G/G-1 series are tripolar transient surge arrestors used for primary and secondary protectionin sensitivetelecom equipment.

File format: PDF Size:192 KB

The TLPxxM/G/G-1 series are bipolar transient surge arrestors used for primary and secondary protection in sensitive telecom equipment. The features include tripolar crowbar protection, voltage range selected for telecom applications, high repetitive peak pulse current, low holding current, low capacitance, and low leakage current.

File format: PDF Size:192 KB

TLPxxM/G/G-1 is a tripolar transient surge arrestor manufactured by ST Microelectronics. It is used for primary and secondary protection of sensitive telecom equipment. Its features include repetitive peak pulse current of 100A (10 / 1000µs), holding current of 150mA, low capacitance of 110pF, and low leakage current of 5µA. It has aging and noise resistant features. If destroyed, it will fall into short circuit, still ensuring protection. It is available in PowerSO-10TM and D2PAK packages for surface mount applications.

File format: PDF Size:192 KB

TDA2170 is a high efficiency power booster for direct driving of vertical windings of TV yokes. It is intended for use in Colour are B & W television receivers as well as in monitors and displays.

File format: PDF Size:192 KB

TDA2052 is a 60W Hi-Fi audio power amplifier with features such as mute/stand-by function, high output power, low distortion, etc. It is suitable for applications in the TV and Hi-Fi fields.

File format: PDF Size:169 KB

The TDA2052 is a monolithic integrated circuit in Heptawatt package, intended for use as audio class AB amplifier in TV or Hi-Fi field application. Thanks to the wide voltage range and to the high out current capability it’s able to supply the high- est power into both 4Ω and 8Ω loads even in presence of poor supply regulation. The built in Muting/Stand-by function simplifies the remote operations avoiding also switching on- off noises.

File format: PDF Size:169 KB

TDA2051 is a monolithic integrated circuit for audio class AB amplifier. It has features of high output power, high operating voltage, low distortion, and short circuit protection, making it suitable for Hi-Fi applications.

File format: PDF Size:43 KB

TDA2051 is a monolithic integrated circuit in Pentawatt package, intended for use as an audio class AB amplifier. It is able to provide up to 40W typ. into 4 ohm load @ THD = 10%, VS = ±18V, f = 1KHz and up to 33W into 8ohm load @ THD = 10%, VS = ±22V, f = 1KHz. Moreover, the TDA2051 delivers typically 60W music power into 4 ohm load over 1 sec at VS= 22.5V, f = 1KHz. The very low harmonic and crossover distortion performances make the device the most suitable for Hi-Fi field application.

File format: PDF Size:43 KB