Philips Manuals (Industrial)

This document describes the features and characteristics of the NE5080 supplier.

File format: PDF Size:533 KB

File format: PDF Size:659 KB

The NE5037 is a low cost, complete successive-approximation analog-to-digital (A/D) converter, fabricated using Bipolar/I2L technology. With an external reference voltage, the NE5037 will accept input voltages between 0V and VREF. An external START pulse of at least 300ns in duration will provide the 6-bit result of the conversion in parallel format. Full conversion with no missing codes occurs in 9µs.

File format: PDF Size:82 KB

NE5020 is a microprocessor-compatible monolithic 10-bit digital-to-analog converter subsystem. This device offers 10-bit resolution and ±0.1% accuracy and monotonicity guaranteed over full operating temperature range. Low loading latches, adjustable logic thresholds, and addressing capability allow the NE5020 to directly interface with most microprocessor- and logic-controlled systems. The NE5020 contains internal voltage reference, DAC switches and resistor ladder. Also, the input buffer and output summing amplifier are included. In addition, the matched application resistors for scaling either unipolar or bipolar output values are included on a single monolithic chip. The result is a near minimum component count 10-bit resolution DAC system.

File format: PDF Size:95 KB

The NE/SE5018/19 is a complete 8-bit digital-to-analog converter subsystem with features such as input latches and low-loading data inputs.

File format: PDF Size:66 KB

The DAC08 series is an 8-bit monolithic multiplying Digital-to-Analog Converter that provides very high-speed performance, low cost, and outstanding applications flexibility. Advanced circuit design achieves 70ns settling times with very low glitch and at low power consumption. Monotonic multiplying performance is attained over a wide 20-to-1 reference current range. Matching to within 1 LSB between reference and full-scale currents eliminates the need for full-scale trimming in most applications. Direct interface to all popular logic families with full noise immunity is provided by the high swing, adjustable threshold logic inputs. Dual complementary outputs are provided, increasing versatility and enabling differential operation to effectively double the peak-to-peak output swing. True high voltage compliance outputs allow direct output voltage conversion and eliminate output op amps in many applications. All DAC08 series models guarantee full 8-bit monotonicity and linearities as tight as 0.1% over the entire operating temperature range. Device performance is essentially unchanged over the ±4.5V to ±18V power supply range, with 37mW power consumption attainable at ±5V supplies. The compact size and low power consumption make the DAC08 attractive for portable and military aerospace applications.

File format: PDF Size:121 KB

The 74F74 is a dual positive edge-triggered D-type flip-flop featuring individual data, clock, set, and reset inputs; also true and complementary outputs.

File format: PDF Size:86 KB

this datasheet introduces the features and characteristics of the philips 74f776 pi-bus transceiver

File format: PDF Size:116 KB

This document introduces an octal transceiver named 74F657, which has the function of an 8-bit parity generator/checker. It combines the functions of 74F245 and 74F280A, and is suitable for applications that require high output drive and light bus loading.

File format: PDF Size:114 KB

This document is the datasheet of 74F655A and 74F656A. 74F655A and 74F656A are octal buffers and line drivers with parity generation/checking functions, designed to be employed as memory address drivers, clock drivers, I/O buffers and other applications.

File format: PDF Size:111 KB

74F651A/74F652A are bus transceiver circuits with 3-State outputs, D-type flip-flops, and control circuitry arranged for multiplexed transmission of data directly from the input bus or the internal registers. The devices combine 74F245 and two 74F374 type functions in one chip, and have high impedance base inputs for reduced loading (70µA in high and low states). They also feature independent registers for A and B buses, multiplexed real-time and stored data, and choice of non-inverting and inverting data paths.

File format: PDF Size:173 KB

This file is the product specification of 74F50729 produced by Philips Semiconductors. It is a dual positive edge-triggered D-type flip-flop with edge-triggered set and reset and metastable immune characteristics. The product has a skew of less than 1.5 ns, high source current (IOH = 15mA), and is ideal for clock driver applications.

File format: PDF Size:98 KB

74F50728 is a synchronizing cascaded dual positive edge-triggered D-type flip-flop

File format: PDF Size:93 KB

74F38 is a quad 2-input NAND buffer (open collector) manufactured by Philips Semiconductors. It has an industrial temperature range available (–40°C to +85°C), a typical propagation delay of 7.0ns and a typical supply current (total) of 13mA.

File format: PDF Size:76 KB

The document is a product specification for the Philips Semiconductors 74F32 Quad 2-input OR gate, describing the features and characteristics of the product.

File format: PDF Size:72 KB

This document describes the features and characteristics of the 74F3037 Quad 2-input NAND 30Ω driver integrated circuit produced by Philips Semiconductors, including 30Ω line driver, high speed, facilitates incident wave switching, and industrial temperature range available.

File format: PDF Size:74 KB

The document describes the product specifications of the 74F27 Triple 3-input NOR gate, including features such as industrial temperature range, typical propagation delay, and typical supply current.

File format: PDF Size:73 KB

This document describes the product specification of the 74F280B 9-bit odd/even parity generator/checker. The IC features high-impedance NPN base inputs for reduced loading, buffered inputs, and easy word length expansion by cascading. It is commonly used for error detection in high-speed data transmission or retrieval systems. The IC provides both even and odd parity outputs for generating or checking parity on up to 9 bits. Expansion to larger word sizes can be achieved by connecting the even parity outputs of multiple parallel devices to the data inputs of the final stage. The IC operates at industrial temperature range and has a fast propagation delay and low supply current.

File format: PDF Size:109 KB

74F257A is a quad 2-line to 1-line selector/multiplexer with non-inverting data path and 3-State outputs from Philips Semiconductors. It can be used in the industrial range of -40°C to +85°C.

File format: PDF Size:83 KB

The 74F244/74F244B is an octal buffer produced by Philips Semiconductors. It is ideal for driving bus lines of buffer memory address registers. The outputs are all capable of sinking 64mA and sourcing up to 15mA, producing very good capacitive drive characteristics. The device features two output enables, OEa and OEb, each controlling four of the 3-State outputs. The 74F244B is functionally equivalent to the 74F244. It has been designed to reduce effects of ground noise. Other advantages are noted in the features.

File format: PDF Size:98 KB