MAXIM Manuals (Industrial)

The MAX9994 is a high-linearity downconversion mixer from Texas Instruments that provides 8.3dB gain, +26.2dBm IIP3, and 9.7dB NF for 1400MHz to 2200MHz UMTS/WCDMA, DCS, and PCS base-station receiver applications.

File format: PDF Size:488 KB

The MAX9996 is a high-linearity downconversion mixer that provides 8.3dB gain, +26.5dBm IIP3, and 9.7dB NF for 1700MHz to 2200MHz UMTS/WCDMA, DCS, and PCS base-station receiver applications. With a 1900MHz to 2400MHz LO frequency range, this particular mixer is ideal for high-side LO injection receiver architectures. Low-side LO injection is supported by the MAX9994, which is pin-for-pin and functionally compatible with the MAX9996. In addition to offering excellent linearity and noise performance, the MAX9996 also yields a high level of component integration. This device includes a double-balanced passive mixer core, an IF amplifier, a dual-input LO selectable switch, and an LO buffer. On-chip baluns are also integrated to allow for single-ended RF and LO inputs. The MAX9996 requires a nominal LO drive of 0dBm, and supply current is guaranteed to be below 240mA. The MAX9994/MAX9996 are pin compatible with the MAX9984/MAX9986 815MHz to 995MHz mixers, making this entire family of downconverters ideal for applications where a common PC board layout is used for both frequency bands. The MAX9996 is also functionally compatible with the MAX9993. The MAX9996 is available in a compact, 20-pin, thin QFN package (5mm x 5mm) with an exposed paddle. Electrical performance is guaranteed over the extended -40°C to +85°C temperature range. Applications: UMTS/WCDMA Base Stations, DCS1800/PCS1900 EDGE Base Stations, cdmaOne™ and cdma2000® Base Stations, PHS/PAS Base Stations.

File format: PDF Size:411 KB

MAX9986 is a high-linearity downconversion mixer that provides 10dB gain, +23.6dBm IIP3, and 9.3dB NF for frequencies from 815MHz to 995MHz.

File format: PDF Size:1034 KB

The MAX9984 high-linearity downconversion mixer provides 8.1dB gain, +25dBm IIP3, and 9.3dB NF for 400MHz to 1000MHz base-station receiver applications. With an optimized 570MHz to 850MHz LO frequency range, this particular mixer is ideal for low-side LO injection receiver architectures in the cellular band. High-side LO injection is supported by the MAX9986, which is pin-for-pin and functionally compatible with the MAX9984. In addition to offering excellent linearity and noise performance, the MAX9984 also yields a high level of component integration. This device includes a double-balanced passive mixer core, an IF amplifier, a dual-input LO selectable switch, and an LO buffer. On-chip baluns are also integrated to allow for single-ended RF and LO inputs. The MAX9984 requires a nominal LO drive of 0dBm, and supply current is guaranteed to be below 265mA. The MAX9984/MAX9986 are pin compatible with the MAX9994/MAX9996 1700MHz to 2200MHz mixers, making this entire family of downconverters ideal for applications where a common PC board layout is used for both frequency bands. The MAX9984 is also functionally compatible with the MAX9993. The MAX9984 is available in a compact, 20-pin, thin QFN package (5mm x 5mm) with an exposed paddle. Electrical performance is guaranteed over the extended -40°C to +85°C temperature range.

File format: PDF Size:495 KB

File format: PDF Size:0 KB

The MAX9985 is a high-linearity, dual-channel downconversion mixer designed to provide approximately 6dB gain, +28.5dBm of IIP3 and 10.5dB of noise figure (NF) ideal for diversity receiver applications.

File format: PDF Size:218 KB

The MAX19985A is a high-linearity, dual-channel, downconversion mixer designed for 700MHz to 1000MHz diversity receiver applications.

File format: PDF Size:1524 KB

The MAX19996 is a single-channel, high-linearity downconversion mixer that provides 8.7dB conversion gain, +24.5dBm IIP3, and 9.6dB noise figure for 2000MHz to 3000MHz WCS, LTE, WiMAX™, and MMDS wireless infrastructure applications.

File format: PDF Size:399 KB

The MAX19995 dual-channel downconverter provides 9dB of conversion gain, +24.8dBm input IP3, +13.3dBm 1dB input compression point, and a noise figure as low as 9dB for 1700MHz to 2200MHz diversity receiver applications.

File format: PDF Size:745 KB

The MAX19997A is a dual downconversion mixer suitable for 1800MHz to 2900MHz base station applications. It provides high linearity and low noise figure, and supports both low-side and high-side LO injection architectures. It features 8.7dB gain, +24dBm input IP3, and 10.3dB noise figure in the low-side configuration.

File format: PDF Size:626 KB

The MAX19999 is a dual-channel downconverter from Texas Instruments that provides 8.3dB of conversion gain, +24dBm input IP3, +11.4dBm 1dB input compression point, and a noise figure of 10.5dB for 3000MHz to 4000MHz WiMAX™ and LTE diversity receiver applications.

File format: PDF Size:419 KB

The MAX19996A is a single, high-linearity downconversion mixer designed for 2000MHz to 3900MHz WCS, LTE, WiMAX, and MMDS wireless infrastructure applications. It provides 8.7dB conversion gain, +24.5dBm IIP3, and 9.8dB noise figure. The MAX19996A can be used in both low-side and high-side LO injection architectures for 2.5GHz and 3.5GHz applications. It integrates a double-balanced passive mixer core, an IF amplifier, and an LO buffer. On-chip baluns are also included to support single-ended RF and LO inputs. The MAX19996A is available in a compact 5mm x 5mm, 20-pin thin QFN package.

File format: PDF Size:1183 KB

The MAX19995A is a dual-channel downconverter from Texas Instruments that is designed to provide 8.7dB of conversion gain, +24.8dBm input IP3, +13.5dBm 1dB input compression point, and a noise figure of 9.2dB for 1700MHz to 2200MHz diversity receiver applications.

File format: PDF Size:525 KB

The MAX19998 is a high-linearity downconversion mixer from Maxim that operates from 2300MHz to 4000MHz and supports 2.5GHz and 3.5GHz applications. The device features a double-balanced passive mixer core, an IF amplifier, and an LO buffer. It also integrates RF and LO input baluns. The MAX19998 requires a nominal LO drive of 0dBm and consumes a typical current of 230mA at VCC = 5.0V or 150mA at VCC = 3.3V.

File format: PDF Size:4992 KB

The MAX19994A dual-channel downconverter is designed to provide 8.4dB of conversion gain, +25dBm input IP3, +14dBm 1dB input compression point, and a noise figure of 9.8dB for 1200MHz to 2000MHz diversity receiver applications.

File format: PDF Size:5132 KB

The MAX19993 is a dual-channel downconverter designed for diversity receiver applications in the frequency range of 1200MHz to 1700MHz. It offers 6.4dB conversion gain, +27dBm input IP3, 15.4dBm 1dB input compression point, and a noise figure of 9.8dB. The MAX19993 also provides excellent linearity and noise performance, and features integrated double-balanced passive mixer cores, LO buffers, a dual-input LO selectable switch, and a pair of differential IF output amplifiers.

File format: PDF Size:3178 KB

The MAX2660/MAX2661/MAX2663/MAX2671/MAX2673 miniature, low-cost, low-noise upconverter mixers are designed for low-voltage operation and are ideal for use in portable consumer equipment. Signals at the IF input port are mixed with signals at the local oscillator (LO) port using a double-balanced mixer. These upconverter mixers operate with IF input frequencies between 40MHz and 500MHz, and upconvert to output frequencies as high as 2.5GHz. These devices offer a wide range of supply currents and output intercept levels to optimize system performance. Supply current is essentially constant over the specified supply voltage range. Additionally, when the devices are in a typical configuration with VSHDN = 0, a shutdown mode reduces the supply current to less than 1µA. The MAX2660/MAX2661/MAX2663/MAX2671 are offered in the space-saving 6-pin SOT23 package. For applications requiring balanced IF ports, choose the MAX2673 in the 8-pin µMAX package.

File format: PDF Size:235 KB

MAX2039 is a high-linearity passive upconverter or downconverter mixer designed to support UMTS/WCDMA, DCS, and PCS base-station transmitter or receiver applications with an RF frequency range of 1700MHz to 2200MHz, NF of 7.3dB, and conversion loss of 7.1dB. The IIP3 is typically +34.5dBm and +33.5dBm for downconversion and upconversion operation, respectively. With an LO frequency range of 1500MHz to 2000MHz, this particular mixer is ideal for low-side LO injection architectures. (For a pin-to-pin-compatible mixer meant for high-side LO injection, contact the factory.) In addition to offering excellent linearity and noise performance, the MAX2039 also yields a high level of component integration. This device includes a double-balanced passive mixer core, a dual-input LO selectable switch, and an LO buffer. On-chip baluns are also integrated to allow for a single-ended RF input for downconversion (or RF output for upconversion), and single-ended LO inputs. The MAX2039 requires a nominal LO drive of 0dBm, and supply current is guaranteed to be below 135mA. The MAX2039 is pin compatible with the MAX2031 815MHz to 995MHz mixer, making this family of passive upconverters and downconverters ideal for applications where a common PC board layout is used for both frequency bands. The MAX2039 is available in a compact 20-pin thin QFN package (5mm x 5mm) with an exposed paddle. Electrical performance is guaranteed over the extended -40°C to +85°C range.

File format: PDF Size:312 KB

The MAX2031 is a high-linearity passive upconverter or downconverter mixer designed to provide +36dBm IIP3, 7dB NF, and 7dB conversion loss for a 650MHz to 1000MHz RF frequency range to support GSM/cellular base-station transmitter or receiver applications.

File format: PDF Size:1603 KB

The MAX2041 high-linearity passive upconverter or downconverter mixer is designed to provide 7.4dB NF and a 7.2dB conversion loss for an RF frequency range of 1700MHz to 3000MHz to support UMTS/WCDMA, DCS, PCS, and WiMAX base-station transmitter or receiver applications. The IIP3 is typically +33.5dBm for both downconversion and upconversion operation. With an LO frequency range of 1900MHz to 3000MHz, this particular mixer is ideal for high-side LO injection architectures. (For a pin-compatible mixer meant for low-side LO injection, refer to the MAX2039.) In addition to offering excellent linearity and noise performance, the MAX2041 also yields a high level of component integration. This device includes a double-balanced passive mixer core, a dual-input LO selectable switch, and an LO buffer. On-chip baluns are also integrated to allow for a single-ended RF input for downconversion (or RF output for upconversion), and single-ended LO inputs. The MAX2041 requires a nominal LO drive of 0dBm, and supply current is guaranteed to be below 145mA. The MAX2041 is pin compatible with the MAX2031 815MHz to 995MHz mixer, making this family of passive upconverters and downconverters ideal for applications where a common PC board layout is used for both frequency bands. The MAX2041 is available in a compact 20-pin thin QFN package (5mm x 5mm) with an exposed paddle. Electrical performance is guaranteed over the extended -40°C to +85°C temperature range.

File format: PDF Size:396 KB