AMPROBE Manuals

This document presents the data sheet and features of Amprobe® Test Tools. The HD110C is a heavy-duty digital multimeter with features such as measuring up to 1500 VDC CAT IV 1000 V, IP67 rating, waterproof construction, drop resistance, and high voltage test leads.

The TDR-400 is a handy, light impulse reflectometer, processor controlled, with LCD display for check and locate faults in telecommunication and power cables. Measuring principle: The measuring pulse fed into the cable will reflected by in homogeneity of the cable impedance (cable faults) and showed on the display. The distance and the kind of the fault can be determined out of the shape and the time setting of the reflection (Practical experience can be obtained by test measurements). If the cable is terminated with a resistance equal to the impedance of the cable, no reflexion occurs when the cable is faultless. In the case of breaks, contact faults in sleeves, short circuits or taps/splitter in the sector to be tested, the distance to the cable beginning can be determined by the pulse echo. If wide pulses are used for the measurement, the echoes are stronger, but faultless taps/splitter cause then strong echoes. Propagation factor The Propagation factor (nvp-value) declares the velocity of electrical signals in the cable in relation to the speed of light. The propagation factor of the cable under test must always preset before the length measurement. If the propagation factor is unknown, a approximate value is set and the fault is determined from both ends of the cable. Impulse Reflectometer FEATURES TDR-400 Measuring range 0 - 2000 m Resolution 0.25 m, 0.5 m, 1 m, 4 m Accuracy 0.2 % of the measuring range Propagation factor

Amprobe HD160C Heavy-Duty Digital Multimeter is a rugged autoranging meter with true-rms function that can measure up to 1500 Vdc and 1000 Vac CAT IV 1000 V, and has IP67 waterproof rating. It can also measure capacitance, temperature and frequency.

Amprobe LM-100 light meter measures the visible light from fluorescent, metal halide, high-pressure sodium or incandescent sources. It is a portable, easy-to-use digital light meter designed for simple one-hand operation reading in Lumen (lux) or footcandle (fc) units. The LM-100 measures a wide range of light up to 20,000 fc or lux with an accurate, high resolution of 0.01 fc/lux. Use the LM-100 light meter to measure the illumination level in the interior and to switch off or reduce or increase the output level of lighting fixtures. Reduce the energy burden of the building by significantly increasing the efficiency of its lighting system.

Amprobe LM-120 light meter instruction manual.

The 5XP-A digital multimeter is a compact, full-purpose multimeter that provides superior features and accuracy in a smaller form factor. The 5XP-A has unique features such as VolTect™ non-contact voltage (NVC) detection and our exclusive Magne-Grip™ holster that frees both hands for work. The 5XP-A is the right choice for residential, commercial and general troubleshooting applications.

Amprobe® Test Tools is a professional meter with a wide range of measuring features, including AC/DC voltage, current, resistance, frequency, and capacitance, etc. The meter features True RMS, backlight display, non-contact voltage detection, audible continuity, auto-check feature, and automatic range selection. It also has a large, easy-to-read LCD display, auto power off, low battery indication, data hold, and voltage overload protection for all functions.

Amprobe® Test Tools is a test tool with features such as full range capacitance and resistance measurement, dual zero adjustment, and low ohms range.

Amprobe IR608A infrared thermometer is a small, lightweight and easy-to-use thermometer that can be used in a variety of applications, such as HVAC/R, fire safety and protection, industrial maintenance, automotive and quality control.

The Amprobe® Test Tools Data Sheet introduces the features and characteristics of the THWD-3 Relative Humidity Temperature Meter. It has a dual display, an extended probe stem for easy access to air ducts, a wide measurement range, and multiple display options including dew point and wet bulb.

The Amprobe SM-10 sound level meter conforms to the IEC651 Type 2, ANSI S1.4 Type 2, and JISC1502 requirements for Sound Level Meters. A and C weightings for checking compliance with safety regulations as well as acoustic analysis

The 15XP-A Digital Multimeter is a compact digital multimeter for electronics and test applications. The 15XP-A is the right choice for electronics engineers, technicians and field service.

ACD-6 Pro and ACD-6 TRMS Pro 1000 A are digital clamp-ons. These products are simple to operate and well-suited for most basic applications. The TRMS version improves performance and reliability.

This document is a data sheet for Amprobe® Test Tools, which introduces the features and characteristics of the DM7C Digital Multimeter. It is a digital display multimeter suitable for home, auto, boat, RV, or workshop use. It has 6 functions and 14 ranges, with special ranges for testing batteries. It comes with industry standard test leads, safety rating, and a protective holster. It is CAT II 600 V rated and is a full-performing meter. The included accessories are protective holster, test leads, battery, and user manual. The optional accessory is VC30A vinyl case and it is rated for 600V.

This document is the data sheet of Amprobe® AD105A True RMS Digital Ammeter, which introduces the product's features, characteristics, specifications and other information.