Key facts
- Brand
- Taian
- Model
- E310
- Documents
- 3
- Languages
- ZH
- Last added
- 2012-03-21
Start here
Taian E310 Series Motor Driver User Manual
The E310 series is an IGBT motor driver offered in 220 V and 380 V versions for power ranges up to 3.7 kW. It is intended for industrial applications requiring precise speed control and reliable protection features.
This manual covers safety precautions, model specifications, installation procedures, parameter settings, communication interfaces, and detailed troubleshooting and maintenance instructions to help users install, operate, and service the device safely. This manual is written in Chinese.
Taian E310 specifications
| Input Voltage | 200‑240 V AC 1‑phase, 30/60 Hz |
|---|---|
| Output Voltage | 0‑240 V AC 3‑phase, 1.6 kVA, 4.2 A |
| Power Rating | 0.4 kW – 1.5 kW (0.88 kVA – 2.9 kVA) |
Source: TAIAN micro treatment Machine control IGBT Push Move alternating Motor driver E310 series Manual
All Taian E310 documents by type
Day-to-day operation, settings and troubleshooting. Start here if the product is already set up.
Questions answered in these manuals
What safety precautions are required when operating the E310 driver?
The manual warns that improper operation can cause personal injury or damage to the driver, and it stresses correct grounding, avoiding contact with internal circuitry, and keeping the device away from flammable materials.
How can I troubleshoot a fault on the E310 driver?
Refer to Chapter 5 “故障排除及保間” which lists fault indicators, common causes, and step‑by‑step diagnostic procedures for both special and general faults.
What is the input voltage range for the S310‑201‑H1BCD inverter?
The inverter accepts a single‑phase AC input of 200 V to 240 V at 30 Hz or 60 Hz.
From: TAIAN micro treatment Machine control IGBT Push Move alternating Motor driver E310 series Manual
What safety precautions must be taken before powering the drive?
The power voltage must match the drive’s name‑plate rating, the grounding impedance must be less than 100 Ω (220 V) or 10 Ω (380 V), and no wiring should be touched until the indicator lights are off.
How should the power and output terminals be connected?
L1, L2, L3 are the input terminals for the supply and must never be mixed with the output terminals T1, T2, T3.