Key facts
- Brand
- SWAN
- Model
- SWAN 1000
- Category
- Other
- Industry
- Electronics
- Documents
- 2
- Languages
- RU · ZH
- Last added
- 2026-11-09
Start here

SWAN SWAN 1000 PIR and Microwave Motion Detector Installation Guide
This document provides installation instructions for the SWAN SWAN 1000, a professional passive infrared and microwave motion detector. It covers site selection, mounting procedures for wall or corner installation, and wiring connections for power, tamper, and relay outputs. The guide also details how to configure the device's sensitivity for both infrared and microwave channels and set the animal immunity threshold. This manual is written in Russian.
Read onlineSWAN 1000 specifications
| Detection method | 四元红外 and 微波 |
|---|---|
| Operating voltage | 8.2 – 16 V DC |
| Trigger current consumption | 25.5 mA |
| Standby current consumption | 16.5 mA |
| Alarm output | NC 28 VDC 0.1 A with 10 Ω resistor |
| Dimensions | 123 mm × 62 mm × 38 mm |
| Weight | 120 g |
| Preheat time | 1 minute |
| Alarm time | 2 ± 1 s |
Source: SWAN 1000 Passive Infrared and Microwave Dual-Technology Detector Installation Manual
All SWAN 1000 documents by type
Mounting, wiring and first power-up. Read it before the hardware goes in.
Questions answered in these manuals
What is the animal immunity weight limit for the SWAN 1000?
The detector ignores animals up to 25 kg, or 15 kg if the PET switch is set to ON.
From: SWAN SWAN 1000 PIR and Microwave Motion Detector Installation Guide
How do I set the pet‑immunity function?
Use the PET switch: set it to ON to protect pets up to 15 kg, or set it to OFF to protect pets up to 25 kg.
From: SWAN 1000 Passive Infrared and Microwave Dual-Technology Detector Installation Manual
How can I adjust the detection distance?
Turn the MW knob; the middle position gives a 15 m range, while the minimum position reduces the range to 7 m.
From: SWAN 1000 Passive Infrared and Microwave Dual-Technology Detector Installation Manual
