Key facts
- Brand
- Pioneer
- Model
- DJM-800
- Category
- Other Electronics
- Industry
- Electronics
- Documents
- 3
- Languages
- EN
- Last added
- 2012-07-09
Start here
Pioneer DJM-800 DJ Mixer Operating Instructions
This document provides operating instructions for the Pioneer DJM-800 DJ mixer. It begins with important safety warnings regarding electric shock and proper ventilation, advising users to keep the unit away from water and heat sources. The manual also includes a section on establishing a safe listening level to prevent hearing damage from excessive volume.
Read onlinePioneer DJM-800 specifications
| Sampling Rate | 96kHz/24bit |
|---|---|
| DSP Processing | 32bit DSP |
| Frequency Response | 20Hz - 20kHz |
| Total Harmonic Distortion | 0.005% or less |
| Signal-to-Noise Ratio | 105dB (LINE) |
| Power Consumption | 32W |
All Pioneer DJM-800 documents by type
Day-to-day operation, settings and troubleshooting. Start here if the product is already set up.
Mounting, wiring and first power-up. Read it before the hardware goes in.
Questions answered in these manuals
How many hole covers are located on each side of the DJM-800?
There are three hole covers on the left side and three on the right side.
What tool is required to remove the hole covers?
You must use a flat-head screwdriver to pop out the covers.
What is the minimum space required at the rear of the unit for ventilation?
You must leave at least 5 cm of space around the rear of the unit to ensure proper heat radiation.
How should the unit be cleaned if the surfaces are very dirty?
Wipe the unit with a soft cloth dipped in neutral cleanser diluted five or six times with water, then wipe again with a dry cloth.
What is the Auto Harmonic Tuning function?
It detects the key of a song and automatically corrects it to the closest true key to facilitate perfect harmonic mixing.
What effects are available on all channels?
The mixer incorporates a highpass/low-pass filter, notch filter, and bit crusher effect for all channels.