Key facts
- Brand
- Motec
- Model
- M400/M600/M800
- Category
- Car parts
- Industry
- Automotive
- Documents
- 2
- Languages
- EN
- Last added
- 2026-11-17
Start here

MoTeC M400/M600/M800/M880 ECU User Manual
This manual provides comprehensive instructions for the MoTeC M400, M600, M800, and M880 Engine Management Systems (ECUs). It covers the introduction to the different ECU models, their specific features such as injector and ignition outputs, and available options like telemetry and wideband lambda inputs. The guide is essential for understanding the installation and calibration requirements of these programmable Engine Control Units.
Read onlineMoTec M400/M600/M800 specifications
| Communication bus | CAN |
|---|---|
| ECU front connectors | A (34 pins) and B (26 pins) |
| CAN connector | B connector: B23 CAN+, B24 CAN-, B14 GND |
| CAN baud rate (firmware lower than 2.30S) | 400 kbit |
| CAN baud rate (firmware 2.30S or higher) | 1 Mbit |
| CAN baud rate (firmware 3.x) | 1 Mbit or 500 kbit |
| Configuration software | MoTec ECU Manager 3.x |
Source: MoTec M400/M600/M800 ECU AiM Device Connection Guide
All MoTec M400/M600/M800 documents by type
Mounting, wiring and first power-up. Read it before the hardware goes in.
Day-to-day operation, settings and troubleshooting. Start here if the product is already set up.
Questions answered in these manuals
What baud rate is used with firmware lower than 2.30S?
400 kbit.
Which connector carries the CAN bus?
The CAN bus is available on the B connector; B23 is CAN+, B24 is CAN-, and B14 is GND.
What is the operating voltage range for the MoTeC ECU?
The ECU operates on a voltage range of 6 to 22 Volts DC.
Can the MoTeC ECU be used for racing and off-highway use?
Yes, the manual states these ECUs are for racing and off highway use only.
