Key facts
- Brand
- KUTAI
- Model
- GCU-30
- Industry
- Electronics
- Documents
- 2
- Languages
- EN
- Last added
- 2023-10-19
Start here
KUTAI GCU-3000 Automatic Engine Control and Protection Module Operators Manual
The GCU-3000 is an integrated automatic engine control and protection module designed for generator applications. It features an LCD screen, emergency stop button, and programmable settings for start cycles, idle speed, and cool-down timers. The module monitors engine parameters like voltage, current, temperature, and oil pressure, and provides shutdown protection if thresholds are exceeded. It can be programmed directly from the front panel without a computer.
Operation modes include Auto (remote start), Manual (front panel start), and Off/Reset. The unit includes a failure event log, remote warning signals, and optional CANBus transducer support. Settings are stored in EEPROM and can be adjusted via 68 programmable lines.
Kutai GCU-30 specifications
| Rated DC Input Voltage | 9.0 to 36 V |
|---|---|
| Rated AC Input Voltage | 5 ~ 300VAC |
| AC Frequency | 50/60 Hz |
| Operation Temperature | -20 °C to +60 °C |
| Relative Humidity | 90% or Below |
| Weight | 101 g ± 2% |
Source: Kutai GCU-30 Key Start Genset Control and Protection Module User Manual
All Kutai GCU-30 documents by type
Day-to-day operation, settings and troubleshooting. Start here if the product is already set up.
Questions answered in these manuals
How long is the engine stop timer delay?
The delay is 20 seconds if SW3 is ON, or 10 seconds if OFF.
From: Kutai GCU-30 Key Start Genset Control and Protection Module User Manual
What happens if the engine fails to fire?
The module will automatically disengage the starter motor and shut down the engine to prevent damage.
From: Kutai GCU-30 Key Start Genset Control and Protection Module User Manual
How do I program the GCU-3000?
Enter programming mode by pressing OFF and then UP Arrow, Down Arrow, Pen, and Mute buttons together for 4 seconds. Adjust settings line by line using UP/Down arrows and confirm with the Pen button.
From: KUTAI GCU-3000 Automatic Engine Control and Protection Module Operators Manual
What happens if the generator fails to start?
The system will attempt to restart up to three times after a 5-second rest. If it fails, it displays a flashing FAIL signal and triggers an alarm and warning output.
From: KUTAI GCU-3000 Automatic Engine Control and Protection Module Operators Manual