Key facts
- Brand
- ITech
- Model
- IT8500+
- Category
- Other Electronics
- Industry
- Electronics
- Documents
- 5
- Languages
- ZH
- Last added
- 2026-10-21
Start here
ITECH IT8500+ Series DC Programmable Electronic Load User Manual
This document is the user manual for the ITECH IT8500+ series of DC programmable electronic loads. It provides comprehensive instructions on unboxing, installation, and setup, including details on the front and rear panels, keyboard, and VFD status indicators. The guide explains how to perform self-checks upon startup and describes the various operating modes available. This manual is written in Chinese.
Read onlineITECH IT8500+ specifications
| Voltage Range | 120V / 500V (model dependent) |
|---|---|
| Current Range | 30A / 60A / 120A (model dependent) |
| Power Range | 150W to 600W (model dependent) |
| Dynamic Mode Frequency | Up to 10KHz |
| Voltage Measurement Resolution | 0.1mV |
| Current Measurement Resolution | 0.1mA |
| Measurement Speed | Up to 40KHz |
| Memory Capacity | 100 groups |
Source: ITECH IT8500+ Series DC Programmable Electronic Load User Manual
All ITECH IT8500+ documents by type
Day-to-day operation, settings and troubleshooting. Start here if the product is already set up.
Instruction set, parameters and examples for configuring or programming the device.
Questions answered in these manuals
What are the four operating modes of the IT8500+?
The four operating modes are Constant Current (CC), Constant Voltage (CV), Constant Resistance (CR), and Constant Power (CW).
From: ITECH IT8500+ Series DC Programmable Electronic Load User Manual
What should be done before cleaning the instrument?
You must disconnect the power supply before cleaning the instrument to ensure safety.
From: ITECH IT8500+ Series DC Programmable Electronic Load User Manual
What is the warranty period for the IT8500+ Series Electronic Load?
ITECH provides a one-year quality warranty service for the material and manufacturing of the product starting from the shipping date.
From: Itech IT8500+ Series DC Programmable Electronic Load Programming and Syntax Guide
What are the required operating temperature and humidity conditions?
The unit must operate between 0°C and 40°C at a humidity level of 20% to 80% non-condensing.
From: Itech IT8500+ Series DC Programmable Electronic Load Programming and Syntax Guide
Which communication interfaces can be used with the IT8500+ load?
The load supports optional RS232, USB, and RS485 interfaces via dedicated communication modules.
From: ITECH IT8500+ Series Programmable DC Electronic Load User Manual
What should I do if the electronic load does not start?
Check that the power cable is properly connected, verify the voltage setting matches the mains, and inspect the fuse; replace it with the same specification if it is blown.
From: ITECH IT8500 Series Programmable DC Electronic Load User Manual