Key facts
Start here

IBM FlashSystem A9000R Models 9835-415, 9837-415, 9835-425, 9837-425, and 9837-U25 Deployment Guide
This guide details the deployment of IBM FlashSystem A9000R storage systems, covering physical installation, power and network requirements, and migration best practices. It includes specifications for models 9835-415, 9837-415, 9835-425, 9837-425, and 9837-U25, with configurations for rack setups, cooling, and connectivity. The guide also addresses safety, environmental, and security considerations for installation and operation.
Read onlineIBM FlashSystem A9000R specifications
| Models covered | 425 and 25U |
|---|---|
| Software version | V12.3.2 |
| Storage utility model | 9837-U25 |
| Grid element height | 6U |
| Grid controllers per grid element | 2 |
| Flash enclosures per grid element | 1 |
| Maximum capacity (Model 425) | 3.6 PB in a single rack |
| Entry-level Grid-Starter change | Removes one grid controller and one flash enclosure |
| Scale-out target flash enclosures | 2, 3, or 4 |
| Scale-out target grid controllers | 4, 6, or 8 |
| Compression saving rate | 2:1 |
| Effective data capacity | 5x original usable physical capacity |
| Synchronous mirroring distance | Less than 100 km (62 miles) |
| Sync mirrors supported | Up to 3072 |
| Async mirrors supported | Up to 1024 |
| Remote targets maximum | 10 |
| QoS levels | Domain, pool, and volume |
| Snapshot time | Subsecond |
| Multi-site HA/DR systems | 3 |
| Hyper-Scale Manager GUI minimum (intelligent capacity) | 5.5.1 |
| Hyper-Scale Manager GUI minimum (VLAN) | 5.6 |
| Model 415 withdrawal | June 2018 |
All IBM FlashSystem A9000R documents by type
Instruction set, parameters and examples for configuring or programming the device.
Day-to-day operation, settings and troubleshooting. Start here if the product is already set up.
Mounting, wiring and first power-up. Read it before the hardware goes in.
Questions answered in these manuals
Which version of IBM FlashSystem A9000R does this guide apply to?
The guide applies to version 12.0.3 of IBM FlashSystem A9000R and to subsequent releases until a newer publication indicates otherwise.
From: IBM FlashSystem A9000R Version 12.0.3 Command-Line Interface (CLI) Reference Guide
What is the publication number of this CLI reference guide?
It is SC27-8711-03.
From: IBM FlashSystem A9000R Version 12.0.3 Command-Line Interface (CLI) Reference Guide
Which IBM FlashSystem A9000R models does this guide cover?
It covers Models 425 and 25U.
What is the maximum capacity of FlashSystem A9000R Model 425?
It can scale up to 3.6 PB in a single rack.
What are the processor specifications for the Model 415 grid controllers?
Each grid controller contains two Intel Xeon E5 v3 10-core 2.3 GHz processors.
From: IBM FlashSystem A9000R Models 9835-415, 9837-415, 9835-425, 9837-425, and 9837-U25 Deployment Guide
What software versions are required for the Model 425 and U25?
IBM FlashSystem A9000 and A9000R software v12.2.x or later is required.
From: IBM FlashSystem A9000R Models 9835-415, 9837-415, 9835-425, 9837-425, and 9837-U25 Deployment Guide
