Key facts
- Brand
- IBM
- Model
- ESS expansion Model 084
- Category
- Disk Expansion Unit
- Documents
- 2
- Languages
- EN
- Last added
- 2023-11-30
Start here

IBM ESS expansion Model 084 Installation and User Guide
This IBM ESS expansion Version 5.3.5 Installation and User Guide covers the ESS expansion Model 084 (5147-084), a 5U84 rack-mounted enclosure that holds two drawers of disk drives in carriers. The document opens with appliance safety precautions, including handling, relocating a racked system, electrical safety, rack safety and electrostatic discharge precautions, before describing the chassis, power supply units, cooling modules, SBB I/O modules and enclosure management.
The remaining chapters explain installation, power cord connection, grounding checks and system configurations; daily operation such as power on, operator panel LEDs, unit identification numbers, power down and locking drawers; troubleshooting, LEDs, thermal sensors, hardware faults and firmware updates; and replacing field-replaceable modules (DDICs, cooling modules, PSUs and SBB I/O modules). Appendices give technical specifications (dimensions, weights, components, thermal, temperature and humidity limits, supported drives, shock and vibration tolerance) and standards, regulations and notices.
IBM ESS expansion Model 084 specifications
| Height (enclosure, overall) | 8.75 in (222.3 mm) |
|---|---|
| Width across mounting flange | 19 in (482.6 mm) |
| Depth | 36 in (915 mm) from rear of front flanges to rear extremity of chassis |
| Weight, fully populated enclosure | 298 lb (135 kg), approximate |
| Weight, drive carrier | 1.8 lb (0.8 kg), approximate |
| Weight, PSU | 6 lb (2.7 kg), approximate |
| Weight, cooling module | 3 lb (1.4 kg), approximate |
| Drawers per enclosure | 2 |
| Disk drives in carriers (DDICs) in a fully populated enclosure | 84 |
| SBB I/O modules in a fully populated enclosure | 2 |
| Cooling modules in a fully populated enclosure | 5 |
Source: IBM ESS expansion Model 084 Installation and User Guide
All IBM ESS expansion Model 084 documents by type
Mounting, wiring and first power-up. Read it before the hardware goes in.
Day-to-day operation, settings and troubleshooting. Start here if the product is already set up.
Questions answered in these manuals
Which products does this guide apply to?
It applies to IBM ESS expansion Model 084 and IBM SAS Storage Enclosure 5107-084.
From: IBM ESS expansion Version 5.1 Model 084 SC27-4627-02 Quick Installation Guide
What should you read before using the product?
Read the general information in Notices and the IBM Environmental Notices and User Guide.
From: IBM ESS expansion Version 5.1 Model 084 SC27-4627-02 Quick Installation Guide
What are the dimensions of the ESS expansion Model 084 enclosure?
The enclosure is 8.75 in (222.3 mm) high, 19 in (482.6 mm) wide across the mounting flange, and 36 in (915 mm) deep from the rear of the front flanges to the rear extremity of the chassis.
From: IBM ESS expansion Model 084 Installation and User Guide
How much does a fully populated enclosure weigh?
A fully populated enclosure weighs approximately 298 lb (135 kg).
From: IBM ESS expansion Model 084 Installation and User Guide
