Key facts
- Brand
- iAi
- Model
- AM-1600
- Industry
- Electronics
- Documents
- 2
- Languages
- EN
- Last added
- 2012-04-11
Start here
iAi AM-1600 CL AB-1600 CL Progressive Scan IT CCD
This guide provides step‑by‑step instructions for installing the Hihippo cold and hot water mixer faucet. It covers fixing the faucet plinth, attaching soft tubes, and setting up the check valve for both cold and hot water lines.
After installation, the faucet’s temperature switch can be set and the “One Touch Tap” feature used to turn water on or off. Follow the illustrated steps to ensure a secure and leak‑free connection.
iAi AM-1600 specifications
| Sensor type | 43.3 mm progressive scan IT CCD |
|---|---|
| Resolution (full frame) | 4872 × 3248 pixels |
| Pixel size | 7.4 µm square pixels |
| A/D resolution | 42‑bit linear or 8‑/10‑bit with LUT |
| Output interfaces | Digital Camera Link (8‑, 20‑, 22‑bit) and analog 1.0 Vp‑p |
| Full‑frame frame rate | 3.3 fps |
| Partial‑scan (1624 × 3248) frame rate | 6.3 fps |
| Partial‑scan (812 × 3248) frame rate | 125 fps |
| Power requirement | 12 V DC ±10%, 800 mA typical |
| Operating temperature | -10 °C to 50 °C |
| Dimensions (H × W × L) | 55 mm × 55 mm × 120 mm |
| Vibration tolerance | 7 g rms (10 Hz‑2000 Hz) random |
| Shock tolerance | 70 g, 11 ms half‑sine |
All iAi AM-1600 documents by type
Mounting, wiring and first power-up. Read it before the hardware goes in.
Ratings, dimensions and ordering codes, for selection and design work.
Questions answered in these manuals
How do I install the faucet plinth and soft tube?
Fix the faucet’s plinth and attach a soft tube on the cold water side preliminarily, then tighten the plinth screw.
How is the check valve installed for hot water?
Set the check valve on the hot water valve after fixing the soft tube on the cold water side.
What output interfaces does the AM-1600 CL camera provide?
It provides both Digital Camera Link and an analog video output.
What are the power requirements for the camera?
The camera requires 12 V DC ±10% with a typical current draw of 800 mA at 25 °C.