Key facts
- Brand
- FANUC
- Model
- Series 30:
- Category
- Industrial Robot
- Documents
- 5
- Languages
- ZH · EN · JA
- Last added
- 2026-09-29
Start here

FANUC CNC System User's Manual for Series 30:/300i/300is-MODEL A, Series 31:/310:/310is-MODEL AS, Series 31:/310:/310is-
This manual provides safety precautions and operational guidelines for FANUC CNC systems, including Series 30, 31, and 321 models. It covers critical safety warnings, programming best practices, and handling procedures to prevent injury or equipment damage. Users must read and follow all safety instructions before operating the machine.
The manual includes detailed sections on coordinate system setup, nonlinear interpolation, rotation axis programming, and unit conversions. It also advises users to verify machine settings, backup data, and consult machine tool builder manuals for model-specific functions.
FANUC Series 30: specifications
| Maximum axes for HRV2 controller | 4 axes |
|---|---|
| Supported display sizes for 7.2"/8.4"/10.4" motherboard | 7.2" / 8.4" / 10.4" |
| Maximum axes for HRV4 controller | 1 axis (not usable on 32i) |
Source: FANUC Series 30 i/300 i/300 is/31 i/310 i/310 is/32 i/320 i Service Manual
All FANUC Series 30: documents by type
Disassembly, diagnostics and part numbers, for repair.
Day-to-day operation, settings and troubleshooting. Start here if the product is already set up.
- FANUC Series 30*/300*/300*s-MODEL A/31*/310*/310*s-MODEL A5/31*/310*/310*s-MODEL A/32*/320*/320*s-MODEL A User Manual 437 p
- FANUC CNC System User's Manual for Series 30:/300i/300is-MODEL A, Series 31:/310:/310is-MODEL AS, Series 31:/310:/310is- 460 p
- OPERATOR’S MANUAL B-64004EN/02 FANUC Series 30*/300*/300*s-MODEL A FANUC Series 31*/310*/310*s-MODEL A5 FANUC Series 31*/310*/310*s-MODEL A FANUC Series 32*/320*/320*s-MODEL A Dual Check Safety 174 p
Questions answered in these manuals
What must be done before replacing a unit?
The CNC power and the main power of the power cabinet must be disconnected before any unit replacement.
From: FANUC Series 30 i/300 i/300 is/31 i/310 i/310 is/32 i/320 i Service Manual
How soon should a backup battery be replaced after a low‑voltage alarm?
The battery should be replaced within one week of the low‑voltage alarm.
From: FANUC Series 30 i/300 i/300 is/31 i/310 i/310 is/32 i/320 i Service Manual
Who is authorized to perform CNC maintenance?
CNC maintenance must be undertaken only by a qualified technician.
How long must power be off before replacing a unit?
Allow at least twenty minutes after turning off the power for residual voltages to dissipate.
What must be done before touching the MDI panel keys after power‑on?
Wait until the position display or alarm screen appears on the CNC screen before touching any MDI panel keys.
How can I avoid tool‑interference problems during automatic operation?
Ensure the tool number programmed for automatic operation matches the actual tool being used.
