Key facts
- Brand
- CENTURION SYSTEMS
- Model
- D10 SMART
- Category
- Automation control Equipment
- Documents
- 3
- Languages
- ES · EN
- Last added
- 2026-11-08
Start here

Centurion Systems D10 SMART / D10 Turbo SMART / D20 SMART Sliding Gate Motor Quick Guide
This quick guide from Centurion Systems (Pty) Ltd is written for installers who are familiar with conventional sliding gate motor installations but not with the special features of the D10 SMART / D10 Turbo SMART / D20 SMART. The D10 SMART is a heavy-duty sliding gate motor for industrial gates up to 1000 kg, while the D10 Turbo SMART suits lighter gates with many daily operations at nearly twice the speed of the standard D10 SMART, though it is not suitable for gates heavier than 250 kg. The D20 SMART moves gates of up to 2000 kg for large, heavy, high-traffic installations.
The guide covers safety instructions, product identification, technical specifications, site preparation, wiring requirements, manual override and installation preparation. The system runs on two 12V 7.2Ah batteries inside the motor kept charged by a switch-mode charger, and a contactless Hall effect sensor provides positional accuracy. The full installation manual is available in the MyCENTSYS Pro mobile app. This manual is written in Spanish.
Centurion Systems D10 SMART specifications
| Input voltage | 90V - 240V AC +/-10% @ 50Hz |
|---|---|
| Maximum operations per day | 750 |
| Motor power | Battery powered (standard capacity 2x 12V 7.2Ah) |
| Motor push force (start) | 40 kgf (D10 SMART) / 24 kgf (D10 Turbo SMART) / 52 kgf (D20 SMART) |
| Maximum door mass | 1000 kg (D10 SMART) / 250 kg (D10 Turbo SMART) / 2000 kg (D20 SMART) |
| Maximum door length | 50 m (D10 SMART / D10 Turbo SMART) / 25 m (D20 SMART) |
| Door speed (varies with load) | Up to 26 m/min (D10 SMART) / 45 m/min (D10 Turbo SMART) / 18 m/min (D20 SMART) |
| Current consumption (motor at rated load) | 8A (D10 SMART) / 10A (D10 Turbo SMART) / 9A (D20 SMART) |
Source: Centurion Systems D10 SMART / D10 Turbo SMART / D20 SMART Sliding Gate Motor Quick Guide
All Centurion Systems D10 SMART documents by type
The shortest path to a working setup, usually only a few pages.
Mounting, wiring and first power-up. Read it before the hardware goes in.
Questions answered in these manuals
Can the D10 Turbo SMART be used on gates heavier than 250 kg?
No, it is not suitable for gates weighing more than 250 kg, because the inertia generated by heavier loads could damage the gearing at such high speeds. For heavier gates the speed must be reduced according to Table 2.
From: Centurion Systems D10 SMART / D10 Turbo SMART / D20 SMART Sliding Gate Motor Quick Guide
Are batteries included with the D10 SMART / D10 Turbo SMART / D20 SMART?
No, the batteries are not included with the D10 SMART / D10 Turbo SMART / D20 SMART.
From: Centurion Systems D10 SMART / D10 Turbo SMART / D20 SMART Sliding Gate Motor Quick Guide
Who should perform the installation?
All installation, repair, and service work must be carried out by a suitably-qualified person.
From: Centurion Systems D10/D10 Turbo/D20 SMART Installation Manual
What safety device is recommended for the mains power supply?
An all-pole switch with a contact opening distance of 3mm or greater is required.
From: Centurion Systems D10/D10 Turbo/D20 SMART Installation Manual
What size gate can the D10 SMART operator handle?
The D10 SMART is a heavy duty sliding gate operator designed to open and close industrial sliding gates weighing up to 1000kg.
From: Centurion Systems D10 Smart / D10 Turbo Smart / D20 Smart Sliding Gate Operator Installation Manual
Can the D10 Turbo SMART be used on heavy gates?
No. It is not suitable for gates weighing more than 250kg, as the inertia of heavier loads could be detrimental to the gearbox at high speeds.
From: Centurion Systems D10 Smart / D10 Turbo Smart / D20 Smart Sliding Gate Operator Installation Manual
